TEROSON MS 935 grey (290 ml)

TEROSON MS 935 is a high-quality, one-component adhesive and sealant based on silane-modified polymers (SMP). It is characterized by high initial tack, excellent UV resistance, and a wide range of applications in industry, automotive manufacturing, and trades. The product cures through exposure to atmospheric moisture to form a permanently elastic bond and is ideally suited for elastic bonding as well as seam and joint sealing in interior and exterior applications.

TEROSON MS 935 is free of solvents, silicones, PVC, and isocyanates, and offers excellent adhesion to many substrates. Its high sag resistance ensures a stable bond immediately after application, often eliminating the need for additional fixings. Thanks to its good recoatability with common 1K and 2K systems, TEROSON MS 935 is ideally suited for visible applications.

Product features:

• 1-component SMP adhesive/sealant

• Sprayable, thixotropic and highly viscous

• Networking through humidity

• Skin formation time: 5–20 minutes

• Curing time: approx. 3 mm/24 h

• Shore A hardness: approx. 50

• Tensile strength: 2.8 MPa

• Elongation at break: approx. 230%

• Temperature resistance: -40 °C to +100 °C (up to 120 °C for short periods)

• Free from silicone, isocyanate, PVC and solvents

• Very good UV and aging resistance

• Compatible with suitable paint systems

Suitable materials:

• Metals (e.g. steel, aluminum)

• Plastics (e.g. ABS, GRP – check suitability)

• Painted surfaces

• Wood, ceramics and other solid substrates (after preliminary testing)

Typical areas of application:

• Vehicle and body construction

• Shipbuilding (e.g., boat glue boards on steel floors)

• Wagon and container construction

• Photovoltaic industry

• Air conditioning, ventilation and electrical engineering

• Metal and apparatus construction

• Sealing of seams and joints, both inside and out

Processing instructions:

1. The surface must be clean, dry and free of grease.

2. Depending on the material, mechanical roughening or a primer may be required.

3. Processing at 5–40 °C using a hand or compressed air gun (2–5 bar).

4. Temper if necessary before application (to reduce viscosity).

5. Clean uncured residues with Teroson A, D or FL.

6. Can be painted over wet-on-wet with 1K/2K systems – personal testing recommended.