Silicones, silicone oils, sprays
Casting and potting resins
Internal reference:
43-5721.SP.ML400
HS code:
38011000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- Bonderite
- Container
- 400 ml
- Technology
- Lubricant
- Product type
- Graphite spray
- Application
- General lubrication
Physical Properties
- Appearance
- smooth, blackish-grey film
Features
- Solid lubricant
- Graphite
- Dry film graphite
- 85 %
Product Description
Bonderite L-GP D31 A Spray is a lamellar graphite aerosol (Pulvegraph D31A) for heat-resistant coatings up to +1,000 °C — polymerizes at ambient temperature in 15 min, coating improves at operating temperatures.
Bonderite L-GP dry film lubricants from Henkel/Acheson — graphite, PTFE, MoS₂, or boron nitride dispersions that, after drying, form a tightly adhering film with a low coefficient of friction and release properties. L-GP D31 A is tailored to specific industrial applications — the most important properties and areas of application are listed below.
Bonderite L-GP D31A (formerly Pulvegraph D31A) is an aerosol based on pure, low-friction lamellar graphite — heat-resistant, lubricating coatings up to at least +1,000 °C. Polymerization at ambient temperature takes 15 minutes. At operating temperatures, the film continues to cure — refractory properties improve. At 600 °C for 30 minutes: no weight loss.
What distinguishes L-GP D31 A
What is L-GP D31 A used for?
Processing
Recommended accessories
L-GP D31 A in comparison
Direct comparison with related Bonderite products from our range.
L-GP D31 A Current Product |
L-GP BND60A → | L-GP D18A → | L-GP 2404 → | |
|---|---|---|---|---|
| Technology | Lamellar graphite aerosol | Refractory boron nitride coating | MoS₂ aerosol | Solvent-based graphite dispersion |
| Base material | Pure lamellar graphite | Boron nitride | Molybdenum Disulfide | High-purity graphite |
| Carrier | Aerosol | Aerosol solvent | Aerosol | White spirit |
| Application | High-temperature dry film | High-temperature protection | Extreme Dry Film | Dry film lubrication |
| Temperature range | +1'000 °C | +1'000 °C | –200/+390 °C | +400 °C / +1200 °C inert |
| Main application | Lamellar Graphite Spray | Welding nozzle protection | MoS₂ Extreme Lubrication | High-temperature dry film |
Frequently asked questions about L-GP D31 A
Practical application and design questions — answered by SILITECH.
Bonderite L-GP D31 A Spray: Lamellar graphite aerosol (Pulvegraph D31A) for heat-resistant coatings up to +1,000 °C — polymerizes at ambient temperature in 15 minutes, coating improves at operating temperatures. Main applications: High-temperature release, weld protection, glass mold non-stick.
After evaporation of the carrier (water, solvent, or MIBK), dry film lubricants form a firmly adhering lubricating film of solid lubricant (graphite, MoS₂, PTFE, or boron nitride). Advantages over liquid lubricants: no migration, lifelong lubrication in many applications, high-temperature suitability, substrate versatility (wood, metal, plastic, glass), electrically conductive possible (graphite) or highly insulating (boron nitride).
Store in the unopened original container in a dry, cool place — typically between +5 and +40 °C, exact values see TDS. Protect water-based products from frost. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store aerosol sprays at low temperature and in a well-ventilated area.
In the comparison table above, you will find related Bonderite products with different properties — different carrier, different solid lubricant, different temperature range, or different application specialization. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate, temperature, load, processing workflow).