Silicones, silicone oils, sprays
Casting and potting resins)
Internal reference:
49-4C10
HS code:
350691900
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Manufacturer
- Permabond Engineering Adhesives Ltd
- Brand
- Permabond
- Container
- 30 g, 500 g
- Country of origin
- Italy
Physical Properties
- Color
- colorless
- Chemical group
- Ethyl Cyanoacrylate
- Viscosity (adhesives)
- Low viscosity <500 MPas
- Viscosity mPa.s
- 30-50
Curing values
- Maximum gap fill (mm)
- 0.1
- Fixture time on steel (sec.)
- 10-15
- Hand Strength Rubber (sec.)
- 5-10
- Hand Strength Phenol (sec.)
- 5-10
- Final strength
- 24 hours
Mechanical properties
- Hardness (Shore D)
- 85
Shear strength ISO 4587 in N/mm²
- Steel
- 18-22
- Aluminum
- 6-8
- Zinc
- 6-8
- ABS
- >6
- PVC
- >6
- Phenol
- >6
Thermal Properties
- Storage Temperature (°C)
- 2-7
Product Description
Permabond 4C10 is a low-viscosity cyanoacrylate instant adhesive of medical device quality — specifically for hard-to-bond plastics and rubber (natural rubber, EPDM, butyl).
Permabond cyanoacrylate instant adhesives in medical device grade — biocompatible (ISO 10993), solvent-free, cross-link in seconds through surface moisture between the components. 4C10 is tailored to specific applications — the most important properties and areas of use are listed below.
Permabond 4C10 is optimized for natural rubber, EPDM, and butyl rubber—difficult-to-bond substrates for most standard cyanoacrylates. Its low viscosity allows for the tightest gaps, and its medical-grade purity makes it suitable for medical applications.
What makes 4C10 stand out
What is 4C10 used for?
Processing
Recommended accessories
4C10 in comparison
Direct comparison with related Permabond products from our range.
4C10 Current Product |
4C30 → | 4C40 → | 4UV80HV → | |
|---|---|---|---|---|
| Chemical Base | Cyanoacrylate (ethyl ester) | Cyanoacrylate (ethyl ester) | Cyanoacrylate (ethyl ester) | Methacrylate ester |
| Viscosity | low viscosity | Medium Viscosity | high viscosity | high viscosity, opaque |
| Grade | Medical Device | Medical Device | Medical Device | Medical Device (ISO 10993-5) |
| Color | colorless | colorless | colorless | opaque |
| Set Time | <10 s (typical) | ~30 s | ~60 s | UV Cure (sec.) |
| Full Cure | 24 h | 24 h | 24 h | UV-cured |
| Main application | Hard-to-bond rubbers | Auto-dispenser, middle column | Large gap + POM | UV Medical Device |
Frequently asked questions about 4C10
Practical application and design questions — answered by SILITECH.
Permabond 4C10: Low-viscosity cyanoacrylate instant adhesive of medical device grade — specially formulated for bonding difficult-to-bond plastics and rubber (natural rubber, EPDM, butyl). Main applications: Medical device assembly, natural rubber/EPDM/butyl bonding, component assembly.
Medical-Device-Grade cyanoacrylates meet elevated purity standards for medical applications — typically ISO-10993 tests (biocompatibility, cytotoxicity). They have the same instant-curing chemistry as standard CAs (cross-linking via surface moisture), but with controlled purity of ingredients for use in medical devices with patient contact or in pharmaceutical products.
Store in the unopened original container in a dry, cool place — Permabond adhesives typically between +5 and +25 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store cyanoacrylates cool (ideally refrigerated) for maximum shelf life.
In the comparison table above, you will find related Permabond products with different properties — viscosity, mixing ratio, special certification. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate pairing, load, curing condition).