Silicones, silicone oils, sprays
Casting and potting resins)
HS Code:
3506919000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- Permabond
- Manufacturer
- Permabond Engineering Adhesives Ltd
- Country of origin
- Italy
- Container
- 50 ml, 1 l
- Flash point
- 100°C
Performance at Full Cure
- Tensile strength (ISO37)
- 12 N/mm²
- Dielectric strength
- 4-9.5 years
- Elongation at break
- 20%
- Dielectric Strength
- 12 KV/mm
Physical Properties
- Chemical group
- Methacrylate ester
- Color
- colorless
- Specific Gravity
- 1.1
Electrical Properties
- Dielectric Constant
- 4
Mechanical properties
- Hardness (Shore D)
- 60
Shear strength ISO 4587 in N/mm²
- polycarbonate
- >9 N/mm²
Thermal Properties
- Storage Temperature (°C)
- 5-25
Product Description
Permabond 4UV80HV is a high-viscosity, UV/light-curing methacrylate adhesive of medical device quality — cure-on-demand with low-power lamps, ISO 10993-5 biocompatible.
Permabond UV/light-curing methacrylate adhesives — cure-on-demand, biocompatible, ideal for transparent substrates and automated bonding in medical device manufacturing. 4UV80HV is tailored to specific applications — the most important properties and areas of application are listed below.
Permabond 4UV80HV is a UV-curing methacrylate ester for medical devices — cure-on-demand allows free positioning until exposure. Excellent adhesion to medical-grade plastics and metals, cytotoxicity tested according to ISO 10993-5.
What makes the 4UV80HV stand out
What is the 4UV80HV used for?
Processing
Recommended accessories
4UV80HV in comparison
Direct comparison with related Permabond products from our range.
4UV80HV Current Product |
4C10 → | 4C30 → | 4C40 → | |
|---|---|---|---|---|
| Chemical Base | Methacrylate ester | Cyanoacrylate (ethyl ester) | Cyanoacrylate (ethyl ester) | Cyanoacrylate (ethyl ester) |
| Viscosity | high viscosity, opaque | low viscosity | Medium Viscosity | high viscosity |
| Grade | Medical Device (ISO 10993-5) | Medical Device | Medical Device | Medical Device |
| Color | opaque | colorless | colorless | colorless |
| Set Time | UV Cure (sec.) | <10 s (typical) | ~30 s | ~60 s |
| Full Cure | UV-cured | 24 h | 24 h | 24 h |
| Main application | UV Medical Device | Hard-to-bond rubbers | Auto-dispenser, middle column | Large gap + POM |
Frequently asked questions about 4UV80HV
Practical application and design questions — answered by SILITECH.
Permabond 4UV80HV: High-viscosity, UV/light-curing methacrylate adhesive of medical device grade — cure-on-demand with low-power lamps, ISO 10993-5 biocompatible. Main applications: Medical device assembly, transparent substrates, automated bonding.
UV-curing adhesives only crosslink under UV exposure—without UV, they remain liquid indefinitely. The advantage: components can be freely positioned and adjusted before being selectively exposed to the UV lamp. As soon as UV light hits them, the adhesive crosslinks within seconds. Ideal for high-precision bonding with long positioning times and automated machine applications.
Store in the unopened original container in a dry, cool place — Permabond adhesives typically between +5 and +25 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store cyanoacrylates cool (ideally refrigerated) for maximum shelf life.
In the comparison table above, you will find related Permabond products with different properties — viscosity, mixing ratio, special certification. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate pairing, load, curing condition).