Silicones, silicone oils, sprays
Casting and potting resins)
HS Code:
3506.9190000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Manufacturer
- Permabond Engineering Adhesives Ltd
- Brand
- Permabond
- Container
- 50 ml, 200 ml, 1 kg
- Country of origin
- Italy
Cure speed (oven)
- 130° C
- 60 minutes
- 150°C
- 45 minutes
Performance at Full Cure
- Thermal conductivity
- 0.30 W/(m.K)
- Tensile strength (DIN53504)
- 40 N/mm²
- Elongation at break (elasticity) (DIN53504)
- <3%
- Water absorption (ISO62) 2 hrs in boiling water
- <0.5%
Physical Properties
- Color
- white
- Chemical group
- Epoxy resin
- Viscosity (adhesives)
- High viscosity >5000 mPas
- Viscosity mPa.s
- 15000-30000
- Specific Gravity
- 1.2
Curing values
- Maximum gap fill (mm)
- 0.25
Mechanical properties
- Hardness (Shore D)
- 80-85
Shear strength ISO 4587 in N/mm²
- Steel
- 20-35
- Aluminum
- 14-27
- Zinc
- 14-27
Thermal Properties
- Operating temperature (°C)
- -40 to +180
- Storage Temperature (°C)
- 2-7
Features
- 160
- 20 minutes
- Modulus of elasticity
- 2.1 GPa
- Cure speed (induction)
- <3 minutes
- TG Value
- 115°C
Product Description
Permabond ES562 is a single-part heat-cure epoxy — an industry standard with heat curing.
1K heat-cure for industrial applications.
Single-part heat-cure epoxy — standard industrial variant for heat-curing lines.
What sets Permabond ES562 apart
What is Permabond ES562 used for?
Processing
Recommended accessories
Important Notes
Which Permabond 1K epoxy for which application?
Permabond ES562 in direct comparison with related products from the ES series.
Permabond ES562 Current Product | Permabond ES550 → | Permabond ES558 → | Permabond ES578 → | |
|---|---|---|---|---|
| Application | 1K Heat-Cure Epoxy — Standard Industrial | Comparable | Comparable | Flame-retardant |
| Chemistry | One-component epoxy resin (heat-cure) | 1K epoxy | 1K epoxy | 1K epoxy |
| Curing | Heat curing | Heat-cure | Heat-cure | Heat-cure |
Frequently asked questions about Permabond ES562
Practical application and design questions — answered by SILITECH.
Single-part Heat-Cure 1K epoxy — industry-standard bonding. 1K epoxies are processed directly without mixing and cured in a heat-cure step.
1K epoxies are processed directly from the container without mixing — no pot life limitation, no mixing errors. Disadvantage: heat curing required (industrial oven, IR lamp, or hot air). 2K epoxies cure at room temperature but require precise mixing and have a limited pot life. 1K is suitable for line production with heat-cure infrastructure, 2K for workshops without an oven.
Heat curing. For exact conditions, refer to the Permabond TDS — typically 30 minutes at 150 °C or equivalent heat input (e.g., 60 min @ 120 °C).
1K heat-cure epoxies bond metals (steel, aluminum, copper), composites (CFK, GFK), ceramics, and selected plastics (with heat resistance). Substrates must tolerate the curing temperature (typically 150 °C).
Permabond ES562 has no specific industrial approvals such as UL94-V0 (see ES578 for the flame-retardant variant). For general industrial applications, the product is approved according to Permabond standards.
At 5 to 25 °C. 1K heat-cure epoxies have limited storage stability — reactivity decreases with higher storage temperature. For long shelf life, store refrigerated. Allow adhesive to warm to room temperature before opening.
From the Permabond 1K epoxy series: Permabond ES562 (1K heat-cure epoxy — standard industrial); Permabond ES550 (standard 1K); Permabond ES558 (standard 1K); Permabond ES578 (UL94-V0). For UL94-V0 fire protection, see ES578; for high temperature, ES566/ES569; for IR/hot-air curing (without industrial oven), ES5691.