Skip to content
Website 0 CHF
  1. All products
  2. ACHEM SG-1001S CFC-free silicone release spray
ACHEM SG-1001S CFC-free silicone release spray

ACHEM SG-1001S CFC-free silicone release spray

https://www.silitech.ch/web/image/product.template/1583/image_1920?unique=74d93b3

Universal silicone-based mold release spray for plastics processing.

Universal silicone-based mold release spray for plastics processing — highly adhesive with high release reserve for multiple demoldings, CFC-free, ideal for polyurethane and epoxy resin applications

CHF 0.00 CHF 0.00 CHF 0.00 Excluding taxes

CHF 0.00 excluding taxes

Price on request

This combination does not exist.

Add to cart Request sample
Contact us
Mold release agent , CFC-free , silicone spray , silicone release spray, release spray, mold making

 
General Terms and Conditions.

Shipping usually within 1 to 3 business days
(availability will be confirmed after ordering)

. Express logistics. Fast and reliable within Switzerland & Europe.

Shipping from Swiss warehouse within 24 hours. Batch certificate. Invoice within 30 days (B2B). Technical support.
Shipping & Delivery

Usually 1 to 3 working days

Availability will be confirmed after order receipt.

Express logistics within Switzerland & Europe.

General Terms and Conditions →

Product data

Internal reference: 41-858.SP

Internal reference: 41-858.SP

ACHEM SG-1001S CFC-free silicone release spray
ACHEM SG-1001S CFC-free silicone release spray
ACHEM · SKU 41-858.SP

ACHEM SG-1001S CFC-free silicone release spray is a universal silicone-based mold release spray for plastics processing — very adhesive with high release reserve for multiple demoldings, CFC-free, ideal for polyurethane and epoxy resin applications.

Release sprays for composite and reaction casting applications — wax- and silicone-based spray release agents for the clean demolding of polyester, epoxy, and polyurethane resins in model making, boat building, automotive body construction, and industrial applications. SG-1001S is tailored to specific industrial and workshop applications — the most important properties and areas of application can be found below.

High release reserve for multiple demoldings

ACHEM SG-1001S is a universal silicone-based mold release spray for plastics processing — highly adhesive with good sliding properties and high release reserve, allowing for easy multiple demolding. CFC-free. Suitable for difficult demolding in polyurethane and epoxy resin processing.

SG-1001S in numbers
silicone
Active ingredient
CFC-free
propellant gas
Multiple
Separation reserve
PU/EP
resin-compatible

What makes the SG-1001S stand out

Highly adhesive release layer
High release reserve even for demanding multiple demolding processes.
Universal application in plastics processing
Suitable for all separation problems in injection molding, pressing and reaction casting.
Difficult demolding
Especially suitable for polyurethane and epoxy resin processing with high requirements.
CFC-free
Environmentally friendly propellant formulation — meets standards for modern industry.
Good sliding properties
Reduces friction during demolding — protects the mold and component.
Simple spray application
Aerosol can for even, thin application by hand.

What is the SG-1001S used for?

Polyurethane injection molding
PU foam, PU reaction casting and PU elastomers with high separation requirements.
Epoxy resin processing
Separating cured epoxy resin components from molds.
Injection molded thermoplastics
Standard and engineering thermoplastics in mass production.
Reaction casting applications
Complex reaction-cast components with undercuts.
Multiple demoldings
High separation reserve allows for multiple cycles without re-spraying.
Industrial toolmaking
Complex geometries and delicate structures — fine spray mist.
Data sheets & safety data sheet
TDS and SDS in multiple languages ​​— watch or download directly.
To the documents →

