)
PERMABOND 4UV80HV
High-viscosity, UV/light-curing methacrylate adhesive of medical device quality.
High-viscosity, UV/light-curing methacrylate adhesive of medical device grade — cure-on-demand with low-power lamps, ISO 10993-5 biocompatible
Documents
Internal reference:
49-480HV.FL
HS code:
3506919000
Permabond 4UV80HV is a high-viscosity, UV/light-curing methacrylate adhesive of medical device quality — cure-on-demand with low-power lamps, ISO 10993-5 biocompatible.
Permabond UV/light-curing methacrylate adhesives — cure-on-demand, biocompatible, ideal for transparent substrates and automated bonding in medical device manufacturing. 4UV80HV is tailored to specific applications — the most important properties and areas of application are listed below.
Permabond 4UV80HV is a UV-curing methacrylate ester for medical devices — cure-on-demand allows free positioning until exposure. Excellent adhesion to medical-grade plastics and metals, cytotoxicity tested according to ISO 10993-5.
What makes the 4UV80HV stand out
What is the 4UV80HV used for?
processing
Recommended accessories
4UV80HV in comparison
Direct comparison with related Permabond products in our range.
4UV80HV Current product |
4C10 → | 4C30 → | 4C40 → | |
|---|---|---|---|---|
| Chemical basis | Methacrylate esters | Cyanoacrylate (ethyl ester) | Cyanoacrylate (ethyl ester) | Cyanoacrylate (ethyl ester) |
| viscosity | highly viscous, opaque | low viscosity | medium viscosity | high viscosity |
| Grade | Medical Device (ISO 10993-5) | Medical Device | Medical Device | Medical Device |
| Color | opaque | colorless | colorless | colorless |
| SetTime | UV Cure (sec.) | <10 s (typical) | ~30 s | ~60 s |
| Full Cure | UV-exposed | 24 h | 24 h | 24 h |
| Main application | UV Medical Device | Hard-to-adhere rubbers | Auto-dispense, middle column | Large gap + POM |
Technical data for PERMABOND 4UV80HV
| Product information | |
|---|---|
| brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Country of origin | Italy |
| Container | 50 ml, 1 l |
| Flash point | 100°C |
| Performance at final strength | |
|---|---|
| Tensile strength (ISO37) | 12 N/mm² |
| Dielectric strength | 4-9.5 years |
| Elongation at break | 20% |
| Dielectric strength | 12 kV/mm |
| Physical properties | |
|---|---|
| Chemical group | Methacrylate esters |
| Color | colorless |
| Specific gravity | 1.1 |
| Electrical properties | |
|---|---|
| dielectric constant | 4 |
| Mechanical properties | |
|---|---|
| Hardness (Shore D) | 60 |
| Shear strength ISO 4587 in N/mm² | |
|---|---|
| polycarbonate | >9 N/mm² |
| Thermal properties | |
|---|---|
| Storage temperature (°C) | 5-25 |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Documents and datasheets
Click on a document for a preview or the download icon for a direct download.
Frequently asked questions about 4UV80HV
Practical application and design questions — answered by SILITECH.
Permabond 4UV80HV: High-viscosity, UV/light-curing methacrylate adhesive of medical device grade — cure-on-demand with low-power lamps, ISO 10993-5 biocompatible. Main applications: Medical device assembly, transparent substrates, automated bonding.
UV-curing adhesives only crosslink under UV exposure—without UV, they remain liquid indefinitely. The advantage: components can be freely positioned and adjusted before being selectively exposed to the UV lamp. As soon as UV light hits them, the adhesive crosslinks within seconds. Ideal for high-precision bonding with long positioning times and automated machine applications.
Store in the unopened original container in a dry, cool place — Permabond adhesives typically between +5 and +25 °C, see TDS for exact values. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store cyanoacrylates in a cool place (ideally refrigerated) for maximum shelf life.
The comparison table above lists related Permabond products with different properties—viscosity, mixing ratio, special certification. If you are unsure which product is best, we would be happy to advise you—contact SILITECH with your specific application (substrate pairing, load, curing conditions).
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Product information | |
|---|---|
| Container | 50 ml or 1 l |
| brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Country of origin | Italy |
| Flash point | 100°C |
| Performance at final strength | |
|---|---|
| Tensile strength (ISO37) | 12 N/mm² |
| Dielectric strength | 4-9.5 years |
| Elongation at break | 20% |
| Dielectric strength | 12 kV/mm |
| Physical properties | |
|---|---|
| Chemical group | Methacrylate esters |
| Color | colorless |
| Specific gravity | 1.1 |
| Electrical properties | |
|---|---|
| dielectric constant | 4 |
| Mechanical properties | |
|---|---|
| Hardness (Shore D) | 60 |
| Shear strength ISO 4587 in N/mm² | |
|---|---|
| polycarbonate | >9 N/mm² |
| Thermal properties | |
|---|---|
| Storage temperature (°C) | 5-25 |
| Keywords | |
|---|---|
| Keywords | |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download: