Silicones, silicone oils, sprays
Casting and potting resins
Internal Reference:
43-749.SP.ML400
HS Code:
34039900
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- Bonderite
- Container
- 400 ml
- UFI (Unique Formula Identifier)
- 00MG-3W68-N200-S72H
Product Description
Bonderite L-GP BND60A Spray is a refractory coating based on boron nitride (PULVE BND 60A) — heat-resistant up to +1'000 °C, with non-stick, insulating, and refractory properties, polymerizing in 15 minutes at room temperature.
Bonderite L-GP dry-film lubricants from Henkel/Acheson — graphite, PTFE, MoS₂, or boron nitride dispersions that form a firmly adhering film with low coefficient of friction and release properties after drying. L-GP BND60A is tailored to specific industrial applications — the key properties and areas of use are listed below.
Bonderite L-GP BND60A (formerly Pulve BND 60A) is a refractory coating based on boron nitride as an aerosol — heat-resistant up to +1'000 °C, non-stick, insulating, refractory. Polymerizes at room temperature in 15 minutes. Proven protection for MAG/MIG welding nozzles, holders, and contact tubes.
What sets L-GP BND60A apart
What is L-GP BND60A used for?
Processing
Recommended accessories
L-GP BND60A in comparison
Direct comparison with related Bonderite products from our range.
L-GP BND60A Current Product |
L-GP BN 4479 FA → | L-GP D31 A → | L-GP D18A → | |
|---|---|---|---|---|
| Technology | Refractory boron nitride coating | Boron nitride dispersion | Lamellar graphite aerosol | MoS₂ aerosol |
| Base material | Boron nitride | Crystalline boron nitride | Pure lamellar graphite | Molybdenum Disulfide |
| Carrier | Aerosol solvent | Solvent | Aerosol | Aerosol |
| Application | High-temperature protection | Anti-diffusion barrier | High-temperature dry film | Extreme Dry Film |
| Temperature range | +1'000 °C | +1'000/+2'000 °C | +1'000 °C | –200/+390 °C |
| Main application | Welding nozzle protection | Titanium SPF-DB | Lamellar Graphite Spray | MoS₂ Extreme Lubrication |
Frequently asked questions about L-GP BND60A
Practical application and design questions — answered by SILITECH.
Bonderite L-GP BND60A Spray: Refractory coating based on boron nitride (PULVE BND 60A) — heat-resistant up to +1,000 °C, non-stick, insulating and refractory properties, polymerizes in 15 minutes at room temperature. Main applications: MAG/MIG welding nozzles, welding fixtures, non-stick for glass molds.
After evaporation of the carrier (water, solvent, or MIBK), dry film lubricants form a firmly adhering lubricating film of solid lubricant (graphite, MoS₂, PTFE, or boron nitride). Advantages over liquid lubricants: no migration, lifelong lubrication in many applications, high-temperature suitability, substrate versatility (wood, metal, plastic, glass), electrically conductive possible (graphite) or highly insulating (boron nitride).
Store in the unopened original container in a dry, cool place — typically between +5 and +40 °C, exact values see TDS. Protect water-based products from frost. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store aerosol sprays at low temperature and in a well-ventilated area.
In the comparison table above, you will find related Bonderite products with different properties — different carrier, different solid lubricant, different temperature range, or different application specialization. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate, temperature, load, processing workflow).