)
SILISIL PC-Curing Agent NF
SILISIL PC-Curing Agent NF — Curing agent silicone, platinum crosslinking, available from Swiss warehouse.
SILISIL PC Curing Agent NF — PC Curing Agent.
Matching B-component for the PC system. Available from Swiss warehouse with SDS and TDS.
Documents
HS code:
3910.0000
SILISIL PC Curing Agent NF — PC Curing Agent
SILISIL PC-Curing Agent NF is the hardener component of the SILISIL Platin-Cast 2K system. The different curing agent variants (Standard, PU, NF) are tailored to different base components and processing conditions.
Product benefits
- 2K addition system with precisely calibrated mixing ratio
- Shrinkage-resistant and dimensionally stable even after extended periods of inactivity
- High tear and tear propagation strength
- Excellent detail reproduction, even at the microscopic level
- Long mold lifespan with proper processing
- Compatible with most common casting and molding materials
Typical applications
- Electronic potting: PU variant for PU-compatible systems
- Mold making: Standard variant for universal use
- Special applications: NF variant for non-flammable requirements
- Prototyping: Adaptation to the base component used
Processing and mixing
- The exact mixing ratio, pot life and demolding time can be found in the technical data sheet (TDS) on this product page
- Before processing, stir both components separately and then mix thoroughly in the specified ratio
- Degassing under vacuum (30–50 mbar) eliminates air inclusions and improves surface quality
- Ideally, processing should take place at 23 °C and 40–60% relative humidity
- Contamination by sulfur, amines, tin catalysts or PVC must be avoided in platinum-crosslinked systems — they prevent curing
Storage and shelf life
- Store in unopened original packaging at 5–25 °C, in a dry place and protected from sunlight
- Shelf life from date of manufacture as stated in the TDS — typically 12–24 months
- Carefully reseal after opening
Included documentation
- Technical Data Sheet (TDS) in German, English and French
- Safety Data Sheet (SDS) according to REACH
- Batch certificate available upon request
SILISIL PC-Curing Agent NF is tested and packaged by SILITECH AG in Switzerland. Our silicone specialists are available at any time to advise you on the appropriate Shore hardness, the choice between the various SILISIL series, or formulation development.
Technical data for SILISIL PC-Curing Agent NF
| Product information | |
|---|---|
| Mixing ratio | 100:5 |
| Networking type | Addition (Platinum) |
| Container | 10 kg |
| Container | 50g, 250g, 1kg, 5kg, 10kg |
| brand | SILISIL |
| Physical properties | |
|---|---|
| Paint has hardened | Transparent |
| Self-leveling | Yes |
| Density (g/cm³) | 1.17 |
| Viscosity uncrosslinked (mPa·s) | 50'000 |
| Electrical properties | |
|---|---|
| Electrical insulation | Yes |
| Curing values | |
|---|---|
| Potting time (min) | 60 |
| Demolding time (min) | 24 |
| Product approvals | |
|---|---|
| Food contact | No |
| Suitable for medical use | No |
| Certificates | RoHS, REACH |
| Mechanical properties | |
|---|---|
| Tensile strength (MPa) | 2.5 |
| Elongation at break (%) | 450 |
| Tensile strength (N/mm) | 16 |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Frequently Asked Questions about SILISIL PC-Curing Agent NF
The most important answers regarding areas of application, processing and availability.
SILISIL PC-Curing Agent NF is a curing agent silicone and is primarily used as a hardener component in 2K silicone systems.
SILISIL PC-Curing Agent NF is a curing agent system with a mixing ratio of 100:5, a pot life of approximately 60 minutes at 23 °C, and a demolding time of approximately 24 minutes. The exact values are stored as product attributes and can be filtered in the shop.
SILISIL PC-Curing Agent NF has the following mechanical and physical properties (according to TDS, measured at 23 °C): tensile strength 2.5 N/mm², elongation at break 450%, tear strength (Die B) 16 N/mm, density 1.17 g/cm³, viscosity (uncrosslinked) 50000 mPa·s.
SILISIL PC-Curing Agent NF is available from our Swiss warehouse in various container sizes — the exact fill quantities are listed as product variants on this page. For non-standard quantities or sample quantities, please contact our sales department.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Product information | |
|---|---|
| Container | 50 g or 250 g or 1 kg or 5 kg or 10 kg |
| Mixing ratio | 100:5 |
| Networking type | Addition (Platinum) |
| Container | 10 kg |
| brand | SILISIL |
| Physical properties | |
|---|---|
| Paint has hardened | Transparent |
| Self-leveling | Yes |
| Density (g/cm³) | 1.17 |
| Viscosity uncrosslinked (mPa·s) | 50'000 |
| Electrical properties | |
|---|---|
| Electrical insulation | Yes |
| Curing values | |
|---|---|
| Potting time (min) | 60 |
| Demolding time (min) | 24 |
| Product approvals | |
|---|---|
| Certificates | RoHS or REACH |
| Food contact | No |
| Suitable for medical use | No |
| Mechanical properties | |
|---|---|
| Tensile strength (MPa) | 2.5 |
| Elongation at break (%) | 450 |
| Tensile strength (N/mm) | 16 |
| Keywords | |
|---|---|
| Keywords | |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download: