)
CAF 530 White
Neutral-curing 1K silicone sealant.
Neutral-curing 1K silicone sealant (alcohol-type, white) — primer-free adhesion, odorless, no copper corrosion risk
Documents
HS code:
39100000
CAF 530 White is a neutral-curing 1K silicone sealant (alcohol-type, white) — primer-free adhesion, odorless, no copper corrosion risk.
The Elkem CAF range comprises one-component (1K), neutral (alkoxy) curing silicone sealants — no acetic acid odor, no corrosion on copper and sensitive metals, ideal for electronics and automotive applications. CAF 530 White is tailored to specific industrial applications — its key properties and areas of use are listed below.
CAF 530 cross-links through alcohol hydrolysis instead of acetic acid — no corrosion on copper and sensitive metals, odorless in the workplace, primer-free adhesion to many substrates.
What distinguishes CAF 530 White
What is CAF 530 White used for?
processing
Recommended accessories
Important instructions
CAF 530 White compared to related CAF products
Networking, mechanics, and temperature directly next to each other — all values from the official Elkem TDS. “— " = not specified in the datasheet.
CAF 530 White Current product |
CAF 530 Black → | CAF 731 → | CAF 730 MF → | |
|---|---|---|---|---|
| Networking system | 1K Neutral (Alkoxy) | 1K Neutral (Alkoxy) | 1K Neutral (Alkoxy) | 1K Neutral (Oxim) |
| Color | White | Black | White | White |
| Shore A hardness | 34 | 34 | 40 | 25 |
| Elongation at break | 450 % | 450 % | 420 % | 400 % |
| Tensile strength | 3.5 MPa | 3.5 MPa | 3.3 MPa | 1.9 MPa |
| Tear resistance | 15 kN/m | 15 kN/m | 13 kN/m | 4.0 kN/m |
| Skin formation time | 10–15 min | 10–15 min | 10 min | 7 min |
| Continuous operating temperature. | +180 °C | +180 °C | +150 °C | +200 °C |
| Peak temperature | +200 °C | +200 °C | +180 °C | +225 °C |
| Main application | Electronic bonding | Electronics with a black look | Aviation bonding | Aviation maintenance |
Technical data for CAF 530 White
| Product information | |
|---|---|
| brand | CAF |
| Networking type | Single-component (humidity) |
| Container | 310 ml, 25 kg |
| Number of components | 1K (single-component) |
| consistency | Thixotropic |
| Mixing ratio | Single-component |
| Manufacturer | Elkem Silicones |
| Other features | |
|---|---|
| UV resistance | No |
| Physical properties | |
|---|---|
| Paint has hardened | White |
| Self-leveling | No |
| Electrical properties | |
|---|---|
| Electrical insulation | Yes |
| Product approvals | |
|---|---|
| Food contact | No |
| Suitable for medical use | No |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Documents and datasheets
Click on a document for a preview or the download icon for a direct download.
Technical Data Sheets (TDS) 2
Frequently asked questions about CAF 530 White
Practical application and design questions — answered by SILITECH.
CAF 530 White: Neutral-curing 1K silicone sealant (alcohol-type, white) — primer-free adhesion, odorless, no risk of copper corrosion. Main applications include bonding electronics, headlights, and solar panels.
Neutral curing (alkoxy) means that the 1K system cures through atmospheric moisture, releasing only alcohols (instead of acetic acid). Advantages: no aggressive odor in the workplace, no corrosion on copper, non-ferrous metals, and electrogalvanized steels, very good adhesion to electronic components. Preferred choice for electronics, automotive sensors, solar modules, and all applications with corrosion-sensitive metals.
CAF 530 White adheres without primer to glass, ceramics, many metals (stainless steel, aluminum, copper in neutral variants), and numerous engineering plastics. Adhesion is not possible to PE, PP, PTFE, and silicone oils—these substrates are fundamentally incompatible with silicone. If in doubt, we recommend a preliminary test or consulting SILITECH regarding the specific material pairing.
Prepare the substrate to be clean, grease-free, and dry. Apply the sealant evenly from the cartridge or container—refer to the TDS for skin formation and curing times. Store in the unopened original container at 5 to 30 °C, protected from sunlight. Use opened containers promptly—for Acetic systems, reseal tightly immediately after opening. Consult the current Safety Data Sheet (SDS) before use.
In the comparison table above, you will find related CAF products with adapted properties—different color, different crosslinking system (acetic vs. neutral), or different mechanical properties. If you are unsure about the optimal choice, we would be happy to advise you—contact SILITECH with your requirements (substrate pairing, temperature, corrosion requirements, appearance).
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Product information | |
|---|---|
| Container | 310 ml or 25 kg |
| brand | CAF |
| Networking type | Single-component (humidity) |
| Number of components | 1K (single-component) |
| consistency | Thixotropic |
| Mixing ratio | Single-component |
| Manufacturer | Elkem Silicones |
| Other features | |
|---|---|
| UV resistance | No |
| Physical properties | |
|---|---|
| Paint has hardened | White |
| Self-leveling | No |
| Electrical properties | |
|---|---|
| Electrical insulation | Yes |
| Product approvals | |
|---|---|
| Food contact | No |
| Suitable for medical use | No |
| Keywords | |
|---|---|
| Keywords | |
| Mechanical properties | |
|---|---|
| Shore hardness A | 34.0 Shore A |
| Modulus at 100% elongation | 0.9 MPa |
| Tensile strength | 3.5 MPa |
| Elongation at break | 450.0 % |
| Tear resistance | 15.0 kN/m |
| processing | |
|---|---|
| Skin formation time | 12.0 min |
| Adhesive leisure | 40.0 min |
| Fully cured after 24 hours | 3.5 mm |
| Crosslinking 2 mm layer | 8.0 h |
| Physical & Thermal | |
|---|---|
| Density (23°C) | 1.3 g/cm³ |
| Temperature resistance (duration) | -60 to 150 °C |
| Peak temperature (short-term) | 185 °C |
| Electrical characteristics | |
|---|---|
| Dielectric constant ε (1 kHz) | 3.4 |
| Dielectric strength | 24.0 kV/mm |
| Contact resistance | 5e+13 Ω·cm |
| Loss factor tan δ | 0.006 |
| storage | |
|---|---|
| Shelf life in original packaging | 12 months |
| Storage temperature | 2 to 30 °C |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download:
- CAF 530 White - Fiche Technique FR.pdf (189 KB)
- CAF 530 White - Fiche de Sécurité FR.pdf (483 KB)
- CAF 530 White - Safety Data Sheet EN.pdf (371 KB)
- CAF 530 White - Scheda di Sicurezza IT.pdf (477 KB)
- CAF 530 White - Safety Data Sheet DE.pdf (280 KB)
- CAF 530 White - Technical Data Sheet EN.pdf (744 KB)