)
PERMABOND MM 115 blue (250 ml)
Medium-strength threadlocker for industrial and mechanical engineering applications.
Medium-strength threadlocker (MIL-S-46163A Type II) for industrial and mechanical engineering — prevents vibration loosening, removable with standard tools
Documents
Internal reference:
49-194.FL.ML250
Permabond MM 115 blue is a medium-strength threadlocker (MIL-S-46163A Type II) for industrial and mechanical engineering applications — prevents vibration loosening, removable with standard tools.
Permabond threadlocking lacquers (anaerobic) prevent loosening caused by vibration and impact, with controlled release torque for maintenance and service. MM 115 blue is tailored to specific applications—the most important properties and areas of application are listed below.
Permabond MM 115 blue is a MIL-S-46163A Type II certified medium-strength threadlocker — prevents vibration loosening, with controlled loosening torque for maintenance and service. Typical blue color as an industry standard.
What makes MM 115 blue stand out
What is MM 115 blue used for?
Processing
Recommended accessories
MM 115 blue in comparison
Direct comparison with related Permabond products from our range.
MM 115 blue Current Product |
MM 115 Pure → | F 201 → | F 201 HV → | |
|---|---|---|---|---|
| Chemical Base | Anaerobic Methacrylate | Anaerobic Methacrylate | Anaerobic (Methacrylate) | Anaerobic (Methacrylate) |
| Viscosity | thixotropic | thixotropic | see TDS | high viscosity |
| Grade | MIL-S-46163A Type II | NSF/ANSI 61 | Industrial / Drinking water | Industrial / H₂ / Gas |
| Color | blue | colorless | see TDS | see TDS |
| Set Time | see TDS | see TDS | see TDS | see TDS |
| Full Cure | 24 h | 24 h | 24 h | 24 h |
| Main application | Industrial Threadlocker | Drinking Water Threadlocking | Potable Water + High Strength | H₂ + Gas + Potable Water |
Technical data for PERMABOND MM 115 blue (250 ml)
| Product Information | |
|---|---|
| Brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Container | 250 ml |
| UFI (Unique Formula Identifier) | P911-8005-W00G-DA96 |
| Thermal Properties | |
|---|---|
| Storage Temperature (°C) | 5-25 |
Please refer to the technical data sheet (TDS) in the "Documents" tab for binding values.
Frequently asked questions about MM 115 blue
Practical application and design questions — answered by SILITECH.
Permabond MM 115 blue: Medium-strength threadlocker (MIL-S-46163A Type II) for industrial and mechanical engineering — prevents vibration loosening, removable with standard tools. Main applications: Industrial threadlocking, vibration-stressed components, maintenance/service-friendly connections.
Threadlocking compounds are available in three strength classes: low strength (can be removed by hand), medium strength (can be removed with standard tools—e.g., MM 115 blue), and high strength (can only be removed with heat or special tools). Medium strength is the most common choice for maintenance/service applications—it prevents loosening due to vibration but can be removed again if necessary.
Store in the unopened original container in a dry, cool place — Permabond adhesives typically between +5 and +25 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store cyanoacrylates cool (ideally refrigerated) for maximum shelf life.
In the comparison table above, you will find related Permabond products with different properties — viscosity, mixing ratio, special certification. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate pairing, load, curing condition).
Your question not covered?
Our technical team provides personal advice on material selection, processing questions, and individual requirements. Fast and competent.
Product Specifications
| Product Information | |
|---|---|
| Brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Container | 250 ml |
| UFI (Unique Formula Identifier) | P911-8005-W00G-DA96 |
| Thermal Properties | |
|---|---|
| Storage Temperature (°C) | 5-25 |
| Keywords | |
|---|---|
| Keywords | |
Documents and data sheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) for download: