PERMABOND TA435 + Initiator 41
MMA structural adhesive TA435 with initiator (complete package)
Complete package TA435 with initiator 41 — industrial structural adhesive ready for immediate use.
Documents
Internal reference:
49-435.PG
The complete package TA435 + Initiator 41 contains the toughened acrylic industrial adhesive together with the required initiator — ready for immediate use in standard structural bonding applications.
TA435 is a no-mix MMA structural adhesive with Permabond Initiator 41 as an activator. The complete package simplifies procurement and warehousing.
Permabond TA435 + Initiator 41 as a complete package — the toughened acrylic industrial adhesive together with the required initiator. Ready for immediate use without separate procurement.
What distinguishes Permabond TA435 + Initiator 41
What is Permabond TA435 + Initiator 41 used for?
processing
Recommended accessories
Important instructions
Which Permabond MMA structural adhesive is suitable for which application?
Permabond TA435 + Initiator 41 in direct comparison with related products of the TA series.
Permabond TA435 + Initiator 41 Current product | Permabond TA437 + Initiator 41 → | Permabond TA 4246 + Initiator 46 → | Permabond TA436 → | |
|---|---|---|---|---|
| Application | Toughened Acrylic Complete Package — TA435 + Initiator 41 | Lower strength | Boeing/Airbus Premium | Without an initiator |
| Mixing ratio | — | — | 10:1 | — |
| Handling strength | — | — | — | — |
| Steel shear strength | 15–25 N/mm² | 14–20 N/mm² | 33–35 N/mm² | 15–25 N/mm² |
| peeling resistance | — | — | 150–180 N/25 mm | — |
Technical data for PERMABOND TA435 + Initiator 41
| Product information | |
|---|---|
| brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Container | 2 x 65 ml + 1 x 20 ml |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Documents and datasheets
Click on a document for a preview or the download icon for a direct download.
Technical Data Sheets (TDS) 3
Frequently asked questions about Permabond TA435 + Initiator 41
Practical application and design questions — answered by SILITECH.
Toughened Acrylic Complete Package TA435 + Initiator 41 — ready for immediate use.
TA series MMA structural adhesives typically operate using a no-mix process: initiator on one surface, adhesive on the other – upon joining, the initiator activates the adhesive. Mixing ratio: —. Handling strength after 2–10 minutes, final strength after 24 hours at 23 °C.
MMA (methyl methacrylate) structural adhesives offer higher impact and peel strength than conventional two-component epoxies—important for dynamically stressed bonds. The no-mix application with a separate initiator eliminates pot life limitations. Curing time is typically faster (minutes instead of hours).
Permabond TA435 + Initiator 41 bonds reliably: Steel: 15–25 N/mm². Substrate failure is common with polycarbonate and PVC (bond stronger than material).
Permabond TA435 + Initiator 41 does not have specific aerospace approvals like TA4246 (Boeing/Airbus). For industrial applications without aerospace requirements, the product is approved according to Permabond standards.
Permabond TA435 + Initiator 41 is a toughened acrylic complete package — TA435 + Initiator 41 (— Mix). Permabond TA437 + Initiator 41 is a complete package (—) — Lower strength.
From the Permabond MMA range: Permabond TA435 + Initiator 41 (Toughened Acrylic Complete Package — TA435 + Initiator 41); Permabond TA437 + Initiator 41 (Complete Package); Permabond TA4246 + Initiator 46 (Aerospace Package); Permabond TA436 (Adhesive only). For Aerospace Premium, see TA4246 (Boeing and Airbus approved). For highest industrial strength without an aerospace surcharge, see TA452.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Container | 2 x 65 ml + 1 x 20 ml |
| Keywords | |
|---|---|
| Keywords | |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download:
- Permabond TA435 + Initiator 41 - Technical Data Sheet FR.pdf (362 KB)
- Permabond TA435 + Initiator 41 - Fiche de Sécurité FR.pdf (443 KB)
- Permabond TA435 + Initiator 41 - Safety Data Sheet EN.pdf (440 KB)
- Permabond TA435 + Initiator 41 - Safety Data Sheet DE.pdf (444 KB)
- Permabond TA435 + Initiator 41 - Technical Data Sheet EN.pdf (258 KB)
- Permabond TA435 + Initiator 41 - Technical Data Sheet DE.pdf (390 KB)