PERMABOND Initiator 43
No-mix activator for Permabond TA structural adhesives.
No-Mix Activator (Green, 10 mPa·s) for Permabond TA structural adhesives — alternative variant to Initiator 41 with green color for visual mixing control
Documents
Internal reference:
49-443.FL.G020
Permabond Initiator 43 is a no-mix activator (Green, 10 mPa·s) for Permabond TA structural adhesives — an alternative variant to Initiator 41 with a green color for visual mixing control.
Permabond initiators for the TA structural adhesive range — no-mix activators for brushing or spraying on before the acrylate adhesive for immediate or delayed curing. Initiator 43 is tailored to specific applications — its key properties and areas of use are listed below.
Permabond Initiator 43 is the green, low-viscosity variant (10 mPa·s) for the Permabond TA series — same no-mix function as Initiator 41, with green coloring for visual mixing control and lower viscosity for spray application.
What distinguishes Initiator 43
What is Initiator 43 used for?
processing
Recommended accessories
Initiator 43 in comparison
Direct comparison with related Permabond products in our range.
Initiator 43 Current product |
Initiator 41 → | Initiator 46 → | CSA activator (1 L) → | |
|---|---|---|---|---|
| Chemical basis | Activator (No-Mix) | Activator (No-Mix) | Activator (No-Mix Aerospace) | CA activator (solvent-based) |
| viscosity | 10 mPa·s | <50 mPa·s | 70 mPa·s | fluid |
| Grade | Industrial | Industrial | Aerospace TA4246 | Industrial |
| Color | Green | Amber | Amber | see TDS |
| SetTime | 30 min On-Part | 30 min On-Part | 30 min On-Part | evaporates |
| Full Cure | TA system dependent | TA system dependent | TA system dependent | in CA reaction |
| Main application | TA activator (injection) | Permabond TA activator | Aerospace TA4246 | CA Activation Industry |
Technical data for PERMABOND Initiator 43
| Product information | |
|---|---|
| brand | Permabond |
| Container | 20 ml |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Documents and datasheets
Click on a document for a preview or the download icon for a direct download.
Technical Data Sheets (TDS) 2
Frequently asked questions about Initiator 43
Practical application and design questions — answered by SILITECH.
Permabond Initiator 43: No-mix activator (green, 10 mPa·s) for Permabond TA structural adhesives — an alternative to Initiator 41 with a green color for visual mixing control. Main applications: Permabond TA range, spray application, industrial structural bonding.
Permabond TA structural adhesives utilize a no-mix system: initiator is brushed onto one bonding surface, TA adhesive onto the other—they react between the components during joining. No pre-mixing is required, and there is no pot life limit on the mixed compound. On-part life is 30 minutes—components can be joined with the TA adhesive after a delay following initiator application. Ideal for high-throughput structural bonding.
Store in the unopened original container in a dry, cool place — Permabond adhesives typically between +5 and +25 °C, see TDS for exact values. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store cyanoacrylates in a cool place (ideally refrigerated) for maximum shelf life.
The comparison table above lists related Permabond products with different properties—viscosity, mixing ratio, special certification. If you are unsure which product is best, we would be happy to advise you—contact SILITECH with your specific application (substrate pairing, load, curing conditions).
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| brand | Permabond |
| Container | 20 ml |
| Keywords | |
|---|---|
| Keywords | |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download:
- Permabond Initiator 43 - Fiche de Sécurité FR.pdf (306 KB)
- Permabond Initiator 43 - Safety Data Sheet EN.pdf (303 KB)
- Permabond Initiator 43 - Safety Data Sheet DE.pdf (307 KB)
- Permabond Initiator 43 - Technical Data Sheet EN.pdf (503 KB)
- Permabond Initiator 43 - Technical Data Sheet EN.pdf (297 KB)