)
)
PERMABOND TA 4611
Permabond TA 4611 — tough-hard modified methacrylate adhesive, viscosity 18000 mPa·s.
Toughened acrylic structural adhesive for standard industrial applications.
Documents
Internal reference:
49-4611.KT
HS code:
35061000
Permabond TA4611 is a toughened acrylic structural adhesive for industrial applications.
Standard toughened acrylic for industrial structural bonding with a balanced profile.
Toughened acrylic structural adhesive for standard industrial applications — impact and peel resistant MMA chemistry.
What distinguishes Permabond TA 4611
What is Permabond TA 4611 used for?
processing
Recommended accessories
Important instructions
Which Permabond MMA structural adhesive is suitable for which application?
Permabond TA 4611 in direct comparison with related products of the TA series.
Permabond TA 4611 Current product | Permabond TA4522 → | Permabond TA 4550 → | Permabond TA452 → | |
|---|---|---|---|---|
| Application | Toughened Acrylic — structural adhesive | Comparable | Higher strength | Maximum toughened strength |
| Mixing ratio | — | — | — | — |
| Handling strength | — | — | — | — |
| Steel shear strength | — | 21–23 N/mm² | 27–30 N/mm² | 28–32 N/mm² |
| peeling resistance | — | — | — | — |
Technical data for PERMABOND TA 4611
| Product information | |
|---|---|
| brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Container | 50 ml, 400 ml |
| Mixing ratio | 1:1 |
| Processing time (pot life) at 25°C | 4-6 minutes |
| Country of origin | Italy |
| Physical properties A | |
|---|---|
| Chemical group (A) | Methacrylate |
| Color (A) | Translucent |
| Viscosity (A) | 20000-30000 |
| Specific gravity (A) | 1.0 |
| UFI Part A | UTG0-20FY-300F-DSDT |
| Physical properties B | |
|---|---|
| Chemical group (B) | Methacrylate |
| Color (B) | Transparent |
| Viscosity (B) | 10000-15000 |
| Specific gravity (B) | 1.0 |
| UFI Part B | JWG0-K05C-D00Y-13YV |
| Properties of the adhesive | |
|---|---|
| Maximum gap filling capacity up to | 0.5mm |
| Handling strength at 23°C | 40-50 minutes |
| Functional strength | 6-8 hours |
| Final strength at 23°C | 24-36 hours |
| Physical properties | |
|---|---|
| Color | Transparent pale yellow |
| Viscosity mPa·s | 18000 |
| Curing values | |
|---|---|
| Fixing time | 10-16 minutes |
| Shear strength ISO 4587 in N/mm² | |
|---|---|
| Polypropylen | >8 N/mm² |
| Polyethylen | >7 N/mm² |
| HDPE | 8 N/mm² |
| PTFE | >2 N/mm² |
| Steel | 11 N/mm² |
| Steel to PTFE | >2 N/mm² |
| Steel to PP | 8 N/mm² |
| Steel to HDPE | 8 N/mm² |
| Stainless steel | 9 N/mm² |
| Stainless steel to PP | 8 N/mm² |
| Stainless steel to HDPE | 6 N/mm² |
| Aluminum to PP | 8 N/mm² |
| Aluminum to HDPE | 8 N/mm² |
| Epoxy FRP | 13 N/mm² |
| Polyester-GRP | 10 N/mm² |
| Thermal properties | |
|---|---|
| Storage temperature (°C) | 5-25 |
| Operating temperature (°C) | -55 to 100 |
| Generally | |
|---|---|
| Carbon | 14 N/mm² |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Documents and datasheets
Click on a document for a preview or the download icon for a direct download.
Technical Data Sheets (TDS) 3
Frequently asked questions about Permabond TA 4611
Practical application and design questions — answered by SILITECH.
Toughened acrylic structural adhesive for industrial applications.
TA series MMA structural adhesives typically operate using a no-mix process: initiator on one surface, adhesive on the other – upon joining, the initiator activates the adhesive. Mixing ratio: —. Handling strength after 2–10 minutes, final strength after 24 hours at 23 °C.
