Silicones, silicone oils, sprays
Casting and potting resins)
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- Permabond
- Container
- 50 ml, 400 ml
Product Description
Permabond MT382 is a 2K modified epoxy adhesive for bonding, sealing and potting applications — excellent adhesion to nylon, ABS, polycarbonate, self-leveling.
Permabond two-component epoxy adhesives — room temperature curing, with good gap filling, excellent multi-substrate adhesion and potting suitability. MT382 is tailored to specific applications — the most important properties and areas of application are listed below.
Permabond MT382 is a modified 2-component epoxy adhesive for bonding, sealing, and potting applications — offering excellent adhesion to difficult-to-bond engineering plastics such as nylon, ABS, and polycarbonate. It is self-leveling and easy to process.
What distinguishes MT382
What is the MT382 used for?
Processing
Recommended accessories
MT382 in comparison
Direct comparison with related Permabond products from our range.
MT382 Current Product |
MT3821 → | Double/Bubble E01 → | MT 3836 → | |
|---|---|---|---|---|
| Chemical Base | 2K modified epoxy | 2K modified epoxy (flexible) | 2K Epoxy | 2K hybrid silane polymer |
| Viscosity | self-leveling | thixotropic | pasteus | paste-like |
| Grade | Industrial | Industrial | Industrial | Industrial / UL 94 V-0 |
| Color | see TDS | black | see TDS | see TDS |
| Set Time | min. | min. | a few minutes | min. |
| Full Cure | 24 h RT | 24 h RT | 24 h RT | 24–48 h RT |
| Main application | Engineering plastics + potting | Flexible adhesive, black | Mobile repair | Fire protection + thermal conductivity |
Frequently Asked Questions about MT382
Practical application and design questions — answered by SILITECH.
Permabond MT382: 2K modified epoxy adhesive for bonding, sealing, and potting applications — excellent adhesion to nylon, ABS, and polycarbonate; self-leveling. Main applications: engineering plastic bonding, potting, and structural bonding.
Selection criteria: 1) Substrate (engineering plastics such as nylon/ABS/PC require modified epoxies like MT382), 2) Gap width (large gaps: thixotropic variants), 3) Flexibility (tolerance compensation: flexible variants like MT3821), 4) Mixing ratio (1:1 simple, 2:1 or 10:1 for defined properties), 5) Pot life (short for high throughput, long for careful processing). SILITECH provides consultation for selection.
Store in the unopened original container in a dry, cool place — Permabond adhesives typically between +5 and +25 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store cyanoacrylates cool (ideally refrigerated) for maximum shelf life.
In the comparison table above, you will find related Permabond products with different properties — viscosity, mixing ratio, special certification. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate pairing, load, curing condition).