Silicones, silicone oils, sprays
Casting and potting resins
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- Permabond
- Manufacturer
- Permabond Engineering Adhesives Ltd
- Container
- 250 ml
- UFI (Unique Formula Identifier)
- JC01-P0DT-J001-3JVG
Thermal Properties
- Storage Temperature (°C)
- 2-7
Product Description
Permabond MM 115 Pure is an nSF/ANSI 61 certified thread-locking lacquer for drinking water systems — medium strength, lubricates the thread for easy assembly and disassembly.
Permabond threadlocking lacquers (anaerobic) prevent loosening caused by vibration and impact, with controlled release torque for maintenance and service. MM 115 Pure is tailored to specific applications—the most important properties and areas of use are listed below.
Permabond MM 115 Pure is an NSF/ANSI 61-certified threadlocker for drinking water systems — medium strength with controlled loosening torque, allowing disassembly with standard tools. Corrosion-inhibiting, thixotropic, 100% solids.
What makes MM 115 Pure stand out
What is the MM 115 Pure used for?
Processing
Recommended accessories
MM 115 Pure in comparison
Direct comparison with related Permabond products from our range.
MM 115 Pure Current Product |
MM 115 blue → | F 201 → | F 201 HV → | |
|---|---|---|---|---|
| Chemical Base | Anaerobic Methacrylate | Anaerobic Methacrylate | Anaerobic (Methacrylate) | Anaerobic (Methacrylate) |
| Viscosity | thixotropic | thixotropic | see TDS | high viscosity |
| Grade | NSF/ANSI 61 | MIL-S-46163A Type II | Industrial / Drinking water | Industrial / H₂ / Gas |
| Color | colorless | blue | see TDS | see TDS |
| Set Time | see TDS | see TDS | see TDS | see TDS |
| Full Cure | 24 h | 24 h | 24 h | 24 h |
| Main application | Drinking Water Threadlocking | Industrial Threadlocker | Potable Water + High Strength | H₂ + Gas + Potable Water |
Frequently asked questions about MM 115 Pure
Practical application and design questions — answered by SILITECH.
Permabond MM 115 Pure: NSF/ANSI 61 certified threadlocker for drinking water systems — medium strength, lubricates the threads for easy assembly and disassembly. Main applications: Drinking water systems, plumbing industry, general threadlocking.
Threadlocking compounds are available in three strength classes: low strength (can be removed by hand), medium strength (can be removed with standard tools—e.g., MM 115 blue), and high strength (can only be removed with heat or special tools). Medium strength is the most common choice for maintenance/service applications—it prevents loosening due to vibration but can be removed again if necessary.
Store in the unopened original container in a dry, cool place — Permabond adhesives typically between +5 and +25 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store cyanoacrylates cool (ideally refrigerated) for maximum shelf life.
In the comparison table above, you will find related Permabond products with different properties — viscosity, mixing ratio, special certification. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate pairing, load, curing condition).