TRS release spray
Wax release spray TRS 400 ml silicone-free – spray release agent for epoxy resin, polyester resin and polyurethane resin
Silicone-free spray release agent for clean demolding of epoxy, polyester and polyurethane resins — temperature resistant up to +120 °C, fine spray mist even for complex geometries
Internal reference:
41-9001.G400
TRS release spray is a silicone-free spray release agent for clean demolding of epoxy, polyester and polyurethane resins — temperature resistant up to +120 °C, fine spray mist even for complex geometries.
Release sprays for composite and reaction casting applications — wax- and silicone-based spray release agents for the clean demolding of polyester, epoxy, and polyurethane resins in model making, boatbuilding, automotive bodywork, and industrial applications. TRS release spray is tailored to specific industrial and workshop applications — the most important properties and areas of application are listed below.
TRS Release Spray is a silicone-free spray release agent for clean and reliable demolding of epoxy, polyester, and polyurethane resins. Specifically developed for smaller, quick molding jobs, it features a fine spray mist that reliably reaches even complex geometries. Coverage is approximately 13–18 m² per 400 ml can. Extends the service life of silicone molds.
What distinguishes TRS release spray
What is TRS release spray used for?
processing
Recommended accessories
TRS release spray in comparison
Direct comparison with the related SILISIL sprays — the right choice for your application.
TRS release spray Current product |
G&P Wax Release Spray → | Neukadur P6 → | SG-1001S → | |
|---|---|---|---|---|
| Active ingredient base | wax | wax | wax | silicone |
| Silicone status | silicone-free | silicone-free | silicone-free | Contains silicone |
| Heat stability | +120 °C | +90 °C | see TDS | see TDS |
| Suitable resins | Epoxy, polyester, PU | UP, epoxy, PMMA, PU, silicone rubber | UP, epoxy | PU, epoxy, thermoplastics |
| Main application | Composite release spray | Universal wax release spray | UP/EP release spray | Universal release spray |
Technical data for TRS release spray
| Product information | |
|---|---|
| Container | 400 ml |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
No public documents are available.
We will gladly send you the TDS and SDS by email upon request; please submit a request.
Frequently asked questions about TRS release spray
Practical questions regarding application and compatibility — answered by SILITECH.
TRS Release Spray: Silicone-free spray release agent for clean demolding of epoxy, polyester, and polyurethane resins — temperature resistant up to +120 °C, fine spray mist even for complex geometries. Main applications: model making, prototype construction, industry, boat building.
For polyester (UP) and epoxy resin (EP), wax-based sprays are standard (Neukadur P6, G&P wax release spray, TRS release spray) — silicone-free, they allow the component to be painted/bonded. For difficult polyurethane demolding with high requirements or multiple cycles, the silicone-containing ACHEM SG-1001S offers the highest release resistance. For each application: apply a thin, even coat, allow to flash off — often several coats of wax are necessary before the first casting with new molds.
No. Silicone sprays leave a water-repellent silicone film that prevents paints, adhesives, and coatings from adhering. Do not use on surfaces that will later be painted or covered with adhesive film—or clean thoroughly beforehand with SILISIL Silicone Remover.
Store the aerosol can below +50 °C, protect from direct sunlight, and keep away from ignition sources. Do not forcibly open or incinerate pressurized containers, even after use. Shelf life in the unopened original container is according to SDS; please note the printed expiration date.
Polyester/epoxy resin composites: Wax-based sprays — Neukadur P6 (UP/EP special), Wax Release Spray G&P (silicone-free, polishable up to +90 °C), Release Spray TRS (silicone-free up to +120 °C). Polyurethane difficulties: ACHEM SG-1001S with maximum release reserve for multiple demoldings. Food packaging: NSR Food FPS Spray with NSF M1 registration no. 155325. If unsure about material compatibility, always make a small test casting.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Container | 400 ml |
| Keywords | |
|---|---|
| Keywords | |