Luborflon MS 20
PTFE aerosol release agent for rubber and thermosetting plastics.
PTFE aerosol release agent for rubber and thermosetting plastics — silicone-free up to +300 °C, with adhesion additives for metal surfaces and a particle size of 3–4 μm for a uniform non-stick dry film
Documents
Internal reference:
41-853.SP
HS code:
391000000
Luborflon MS 20 is a pTFE aerosol release agent for rubber and thermosetting plastics — silicone-free up to +300 °C, with adhesion additives for metal surfaces and a particle size of 3–4 μm for a uniform non-stick dry film.
Release sprays for composite and reaction casting applications — wax- and silicone-based spray release agents for the clean demolding of polyester, epoxy, and polyurethane resins in model making, boat building, automotive body construction, and industrial applications. Luborflon MS 20 is tailored to specific industrial and workshop applications — the most important properties and areas of application can be found below.
Sansil Luborflon MS 20 is an aerosol dispersion of a PTFE telomer in solvent — specially developed as a release agent for molding rubber and thermosetting plastics. High-temperature resistant up to +300 °C, silicone-free. Additives improve the adhesion of the PTFE particles to metal surfaces. Aerosol spraying produces a very uniform film with 3–4 μm particles — excellent non-stick and dry lubrication properties. Mixing ball for homogenization — shake the bottle before each use.
What makes Luborflon MS 20 stand out
What is Luborflon MS 20 used for?
processing
Recommended accessories
Luborflon MS 20 in comparison
Direct comparison with the related SILISIL sprays — the right choice for your application.
Luborflon MS 20 Current product |
TRS release spray → | G&P Wax Release Spray → | SG-1001S → | |
|---|---|---|---|---|
| Active ingredient base | PTFE telomer | wax | wax | silicone |
| Silicone status | silicone-free | silicone-free | silicone-free | Contains silicone |
| Heat stability | +300 °C | +120 °C | +90 °C | see TDS |
| Suitable resins | Rubber, thermosets | Epoxy, polyester, PU | UP, epoxy, PMMA, PU, silicone rubber | PU, epoxy, thermoplastics |
| Main application | High-temperature release spray | Composite release spray | Universal wax release spray | Universal release spray |
Technical data for Luborflon MS 20
| Product information | |
|---|---|
| Manufacturer | CRC |
| Container | 400 ml |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Frequently asked questions about Luborflon MS 20
Practical questions regarding application and compatibility — answered by SILITECH.
Luborflon MS 20: PTFE aerosol release agent for rubber and thermosetting plastics — silicone-free up to +300 °C, with adhesion additives for metal surfaces and a particle size of 3–4 μm for a uniform, non-stick dry film. Main applications: rubber vulcanization, thermoset mold making, silicone-sensitive processes.
For polyester (UP) and epoxy resin (EP), wax-based sprays are standard (Neukadur P6, G&P wax release spray, TRS release spray) — silicone-free, they allow the component to be painted/bonded. For difficult polyurethane demolding with high requirements or multiple cycles, the silicone-containing ACHEM SG-1001S offers the highest release resistance. For each application: apply a thin, even coat, allow to flash off — often several coats of wax are necessary before the first casting with new molds.
No. Silicone sprays leave a water-repellent silicone film that prevents paints, adhesives, and coatings from adhering. Do not use on surfaces that will later be painted or covered with adhesive film—or clean thoroughly beforehand with SILISIL Silicone Remover.
Store the aerosol can below +50 °C, protect from direct sunlight, and keep away from ignition sources. Do not forcibly open or incinerate pressurized containers, even after use. Shelf life in the unopened original container is according to SDS; please note the printed expiration date.
Polyester/epoxy resin composites: Wax-based sprays — Neukadur P6 (UP/EP special), Wax Release Spray G&P (silicone-free, polishable up to +90 °C), Release Spray TRS (silicone-free up to +120 °C). Polyurethane difficulties: ACHEM SG-1001S with maximum release reserve for multiple demoldings. Food packaging: NSR Food FPS Spray with NSF M1 registration no. 155325. If unsure about material compatibility, always make a small test casting.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Manufacturer | CRC |
| Container | 400 ml |
| Keywords | |
|---|---|
| Keywords | |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download: