)
BLUESIL Fluid 47 V 1000
Linear PDMS oil.
Linear PDMS oil (1,000 mm²/s) — higher viscosity for long-life lubrication, care products and industrial protective films
Documents
HS code:
39100000
Bluesil Fluid 47 V 1000 is a linear PDMS oil (1,000 mm²/s) — higher viscosity for long-life lubrication, care products and industrial protective films.
Bluesil/Silbione polydimethylsiloxane oils (PDMS) — chemically inert, thermally stable, with defined viscosity, suitable for use as lubricants, separators, dielectrics, hydraulic fluids, and heat transfer fluids. Fluid 47 V 1000 is tailored to specific applications — the most important properties and areas of application are listed below.
Bluesil FLD 47V1'000 is the high-viscosity variant of the 47V50–47V1'000 series — thick, with a long service life as a lubricating and protective film. Proven in care products and as an RTV plasticizer.
What distinguishes Fluid 47 V 1000
What is Fluid 47 V 1000 used for?
processing
Fluid 47 V 1000 in comparison
Direct comparison with related fluid products in our range. “— " = not specified in the datasheet.
Fluid 47 V 1000 Current product |
Fluid 47 V 500 → | Fluid 47 V 5000 → | Fluid 47 V 12500 → | |
|---|---|---|---|---|
| Product type | PDMS, linear | PDMS, linear | PDMS, linear | PDMS, linear |
| Viscosity @25 °C | 1,000 mm²/s | 500 mm²/s | 5,000 mm²/s | 12,500 mm²/s |
| Density @25 °C | 0.970 | 0.970 | 0.970 | 0.970 |
| Flash point | ≥+300 °C | ≥+300 °C | ≥+300 °C | ≥+300 °C |
| Stock point | -50 °C | -50 °C | -50 °C | -50 °C |
| Refractive index | 1.403 | 1.403 | 1.403 | 1.403 |
| Main application | Care product / RTV plasticizer | Lubricants / Release agents | Antifoam / Special Lubrication | Antifoam / Damping |
Technical data for BLUESIL Fluid 47 V 1000
| Product information | |
|---|---|
| brand | Bluesil |
| Manufacturer | Elkem Silicones |
| Container | 200g, 1kg, 5kg, 25kg, 200kg, 1000kg |
| Number of components | 1K (single-component) |
| consistency | Flowable |
| Mixing ratio | Single-component |
| Other features | |
|---|---|
| UV resistance | Yes |
| Physical properties | |
|---|---|
| Paint has hardened | Transparent |
| Self-leveling | Yes |
| Viscosity (cSt) | 1000 cSt |
| Density (g/cm³) | 0.971 g/cm³ |
| Electrical properties | |
|---|---|
| Electrical insulation | Yes |
| Product approvals | |
|---|---|
| Food contact | No |
| Suitable for medical use | No |
| Thermal properties | |
|---|---|
| Flash point (°C) | >300 °C |
| Pour point (°C) | -50 °C |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Documents and datasheets
Click on a document for a preview or the download icon for a direct download.
Technical Data Sheets (TDS) 3
Frequently asked questions about Fluid 47 V 1000
Practical application and design questions — answered by SILITECH.
Bluesil Fluid 47 V 1000: Linear PDMS oil (1,000 mm²/s) — higher viscosity for long-life lubrication, care products, and industrial protective films. Main applications: Care products, long-life release agents, RTV plasticizers.
PDMS (polydimethylsiloxane) is a linear silicone fluid with high thermal stability, low surface tension, very good dielectric properties, and a wide temperature range. The viscosity (in mm²/s = cSt) determines the application range—low viscosities for volatile lubrication and hydraulics, high viscosities for antifoaming, damping, and conditioning.
Store in the unopened original container in a dry, cool place — typically between +5 and +30 °C, see TDS for exact values. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging — Elkem guarantees the product's specifications only until the date shown.
The comparison table above lists related products with similar functions or specifications. If you are unsure which product is best, we would be happy to advise you — contact SILITECH with details of your application (desired properties, substrate, processing workflow).
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Product information | |
|---|---|
| Container | 200g or 1kg or 5kg or 25kg or 200kg or 1000kg |
| brand | Bluesil |
| Manufacturer | Elkem Silicones |
| Number of components | 1K (single-component) |
| consistency | Flowable |
| Mixing ratio | Single-component |
| Other features | |
|---|---|
| UV resistance | Yes |
| Physical properties | |
|---|---|
| Paint has hardened | Transparent |
| Self-leveling | Yes |
| Viscosity (cSt) | 1000 cSt |
| Density (g/cm³) | 0.971 g/cm³ |
| Electrical properties | |
|---|---|
| Electrical insulation | Yes |
| Product approvals | |
|---|---|
| Food contact | No |
| Suitable for medical use | No |
| Thermal properties | |
|---|---|
| Flash point (°C) | >300 °C |
| Pour point (°C) | -50 °C |
| Keywords | |
|---|---|
| Keywords | |
| processing | |
|---|---|
| Viscosity of mixture | 1,000 mPa·s |
| Physical & Thermal | |
|---|---|
| Density (23°C) | 0.97 g/cm³ |
| Flash point | 300.0 °C |
| Refractive index n (20°C) | 1.403 |
| Temperature resistance (duration) | -50 to 200 °C |
| Peak temperature (short-term) | 200 °C |
| thermal conductivity | 0.16 W/(m·K) |
| Electrical characteristics | |
|---|---|
| Dielectric constant ε (1 kHz) | 2.8 |
| Dielectric strength | 16.0 kV/mm |
| Contact resistance | 1e+15 Ω·cm |
| storage | |
|---|---|
| Shelf life in original packaging | 36 months |
| Storage temperature | -20 to 50 °C |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download:
- Bluesil FLD 47V1 000 - Fiche Technique FR.pdf (483 KB)
- Bluesil FLD 47V1 000 - Fiche de Sécurité FR.pdf (376 KB)
- Bluesil FLD 47V1 000 - Scheda di Sicurezza IT.pdf (371 KB)
- Bluesil FLD 47V1 000 - Safety Data Sheet DE.pdf (181 KB)
- Bluesil FLD 47V1 000 - Technical Data Sheet EN.pdf (447 KB)
- Bluesil FLD 47V1 000 - Technical Data Sheet DE.pdf (137 KB)