MMA (methyl methacrylate) structural adhesives offer higher impact and peel strength than conventional two-component epoxies—important for dynamically stressed bonds. The no-mix application with a separate initiator eliminates pot life limitations. Curing time is typically faster (minutes instead of hours).
Permabond TA 4611 typically bonds metals (steel, aluminum), composites (CFRP, GFRP) and plastics. See TDS for detailed specifications.
Permabond TA 4611 does not have specific aerospace approvals like TA4246 (Boeing/Airbus). For industrial applications without aerospace requirements, the product is approved according to Permabond standards.
Permabond TA 4611 is a toughened acrylic structural adhesive (mixed). Permabond TA4522 is a standard toughened adhesive (comparable).
From the Permabond MMA range: Permabond TA 4611 (Toughened Acrylic – Structural Adhesive); Permabond TA4522 (Standard Toughened); Permabond TA 4550 (High Strength); Permabond TA452 (Premium). For Aerospace Premium, see TA4246 (Boeing and Airbus approved). For highest industrial strength without the aerospace surcharge, see TA452.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Product information | |
|---|---|
| Container | 50 ml or 400 ml |
| brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Mixing ratio | 1:1 |
| Processing time (pot life) at 25°C | 4-6 minutes |
| Country of origin | Italy |
| Physical properties A | |
|---|---|
| Chemical group (A) | Methacrylate |
| Color (A) | Translucent |
| Viscosity (A) | 20000-30000 |
| Specific gravity (A) | 1.0 |
| UFI Part A | UTG0-20FY-300F-DSDT |
| Physical properties B | |
|---|---|
| Chemical group (B) | Methacrylate |
| Color (B) | Transparent |
| Viscosity (B) | 10000-15000 |
| Specific gravity (B) | 1.0 |
| UFI Part B | JWG0-K05C-D00Y-13YV |
| Properties of the adhesive | |
|---|---|
| Maximum gap filling capacity up to | 0.5mm |
| Handling strength at 23°C | 40-50 minutes |
| Functional strength | 6-8 hours |
| Final strength at 23°C | 24-36 hours |
| Physical properties | |
|---|---|
| Color | Transparent pale yellow |
| Viscosity mPa·s | 18000 |
| Curing values | |
|---|---|
| Fixing time | 10-16 minutes |
| Shear strength ISO 4587 in N/mm² | |
|---|---|
| Polypropylen | >8 N/mm² |
| Polyethylen | >7 N/mm² |
| HDPE | 8 N/mm² |
| PTFE | >2 N/mm² |
| Steel | 11 N/mm² |
| Steel to PTFE | >2 N/mm² |
| Steel to PP | 8 N/mm² |
| Steel to HDPE | 8 N/mm² |
| Stainless steel | 9 N/mm² |
| Stainless steel to PP | 8 N/mm² |
| Stainless steel to HDPE | 6 N/mm² |
| Aluminum to PP | 8 N/mm² |
| Aluminum to HDPE | 8 N/mm² |
| Epoxy FRP | 13 N/mm² |
| Polyester-GRP | 10 N/mm² |
| Thermal properties | |
|---|---|
| Storage temperature (°C) | 5-25 |
| Operating temperature (°C) | -55 to 100 |
| Uncategorized | |
|---|---|
| Carbon | 14 N/mm² |
| Keywords | |
|---|---|
| Keywords | |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download:
- Permabond TA 4611 - Fiche Technique FR.pdf (295 KB)
- Permabond TA 4611 - Fiche de Sécurité FR.pdf (364 KB)
- Permabond TA 4611 - Safety Data Sheet EN.pdf (360 KB)
- Permabond TA 4611 - Safety Data Sheet DE.pdf (364 KB)
- Permabond TA 4611 - Technical Data Sheet EN.pdf (319 KB)
- Permabond TA 4611 - Technical Data Sheet DE.pdf (320 KB)