)
SILISIL DEADNER
SILISIL DEADNER — Additive silicone, platinum-curing, available from Swiss stock.
SILISIL DEADNER — additive (DEADNER / DELAYER).
Targeted modification of the crosslinking kinetics. Available from Swiss warehouses with SDS and TDS.
Documents
HS code:
3910.0000
SILISIL DEADNER — Additive (DEADNER / DELAYER)
SILISIL DEADNER is an additive for 2K addition silicones from the SILISIL product line. The additives are incorporated into the A component in small doses and selectively modify the curing kinetics or final hardness of the silicone system.
Product benefits
- 2K addition system with precisely calibrated mixing ratio
- Shrinkage-resistant and dimensionally stable even after extended periods of inactivity
- High tear and tear propagation strength
- Excellent detail reproduction, even at the microscopic level
- Long mold lifespan with proper processing
- Compatible with most common casting and molding materials
Typical applications
- Kinetic adjustment: Extending the pot life during longer casting processes
- Softening: Targeted reduction of final hardness (DEADNER)
- Process control: Adjusting the setting time to operational processes
- Formulation: Fine-tuning of the rheological properties
Processing and mixing
- The exact mixing ratio, pot life and demolding time can be found in the technical data sheet (TDS) on this product page
- Before processing, stir both components separately and then mix thoroughly in the specified ratio
- Degassing under vacuum (30–50 mbar) eliminates air inclusions and improves surface quality
- Ideally, processing should take place at 23 °C and 40–60% relative humidity
- Contamination by sulfur, amines, tin catalysts or PVC must be avoided in platinum-crosslinked systems — they prevent curing
Storage and shelf life
- Store in unopened original packaging at 5–25 °C, in a dry place and protected from sunlight
- Shelf life from date of manufacture as stated in the TDS — typically 12–24 months
- Carefully reseal after opening
Included documentation
- Technical Data Sheet (TDS) in German, English and French
- Safety Data Sheet (SDS) according to REACH
- Batch certificate available upon request
SILISIL DEADNER is tested and manufactured by SILITECH AG in Switzerland. Our silicone specialists are always available to advise you on the appropriate Shore hardness, the choice between the different SILISIL series, or formulation development.
Technical data for SILISIL DEADNER
| Product information | |
|---|---|
| brand | SILISIL |
| Networking type | Addition (Platinum) |
| Container | 250 ml, 1 kg, 5 kg |
| Physical properties | |
|---|---|
| Paint has hardened | Transparent |
| Self-leveling | Yes |
| Density (g/cm³) | 0.97 |
| Viscosity uncrosslinked (mPa·s) | 2000 |
| Product approvals | |
|---|---|
| Food contact | No |
| Suitable for medical use | No |
| Certificates | RoHS, REACH |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Frequently asked questions about SILISIL DEADNER
The most important answers regarding areas of application, processing and availability.
SILISIL DEADNER is an additive silicone and is primarily used for modifying the crosslinking kinetics of other silicone systems.
SILISIL DEADNER is an additive system. The exact values are stored as product attributes and can be filtered in the shop.
SILISIL DEADNER has the following mechanical and physical properties (according to TDS, measured at 23 °C): density 0.97 g/cm³, viscosity (uncrosslinked) 2000 mPa·s.
SILISIL DEADNER is available from our Swiss warehouse in various container sizes — the exact fill quantities are listed as product variants on this page. For non-standard quantities or sample quantities, please contact our sales department.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Product information | |
|---|---|
| Container | 250 ml or 1 kg or 5 kg |
| brand | SILISIL |
| Networking type | Addition (Platinum) |
| Physical properties | |
|---|---|
| Paint has hardened | Transparent |
| Self-leveling | Yes |
| Density (g/cm³) | 0.97 |
| Viscosity uncrosslinked (mPa·s) | 2000 |
| Product approvals | |
|---|---|
| Certificates | RoHS or REACH |
| Food contact | No |
| Suitable for medical use | No |
| Keywords | |
|---|---|
| Keywords | |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download: