Silicones, silicone oils, sprays
Casting and potting resins
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- Permabond
- Manufacturer
- Permabond Engineering Adhesives Ltd
- Container
- 200 ml
- Flash point
- -4°C
Physical Properties
- Color
- colorless
- Specific Gravity
- 0.7
- Boiling point
- 45-100°C
- Evaporation rate
- 4.3
Thermal Properties
- Storage Temperature (°C)
- 5-25
Product Description
Permabond Activator CSA Aerosol is a cyanoacrylate activator in spray (aerosol) form — fast, easy application in everyday industrial use, accelerates curing and enhances gap filling capacity.
Permabond C Surface Activator (CSA) — Activator for cyanoacrylate adhesives; accelerates curing and improves gap-filling capacity, even on difficult or porous substrates. CSA aerosol is tailored to specific applications — the most important properties and areas of use are listed below.
Permabond C Surface Activator as an aerosol — quick and easy spray application for everyday industrial use. Accelerates Permabond CA curing, activates difficult or porous surfaces, and improves gap-filling capacity.
What distinguishes CSA Aerosol
What is CSA aerosol used for?
Processing
Recommended accessories
CSA Aerosol in comparison
Direct comparison with related Permabond products from our range.
CSA Aerosol Current Product |
Activator CSA (1 L) → | CSA NEW (NF) → | POP Primer → | |
|---|---|---|---|---|
| Chemical Base | CA activator (aerosol) | CA Activator (solvent-based) | CA Activator (Non-Flame) | Polyolefin primer |
| Viscosity | Spray | Liquid | Liquid | Liquid |
| Grade | Industrial | Industrial | Industrial | Industrial |
| Color | see TDS | see TDS | see TDS | see TDS |
| Set Time | evaporates | evaporates | evaporates | evaporates |
| Full Cure | in CA reaction | in CA reaction | in CA reaction | in CA reaction |
| Main application | CA Activation Spray | CA Activation Industry | Secure CA activator | PP/PE/PTFE/Silicone CA Bonding |
Frequently Asked Questions about CSA Aerosol
Practical application and design questions — answered by SILITECH.
Permabond Activator CSA Aerosol: Cyanoacrylate activator as a spray (aerosol) — fast, easy application in everyday industrial use, accelerates curing and improves gap-filling capacity. Main applications: Workshop CA bonding, mobile repair, difficult substrates.
CSA activator (C Surface Activator) is applied to substrates prior to cyanoacrylate application if they are: 1) acidic or porous (wood, cardboard, some plastics—delay or prevent CA curing), 2) require large gap widths (CSA increases the gap-filling capacity of CA), 3) require very fast curing (high-throughput production). CSA is brushed or sprayed on, allowed to evaporate briefly, and then CA is applied.
Store in the unopened original container in a dry, cool place — Permabond adhesives typically between +5 and +25 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store cyanoacrylates cool (ideally refrigerated) for maximum shelf life.
In the comparison table above, you will find related Permabond products with different properties — viscosity, mixing ratio, special certification. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate pairing, load, curing condition).