processing

1
Prepare the form
The mold must be clean, grease-free, and silicone-free. Pre-seal absorbent surfaces. For new molds, multiple applications of wax are recommended to close micropores.
2
Acclimate the release agent
Bring the aerosol can to room temperature (approx. 20 °C) before use — spraying it cold will result in uneven layers.
3
Shake the aerosol can
Stir thoroughly before and during use — active ingredients must be homogeneously distributed in the propellant.
4
Spray from a distance of 20–30 cm
Apply slowly and evenly in a thin layer — all areas of the mold must be coated with the release agent.
5
Allow to air dry for 10–60 minutes
Drying time varies depending on the product — solvents must evaporate completely. For wax release sprays, optionally polish with a soft cotton cloth (caution — friction generates heat; the release film should not be polished away).
6
Re-spray as needed
Repeat the process if the release agent effect diminishes. A film of release agent will build up in the mold with repeated use — periodic cleaning with release agent remover is necessary.

Recommended accessories

TRS release spray
Silicone-free spray release agent up to +120 °C for epoxy, polyester and polyurethane resins.
View product →
Wax Release Spray G&P
Fast-drying, silicone-free wax release spray for polyester, epoxy, PMA, PU and silicone rubber.
View product →
Neukadur Wax Release Spray P6
External wax release agent for UP and EP resins — standard in composite model making.
View product →
SILISIL Vaseline release paste white
Universal release agent for PU/epoxy/polyester casts — protects the mold from aggressive resins.
View product →

SG-1001S in comparison

Direct comparison with the related SILISIL sprays — the right choice for your application.

SG-1001S
Current product		 TRS release spray →G&P Wax Release Spray →NSR Food FPS →
Active ingredient basesiliconewaxwaxWet film fluid
Silicone statusContains siliconesilicone-freesilicone-freesilicone-free
Heat stabilitysee TDS+120 °C+90 °C+200 °C
Suitable resinsPU, epoxy, thermoplasticsEpoxy, polyester, PUUP, epoxy, PMMA, PU, ​​silicone rubberPLA, PC, PE, PP
Main applicationUniversal release sprayComposite release sprayUniversal wax release sprayFood packaging
Topics & Application Areas
Key terms related to this product. Also useful for our search and filters.
Mold release agent , CFC-free , silicone spray , silicone release spray, release spray, mold making

No technical data stored as attributes.

No public documents are available.
We will gladly send you the TDS and SDS by email upon request; please submit a request.

Frequently asked questions about SG-1001S

Practical questions regarding application and compatibility — answered by SILITECH.

ACHEM SG-1001S CFC-free silicone release spray: Universal silicone-based mold release spray for plastics processing — highly adhesive with high release reserve for multiple demolding cycles, CFC-free, ideal for polyurethane and epoxy resin applications. Main applications: polyurethane injection molding, epoxy resin processing, injection molding of thermoplastics.

For polyester (UP) and epoxy resin (EP), wax-based sprays are standard (Neukadur P6, G&P wax release spray, TRS release spray) — silicone-free, they allow the component to be painted/bonded. For difficult polyurethane demolding with high requirements or multiple cycles, the silicone-containing ACHEM SG-1001S offers the highest release resistance. For each application: apply a thin, even coat, allow to flash off — often several coats of wax are necessary before the first casting with new molds.

No. Silicone sprays leave a water-repellent silicone film that prevents paints, adhesives, and coatings from adhering. Do not use on surfaces that will later be painted or covered with adhesive film—or clean thoroughly beforehand with SILISIL Silicone Remover.

Store the aerosol can below +50 °C, protect from direct sunlight, and keep away from ignition sources. Do not forcibly open or incinerate pressurized containers, even after use. Shelf life in the unopened original container is according to SDS; please note the printed expiration date.

Polyester/epoxy resin composites: Wax-based sprays — Neukadur P6 (UP/EP special), Wax Release Spray G&P (silicone-free, polishable up to +90 °C), Release Spray TRS (silicone-free up to +120 °C). Polyurethane difficulties: ACHEM SG-1001S with maximum release reserve for multiple demoldings. Food packaging: NSR Food FPS Spray with NSF M1 registration no. 155325. If unsure about material compatibility, always make a small test casting.

Your question isn't listed here

Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.

Submit a request Request a sample