Silicones, silicone oils, sprays
Casting and potting resins)
HS Code:
38012090
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- Bonderite
- Product type
- Water-based graphite lubricant
- Container
- 1 kg, 5 kg, 25 kg, 220 kg
- Temperature resistance
- up to 315 °C (briefly up to 1200 °C)
Physical Properties
- Color
- Black-grey
- Density
- 1.1 g/cm3
Features
- Viscosity at 20 °C
- < 200 mPas
- PH value
- approximately 11
- VOC content
- 0%
Product Description
Bonderite L-FG ADAG C EU 18% is Bonderite forging release agent of the Adag-C series (18% concentrate) for defined forging applications — detailed specification via SILITECH consultation.
Bonderite L-FG lubricants from Henkel/Acheson are specially formulated for forging and extrusion applications — water- or oil-based graphite and MoS₂ dispersions with excellent lubrication and release properties at high tool temperatures. L-FG ADAG C EU 18% is tailored to specific industrial applications — the most important properties and areas of application are listed below.
Bonderite L-FG ADAG C EU 18% is a forging release agent concentrate (18% solids) from the Henkel Adag range. Detailed specifications, dilution instructions, and application recommendations are available from SILITECH.
What distinguishes L-FG ADAG C EU 18%
What is L-FG ADAG C EU 18% used for?
Processing
Recommended accessories
L-FG ADAG C EU 18% in comparison
Direct comparison with related Bonderite products from our range.
L-FG ADAG C EU 18% Current Product |
L-FG 31 → | L-FG F 31 → | L-FG F 605 → | |
|---|---|---|---|---|
| Technology | Forging release agent concentrate | Water-based graphite forging release agent | Water-based graphite die lubricant | Synthetic die lubricant |
| Base material | Bonderite Adag range | Microfine graphite + stabilizer | High-purity micrographite | Synthetic lubricants |
| Carrier | see TDS | Water | Water | Water |
| Application | Forging | Semi-warm/Warm Forging | Hot/warm/precision forging | Hot forging of ferrous metals |
| Temperature range | High-temperature forging | High-temperature forging | High-temperature forging | High-temperature forging |
| Main application | Forging Concentrate | Forging Standard | Die Forging Lubrication Premium | Graphite-free Forging |
Frequently asked questions about L-FG ADAG C EU 18%
Practical application and design questions — answered by SILITECH.
Bonderite L-FG ADAG C EU 18%: Bonderite forging release agent of the Adag-C series (18% concentrate) for defined forging applications — detailed specifications available through SILITECH consultation. Main applications: Special forging applications, high dilution ratios, OEM applications.
Forging release agents are applied to the hot forging tool — at tool temperature, they form a lubricating film of micro-fine graphite (or synthetic lubricants in graphite-free variants such as F 605). They reduce friction between the workpiece and the die, extend tool service life, and enable higher dilution ratios. Bonderite L-FG 31 + F 31 (Deltaforge) are the most widely used standards worldwide.
Store in the unopened original container in a dry, cool place — typically between +5 and +40 °C, exact values see TDS. Protect water-based products from frost. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store aerosol sprays at low temperature and in a well-ventilated area.
In the comparison table above, you will find related Bonderite products with different properties — different carrier, different solid lubricant, different temperature range, or different application specialization. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate, temperature, load, processing workflow).