Silicones, silicone oils, sprays
Casting and potting resins)
HS Code:
39100000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Physical and thermal
- Density (23 °C)
- 1 g/cm³
- Temperature resistance (duration)
- -40 to 200 °C
- Peak temperature (briefly)
- 200 °C
- Flash point
- 180 °C
Storage
- Shelf life in original packaging
- 24 months
- Storage Temperature
- -20 to 50 °C
Product Information
- Manufacturer
- Elkem Silicones
- Curing type
- Non-reactive
- Number of components
- 1K (one-component)
- Consistency
- Flowable
- Mixing Ratio
- One-component
- Brand
- Silbione
- Container
- 1 kg, 5 kg, 25 kg, 200 kg
Further Properties
- UV resistance
- Yes
Physical Properties
- Cured Color
- Transparent
- Self-leveling
- Yes
- Uncrosslinked viscosity (mPa·s)
- 30
Electrical Properties
- Electrical Insulation
- No
Product Approvals
- Food contact
- Yes
- Medical grade
- Yes
Product Description
Silbione Resin 76405 is a medical-grade silicone resin from the Silbione range — biocompatible for pharmaceutical, medical device and cosmetic applications with pharmaceutical requirements.
Bluesil/Silbione silicone resins — methylsiloxane solution resins for high-temperature coatings, powder coating binders, impregnation, and electrical insulation. Silbione Resin 76405 is tailored to specific applications — the most important properties and areas of use are listed below.
Silbione Resin 76405 is a medically approved silicone resin from the Silbione range — biocompatible and tested for pharmaceutical and medical device applications. Proven in pharmaceutical coatings, medical device coatings, and premium cosmetic formulations.
What distinguishes Silbione Resin 76405
What is Silbione Resin 76405 used for?
Processing
Silbione Resin 76405 in comparison
Direct comparison with related resin products in our range. “— " = not specified in the data sheet.
Silbione Resin 76405 Current Product |
Silbione DM 300 GMP → | Silbione 70047 V 12500 → | Silbione 70047 V 350 → | |
|---|---|---|---|---|
| Resin type | Medical-grade resin | Dimethicone, GMP | PDMS, Pharma-Grade | PDMS, Medical Grades |
| Solvent | see TDS | — | — | — |
| Solid content | see TDS | — | — | — |
| Viscosity | see TDS | 300 cSt | 12,500 mm²/s | 350 mm²/s |
| Color | see TDS | — | — | — |
| Main application | Pharma / Medical | Pharma Excipient (GMP) | Premium pharmaceuticals / cosmetics | Medicine / Dermatology |
Frequently asked questions about Silbione Resin 76405
Practical application and design questions — answered by SILITECH.
Silbione Resin 76405: Medical-grade silicone resin from the Silbione series — biocompatible for pharmaceutical, medical device, and cosmetic applications with pharmaceutical requirements. Main applications: pharmaceutical coatings, medical device coating, premium cosmetics.
Silicone resins are typically used as coatings or binder components. They are applied by spraying, dipping, or brushing. After application, the solvent evaporates, and the resin typically cures upon heating. The exact processing method depends on the specific application—see the Technical Data Sheet (TDS) or contact SILITECH for advice.
Store in the unopened original container in a dry, cool place — typically standard between +5 and +30 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiration date on the packaging — Elkem guarantees the sales specifications only up to the stated date.
In the comparison table above, you will find related products with similar functions or related specifications. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your application (desired property, substrate, processing workflow).