Silicones, silicone oils, sprays
Casting and potting resins
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Manufacturer
- Permabond Engineering Adhesives Ltd
- Brand
- Permabond
- Container
- 50 ml
- Country of origin
- Italy
Performance at Full Cure
- Torque strength (M10 steel ISO10964) Breakloose
- 32 Nm
- Torque strength (M10 steel ISO10964) Prevailing
- 57 Nm
- Shear strength (steel ISO10123)
- 30 MPa
- Dielectric Strength
- 11 kV/mm
- Thermal conductivity
- 0.19 W/(m.K)
Physical Properties
- Chemical group
- Acrylic one-component
- Color
- green
- Viscosity (adhesives)
- 1000
- Specific Gravity
- 1.1
- Fluorescence
- Yes
Curing values
- Fixture time on steel (sec.)
- 360
- Functional strength (M10 steel)@23°C
- 1-3 hours
- Ultimate strength (M10 steel)@23°C
- 24 hours
Thermal Properties
- Operating temperature (°C)
- -55 to 200
- Storage Temperature (°C)
- 5-25
- Coefficient of thermal expansion
- 90 x 10-6 mm/mm/°C
Features
- Gap fill up to
- 0.2mm
Product Description
Permabond HM162 is a high-strength anaerobic shaft-hub adhesive (retainer) — with a shear strength of 30 MPa, it is the strongest member of the anaerobic family for highly stressed cylindrical fits.
With a viscosity of 1,000 mPa·s, HM162 is low-viscosity and fills adhesive gaps up to 0.2 mm. Its high shear strength of 30 MPa qualifies the product for the most demanding shaft-hub connections—bearings, bushings, and torque transmission applications in heavy industry.
With a breakaway strength of 32 N·m and a further strength of 57 N·m, HM162 is in the high-strength range — disassembly typically requires heating. Its low viscosity ensures complete gap hardening, even in tightly toleranced H7/h6 fits.
30 MPa shear strength — the highest value in the Permabond Anaerobic family. High-strength shaft-hub adhesive for highly stressed cylindrical fits. Low viscosity for tightly toleranced adhesive gaps down to 0.2 mm.
What distinguishes Permabond HM162
What is Permabond HM162 used for?
Processing
Recommended accessories
Important Notes
Which Permabond anaerobic adhesive for which application?
Permabond HM162 in direct comparison with related products of the A series.
Permabond HM162 Current Product | Permabond A1042 → | Permabond HM163 → | Permabond HM165 → | |
|---|---|---|---|---|
| Application / Strength | High-strength, low-viscosity shaft-hub adhesive | A-series, fast curing | Higher viscosity | Pasty, coarser tolerances |
| Viscosity | 1,000 mPa·s | — | 3,500 mPa·s | 25,000 mPa·s |
| Max. gap fill. | 0.2 mm | 0.25 mm | 0.2 mm | 0.3 mm |
| Breakaway Torque | 32 N·m | 30 N·m | 30 N·m | 35 N·m |
| Prevailing torque | 57 N·m | 50 N·m | 55 N·m | 50 N·m |
Frequently asked questions about Permabond HM 162
Practical application and design questions — answered by SILITECH.
Permabond HM162 is an anaerobic acrylic adhesive with a viscosity of 1,000 mPa·s and a gap-filling capacity of up to 0.2 mm. This high-strength, low-viscosity shaft-hub adhesive boasts a shear strength of 30 MPa, the highest value in the anaerobic family. Anaerobic adhesives cure in the absence of air and in contact with metal—ideal for tight-tolerance metallic joints.
Anaerobic adhesives like Permabond HM162 remain liquid in the bottle (due to contact with air and oxygen) and only begin to harden after bonding under anaerobic conditions and metal-to-metal contact. Curing starts at the metal surface and progresses into the bond gap. The product cures quickly on steel and copper; on stainless steel and zinc, the Permabond A905 activator may be beneficial.
Yes — Permabond HM162 is a low-strength threadlocker (32 N·m breakaway torque) and can be loosened at any time with standard tools without heating. Designed for maintenance and service.
Permabond HM162 does not have specific industry approvals such as WRAS or KTW (drinking water). For general industrial applications, the product is approved according to Permabond's internal specifications; however, product-specific testing prior to series production is recommended.
Permabond HM162 typically reaches handling strength after 15 minutes and functional strength after 1 hour at 23 °C on M10 steel. Final strength is reached after 24 hours. On inactive surfaces (stainless steel, zinc) or at low temperatures, the curing time is extended—Permabond A905 activator accelerates the process.
Permabond HM162 is a high-strength, low-viscosity shaft-hub adhesive (1,000 mPa·s viscosity, 0.2 mm gap filling, 32 N·m breakaway torque). Permabond A1042 is a high-strength, fast-curing adhesive (—, 0.25 mm, 30 N·m breakaway torque) — A-series, fast curing. Both belong to the anaerobic Permabond A-series.
The choice depends on the application: Permabond HM162 (high-strength, low-viscosity shaft-hub adhesive); Permabond A1042 (high-strength, fast-curing); Permabond HM163 (high-strength, medium-viscosity); Permabond HM165 (high-strength paste). For inactive surfaces (stainless steel, zinc, aluminum), Permabond A905 activator be used to accelerate curing.