)
)
LOCTITE SF 7063 - CFC-free, solvent-based surface cleaner
Surface cleaner for removing contaminants such as grease, oils and light production residues.
Documents
HS code:
38140090
Product description
LOCTITE® SF 7063 is a CFC-free, solvent-based surface cleaner that quickly and completely removes contaminants such as grease, oil, and light manufacturing residues. With a very low viscosity (≈ 2 mPa·s at 20 °C), the cleaner spreads finely on the surface and evaporates rapidly (flash-off time ≤ 60 s at 20 °C), allowing adhesives to be applied immediately after drying. The formula is based on isoparaffin, dimethoxymethane, and ethanol and appears as a clear, colorless solution.
When used correctly, LOCTITE SF 7063 does not affect the curing and final strength of LOCTITE adhesives; on the contrary: clean surfaces ensure reliable adhesion and consistent quality.
The cleaner is also suitable for maintenance work, such as quickly degreasing machine parts.
Product features
- Technology: solvent-based cleaner, CFC-free.
- Chemical basis: isoparaffin, dimethoxymethane, ethanol.
- Appearance: clear, colorless.
- Viscosity: approx. 2 mPa·s (20 °C).
- Specific density: approx. 0.74 (25 °C).
- Flash-off time: ≤ 60 s (20 °C).
- Application: Surface cleaner before gluing and for maintenance.
Suitable materials
- Metals (e.g. steel, aluminum), ceramics, glass and many other hard, solvent-resistant substrates.
- Note: Certain plastics and coatings may be affected – check compatibility beforehand.
Typical areas of application
- Pretreatment and final cleaning before the use of adhesives in assembly, repair and manufacturing.
- Maintenance/repair: rapid degreasing of machine parts, fixtures and tools.
Processing instructions
- Spray the product onto the surface or apply it with a lint-free paper towel soaked in cleaner.
- While the surface is still wet, wipe it with a clean cloth to remove contaminants and excess solvent.
- Repeat cleaning if necessary.
- Allow to dry completely before gluing to avoid solvent particles in the joining gap.
- Apply adhesive and join the parts.
Advantages at a glance
- Very fast and residue-free drying for rapid processes.
- Clean, adhesive surfaces – consistent bonding results.
- Versatile for use in assembly and maintenance.
Technical data for LOCTITE SF 7063 - CFC-free, solvent-based surface cleaner
| Product information | |
|---|---|
| brand | Loctite |
| Container | 150 ml, 400 ml, 10 l |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Documents and datasheets
Click on a document for a preview or the download icon for a direct download.
No frequently asked questions have been submitted for this product.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Container | 150 ml or 400 ml or 10 l |
| brand | Loctite |
| Keywords | |
|---|---|
| Keywords | |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download: