)
CRC SPRAY FREEZE 75 (200 g)
Fast-acting cooling spray for detecting thermal problems on electronic components.
Fast-acting cooling spray for detecting thermal problems on electronic components — immediate, targeted cooling deep below zero, helpful for troubleshooting and maintenance
Internal reference:
40-2311.SP.G200
HS code:
29035100
CRC SPRAY FREEZE 75 (200 g) is a fast-acting cooling spray for the detection of thermal problems on electronic components — immediate, localized cooling deep below zero, helpful in troubleshooting and maintenance.
Aerosol cooling sprays for detecting thermal problems on electronic components — instant, targeted cooling deep below zero degrees Celsius for identifying loose connections and cold solder joints. CRC Spray Freeze 75 is tailored to specific industrial and workshop applications — the most important features and areas of application are listed below.
CRC SPRAY FREEZE 75 is a fast-acting aerosol cooling spray for detecting thermal problems—typical applications in electronics troubleshooting, diagnosing loose connections, cold solder joints, and thermally induced component failures. Targeted cooling to well below zero degrees Celsius allows for the precise identification of defective components. 200 g aerosol can. See SDS for detailed application data.
What makes CRC Spray Freeze 75 stand out
What is CRC Spray Freeze 75 used for?
processing
Recommended accessories
Technical data for CRC SPRAY FREEZE 75 (200 g)
| Product information | |
|---|---|
| brand | CRC |
| Container | 200 ml |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
No public documents are available.
We will gladly send you the TDS and SDS by email upon request; please submit a request.
Frequently asked questions about CRC Spray Freeze 75
Practical questions regarding application and compatibility — answered by SILITECH.
CRC SPRAY FREEZE 75 (200 g): Fast-acting cooling spray for detecting thermal problems on electronic components — immediate, localized cooling deep below zero, helpful for troubleshooting and maintenance. Main applications: Electronics troubleshooting, solder joint diagnostics, service engineering.
Cooling sprays use evaporating propellant to rapidly cool the sprayed area—typically well below zero degrees Celsius. In electronics diagnostics, this allows for the targeted cooling of individual components, solder joints, or sensors. Loose connections, cold solder joints, and thermally induced component defects become apparent through changes in function upon cooling. Important safety instructions: do not spray on hot surfaces, ensure adequate ventilation—detailed instructions can be found in the SDS.
No. Silicone sprays leave a water-repellent silicone film that prevents paints, adhesives, and coatings from adhering. Do not use on surfaces that will later be painted or covered with adhesive film—or clean thoroughly beforehand with SILISIL Silicone Remover.
Store the aerosol can below +50 °C, protect from direct sunlight, and keep away from ignition sources. Do not forcibly open or incinerate pressurized containers, even after use. Shelf life in the unopened original container is according to SDS; please note the printed expiration date.
Safety: Do not spray on hot surfaces or open flames, ensure adequate ventilation, and observe ESD protection measures. Application: Spray sparingly and briefly – overdosing can lead to frost damage to sensitive components. Diagnosis: Check function immediately after spraying – defective components will show signs of malfunction upon cooling. Detailed instructions: Consult the SDS and application guide.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| brand | CRC |
| Container | 200 ml |
| Keywords | |
|---|---|
| Keywords | |