Silicones, silicone oils, sprays
Casting and potting resins)
HS Code:
3506.9190000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- Permabond
- Manufacturer
- Permabond Engineering Adhesives Ltd
- Container
- 50 ml, 200 ml
- UFI (Unique Formula Identifier)
- FTK0-S0MU-T00S-HQT2
Product Description
Permabond F 201 is an anaerobically curing industrial adhesive with high peel and impact strength for metallic bonds — WRAS approved for direct drinking water contact.
Permabond anaerobically curing adhesives — crosslink in the absence of air between metal surfaces, ideal for thread locking, bushings, shaft-hub connections, and drinking water applications. F 201 is tailored to specific applications — the most important properties and areas of use are listed below.
Permabond F 201 is a reinforced, high-strength anaerobic adhesive—specifically for bonding metals (aluminum, copper alloys) and small components with tight fits. WRAS approved for direct contact with drinking water, with excellent long-term strength.
What distinguishes the F-201
What is F 201 used for?
Processing
Recommended accessories
F 201 in comparison
Direct comparison with related Permabond products from our range.
F 201 Current Product |
F 201 HV → | MM 115 Pure → | MM 115 blue → | |
|---|---|---|---|---|
| Chemical Base | Anaerobic (Methacrylate) | Anaerobic (Methacrylate) | Anaerobic Methacrylate | Anaerobic Methacrylate |
| Viscosity | see TDS | high viscosity | thixotropic | thixotropic |
| Grade | Industrial / Drinking water | Industrial / H₂ / Gas | NSF/ANSI 61 | MIL-S-46163A Type II |
| Color | see TDS | see TDS | colorless | blue |
| Set Time | see TDS | see TDS | see TDS | see TDS |
| Full Cure | 24 h | 24 h | 24 h | 24 h |
| Main application | Potable Water + High Strength | H₂ + Gas + Potable Water | Drinking Water Threadlocking | Industrial Threadlocker |
Frequently asked questions about F 201
Practical application and design questions — answered by SILITECH.
Permabond F 201: Anaerobically curing industrial adhesive with high peel and impact strength for metallic bonding — WRAS-approved for direct drinking water contact. Main applications: Drinking water systems, small metallic fits, aluminum and copper alloys.
Anaerobic adhesives crosslink in the absence of air between active metal surfaces. As long as the adhesive has contact with oxygen (open bottle, thin layer in air), it remains liquid. When enclosed between two metal surfaces, crosslinking begins within minutes. Ideal for thread locking, bushings, shaft-hub connections — wherever metal is bonded to metal with a tight gap.
Store in the unopened original container in a dry, cool place — Permabond adhesives typically between +5 and +25 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store cyanoacrylates cool (ideally refrigerated) for maximum shelf life.
In the comparison table above, you will find related Permabond products with different properties — viscosity, mixing ratio, special certification. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate pairing, load, curing condition).