Silicones, silicone oils, sprays
Casting and potting resins)
Internal reference:
49-229.FL.L001
HS code:
38140090
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- Permabond
- Container
- 1 l
- Manufacturer
- Permabond Engineering Adhesives Ltd
- Flash point
- -4°C
Physical Properties
- Color
- colorless
- Viscosity mPa.s
- 0.7
- Specific Gravity
- 0.7
- Boiling point
- 45-100°C
- Evaporation rate
- 4.3
Thermal Properties
- Storage Temperature (°C)
- 5-25
Product Description
Permabond Activator CSA (1 L) is a cyanoacrylate activator (1 liter, liquid) — accelerates the curing of Permabond CA adhesives, expands the gap-filling capacity, activates difficult or porous surfaces.
Permabond C Surface Activator (CSA) — Activator for cyanoacrylate adhesives; accelerates curing and improves gap-filling capacity, even on difficult or porous substrates. Activator CSA (1 L) is tailored to specific applications — the most important properties and areas of use are listed below.
Permabond C Surface Activator (CSA) is used in conjunction with Permabond cyanoacrylates to achieve faster curing and improved gap-filling properties. The 1-liter industrial container is economical for high-volume production.
What distinguishes Activator CSA (1 L)
What is activator CSA (1 L) used for?
Processing
Recommended accessories
CSA Activator (1 L) in comparison
Direct comparison with related Permabond products from our range.
CSA Activator (1 L) Current Product |
CSA Aerosol → | CSA NEW (NF) → | POP Primer → | |
|---|---|---|---|---|
| Chemical Base | CA Activator (solvent-based) | CA activator (aerosol) | CA Activator (Non-Flame) | Polyolefin primer |
| Viscosity | Liquid | Spray | Liquid | Liquid |
| Grade | Industrial | Industrial | Industrial | Industrial |
| Color | see TDS | see TDS | see TDS | see TDS |
| Set Time | evaporates | evaporates | evaporates | evaporates |
| Full Cure | in CA reaction | in CA reaction | in CA reaction | in CA reaction |
| Main application | CA Activation Industry | CA Activation Spray | Secure CA activator | PP/PE/PTFE/Silicone CA Bonding |
Frequently asked questions about activator CSA (1 L)
Practical application and design questions — answered by SILITECH.
Permabond Activator CSA (1 L): Cyanoacrylate activator (1 liter, liquid) — accelerates the curing of Permabond CA adhesives, enhances gap-filling capacity, and activates difficult or porous surfaces. Main applications: Accelerating CA curing, difficult substrates (acidic/porous), large-gap CA bonding.
CSA activator (C Surface Activator) is applied to substrates prior to cyanoacrylate application if they are: 1) acidic or porous (wood, cardboard, some plastics—delay or prevent CA curing), 2) require large gap widths (CSA increases the gap-filling capacity of CA), 3) require very fast curing (high-throughput production). CSA is brushed or sprayed on, allowed to evaporate briefly, and then CA is applied.
Store in the unopened original container in a dry, cool place — Permabond adhesives typically between +5 and +25 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store cyanoacrylates cool (ideally refrigerated) for maximum shelf life.
In the comparison table above, you will find related Permabond products with different properties — viscosity, mixing ratio, special certification. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate pairing, load, curing condition).