)
)
PERMABOND UV649
Permabond UV649 — UV/light-activated adhesive, Shore D 50-65.
Thixotropic plastic UV gel — also usable as a sealant, highest polycarbonate strength.
Documents
Internal reference:
49-649.FL
HS code:
3506.9190000
Permabond UV649 is a thixotropic UV-curing gel for plastics — designed for vertical applications, higher layer thicknesses and dual function as a sealant, with highest polycarbonate strength.
With a pressure of 20,000–30,000 mPa·s and thixotropic behavior up to 150,000 mPa·s, UV649 does not drip and reliably fills large gaps. Its high curing depth allows for the bonding of thicker layers—UV649 can also be used as a UV-curing sealant.
Polycarbonate bonding leads to substrate failure exceeding 9 N/mm². PC/ABS blends achieve substrate failure of 7 N/mm². This makes UV649 the strongest plastic UV bond in the Permabond range.
Thixotropic UV-cured polymer gel with high curing depth — also suitable for use as a sealant. Highest polycarbonate strength (>9 N/mm² substrate failure) for vertical applications. Low flow tendency — precise application possible.
What distinguishes Permabond UV649
What is Permabond UV649 used for?
processing
Recommended accessories
Important instructions
Which Permabond UV adhesive is suitable for which application?
Permabond UV649 in direct comparison with related products of the UV series.
Permabond UV649 Current product | Permabond UV645 → | Permabond UV648 → | Permabond UV640 → | |
|---|---|---|---|---|
| Application | UV adhesive for plastics — thixotropic gel (suitable for sealants) | Lower viscosity | Urethane chemistry tough-elastic. | Low viscosity standard |
| viscosity | 20,000–30,000 mPa s @ 20 rpm / 80,000–150,000 mPa s @ 2.5 rpm (thixotropic) | 8,000–10,000 mPa·s | 20,000–40,000 mPa·s | 3,000–5,000 mPa·s |
| Substrate strength | >9 N/mm² (substrate failure) | Polycarbonat | Polycarbonat | Polycarbonat |
| Elongation at break | >70 % | >70 % | >70 % | 110 % |
Technical data for PERMABOND UV649
| Product information | |
|---|---|
| Manufacturer | Permabond Engineering Adhesives Ltd |
| brand | Permabond |
| Container | 50 ml, 250 ml, 1 l |
| Country of origin | Italy |
| UFI (Unique Formula Identifier) | F3X0-H0FG-K005-WPQT |
| Performance at final strength | |
|---|---|
| Tensile strength (ISO37) | 15 N/mm² |
| Refractive index | 1490 |
| Elongation at break (elasticity) (ISO37) | >70% |
| Dielectric strength | 25-30 KV/mm |
| Dielectric constant 1MHz at 25°C | 4 |
| Water absorption (ISO62) 2 hours in boiling water | <5% |
| Shear strength polycarbonate | >9 N/mm² |
| Shear strength PVC | >5 N/mm² |
| Shear strength PC/ABS | >7 N/mm² |
| Physical properties | |
|---|---|
| Color | colorless |
| Chemical group | Methacrylic acid esters |
| Viscosity (adhesives) | High viscosity >5000 mPas |
| Viscosity 20rpm | 20000-30000 |
| Specific gravity | 1.1 |
| Curing values | |
|---|---|
| Curing wavelength | 365 - 420 nm |
| Mechanical properties | |
|---|---|
| Hardness (Shore D) | 50-65 |
| Shear strength ISO 4587 in N/mm² | |
|---|---|
| Acrylic | >1.5 N/mm² |
| Thermal properties | |
|---|---|
| Storage temperature (°C) | 5-25 |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Documents and datasheets
Click on a document for a preview or the download icon for a direct download.
Technical Data Sheets (TDS) 3
Frequently asked questions about Permabond UV649
Practical application and design questions — answered by SILITECH.
