Silicones, silicone oils, sprays
Casting and potting resins)
Internal reference:
40-198.FA.K135
HS code:
39100000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- SILISIL
- Curing type
- Non-reactive
- Container
- 135 kg
Physical Properties
- Cured Color
- Transparent
- Viscosity (cSt)
- 500'000 cSt
- Density (g/cm³)
- 0.978 g/cm³
Electrical Properties
- Electrical Insulation
- Yes
Product Approvals
- Food contact
- No
- Medical grade
- No
- Certificates
- RoHS, REACH
Thermal Properties
- Flash point (°C)
- >300 °C
- Pour point (°C)
- -48 °C
Product Description
SILISIL Silicone Oil 500'000 cSt is an ultra-high viscosity PDM — antifoam concentrate and premium conditioner base for special applications.
SILISIL Silicone Oils are high-purity linear polydimethylsiloxane (PDMS) liquids with a purity of 100%. Their viscosity of 500,000 cSt defines their range of applications — from lubrication and release agents to hydraulic functions and specialized care and industrial applications.
500,000 cSt provides antifoaming action at dosages as low as 1 ppm — the most economical solution for foam control in petroleum and petrochemical processes. Recommended processing: Dilution in hydrocarbon solvents.
What distinguishes SILISIL Silicone Oil 500,000 cSt
What is SILISIL Silicone Oil 500,000 cSt used for?
Important Notes
Which viscosity for which application?
SILISIL Silicone Oil 500,000 cSt in direct comparison with related viscosities in our product range.
500'000 cSt Current Product |
300'000 cSt → | 1,000,000 cSt → | 100'000 cSt → | |
|---|---|---|---|---|
| Viscosity (cSt) | 500'000 | 300'000 | 1'000'000 | 100'000 |
| Main application | Petroleum Extraction & Refining | Antifoam in petroleum & petrochemicals | Premium Petroleum Industry | Antifoam in the petroleum industry |
Frequently Asked Questions about SILISIL Silicone Oil 500,000 cSt
Practical application and design questions — answered by SILITECH.
SILISIL Silicone Oil 500,000 cSt: Ultra-high viscosity PDMS — antifoam concentrate and premium conditioner base for specialized applications. Main applications include petroleum production and refining, premium hair care, and detangling.
PDMS (polydimethylsiloxane) is a linear silicone fluid that combines high thermal stability, low surface tension, very good dielectric properties, and broad temperature resistance. The viscosity (measured in centistokes, cSt) determines the field of application — low viscosities are suitable for volatile applications and lubrication, high viscosities for damping and conditioners.
SILISIL Silicone Oils are soluble in aromatic, aliphatic, and chlorinated solvents (e.g., toluene, xylene, hexane, diesel). They are not miscible with water and alcohols. For anti-foam applications, high-viscosity PDMS is diluted in hydrocarbon solvents and introduced using a dosing pump.
Store in the unopened original container at room temperature (ideally below 60 °C). Avoid eye contact. SILISIL Silicone Oils are generally non-toxic, odorless, and tasteless — nevertheless, consult the Safety Data Sheet (SDS), which is available in the "Documents" tab.
Viscosity determines the application. 500,000 cSt is optimal for: crude oil production & refining and similar application profiles. For other application characteristics, you will find related viscosities in the comparison table above — if you are unsure, we will be happy to advise you on your specific application.