Permabond UV649 is a methacrylic acid ester (UV-curing, long-wavelength) adhesive with a viscosity of 20,000–30,000 mPa·s @ 20 rpm / 80,000–150,000 mPa·s @ 2.5 rpm (thixotropic). This thixotropic polymer UV gel can also be used as a sealant and offers a high cure depth. The adhesive cures upon irradiation with UV light in the spectral range of 365–420 nm—curing in seconds "on demand".
Permabond UV649 cures in the spectral range of 365–420 nm. Standard mercury vapor UV lamps, LED UV lamps with a suitable wavelength, or UV light guide systems are all suitable. For LED lamps, the maximum wavelength of the LED must be matched to the curing spectrum of the adhesive—we are happy to advise you on selecting the right lamp.
The UV curing of Permabond UV649 depends on the lamp power, wavelength, and light transmittance of the components. Typical curing times range from seconds to a few minutes.
Permabond UV649 reliably bonds: Polycarbonate: >9 N/mm² (substrate failure); Acrylic: >1.5 N/mm² (SV); PVC: >5 N/mm² (SV). For thermoplastic substrates, we recommend testing compatibility before series production — release agents on injection-molded parts can impair adhesion.
Permabond UV649 is a UV adhesive for plastics — thixotropic gel (suitable for sealants) (20,000–30,000 mPa·s @ 20 rpm / 80,000–150,000 mPa·s @ 2.5 rpm (thixotropic) viscosity, >70% elongation at break). Permabond UV645 is high viscosity (8,000–10,000 mPa·s, >70% elongation at break) — lower viscosity.
When stored at 5 to 25 °C and protected from light, Permabond UV649 is stable until the printed expiration date. IMPORTANT: UV adhesives cure upon contact with light — always store the bottle in the dark and only open it briefly under UV-blocked light. Daylight-stable variants (e.g., UV675) can be used briefly under ambient light.
From the Permabond UV range, select according to substrate, viscosity, and special properties: Permabond UV649 (UV adhesive for plastics — thixotropic gel (suitable for sealant)); Permabond UV645 (high viscosity); Permabond UV648 (high viscosity urethane); Permabond UV640 (medium viscosity). For shadowed areas (where UV light does not fully reach the adhesive gap), a dual-cure variant such as Permabond UV7141 (UV + anaerobic) should be used.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Product information | |
|---|---|
| Container | 50 ml or 250 ml or 1 l |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| brand | Permabond |
| Country of origin | Italy |
| UFI (Unique Formula Identifier) | F3X0-H0FG-K005-WPQT |
| Performance at final strength | |
|---|---|
| Tensile strength (ISO37) | 15 N/mm² |
| Refractive index | 1490 |
| Elongation at break (elasticity) (ISO37) | >70% |
| Dielectric strength | 25-30 KV/mm |
| Dielectric constant 1MHz at 25°C | 4 |
| Water absorption (ISO62) 2 hours in boiling water | <5% |
| Shear strength polycarbonate | >9 N/mm² |
| Shear strength PVC | >5 N/mm² |
| Shear strength PC/ABS | >7 N/mm² |
| Physical properties | |
|---|---|
| Color | colorless |
| Chemical group | Methacrylic acid esters |
| Viscosity (adhesives) | High viscosity >5000 mPas |
| Viscosity 20rpm | 20000-30000 |
| Specific gravity | 1.1 |
| Curing values | |
|---|---|
| Curing wavelength | 365 - 420 nm |
| Mechanical properties | |
|---|---|
| Hardness (Shore D) | 50-65 |
| Shear strength ISO 4587 in N/mm² | |
|---|---|
| Acrylic | >1.5 N/mm² |
| Thermal properties | |
|---|---|
| Storage temperature (°C) | 5-25 |
| Keywords | |
|---|---|
| Keywords | |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download:
- Permabond UV649 - Technical Data Sheet FR.pdf (285 KB)
- Permabond UV649 - Fiche de Sécurité FR.pdf (478 KB)
- Permabond UV649 - Safety Data Sheet EN.pdf (474 KB)
- Permabond UV649 - Safety Data Sheet DE.pdf (479 KB)
- Permabond UV649 - Technical Data Sheet EN.pdf (322 KB)
- Permabond UV649 - Technical Data Sheet DE.pdf (308 KB)