Silicones, silicone oils, sprays
Casting and potting resins
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- Bonderite
- Container
- 300 ml
- Technology
- Lubricant
- Product type
- PTFE dispersion in aerosol
- Application
- Dry lubricant
- Carrier
- transparent solvents
- Flash point
- 4 °C
- UFI (Unique Formula Identifier)
- WR41-RX70-S20E-5X3T
Physical Properties
- Color
- transparent
Features
- Lubricant
- PTFE
- Binder
- Thermoplastic
- Packaging
- Aerosol spray
- Coefficient of friction (static)
- 0.06 to 0.08
- Maximum service temperature: continuous
- 80 °C
- Maximum service temperature: intermittent
- 115 °C
- Recommended film thickness
- 5 to 15 μm
Product Description
Bonderite L-GP 323 is a PTFE dispersion in aerosol (EMRALON 323 / Gleitdag) — a fast-drying dry lubricant for wood, metal, rubber, plastic, and glass substrates, curing at room temperature, transparent coating.
Bonderite L-GP dry-film lubricants from Henkel/Acheson — graphite, PTFE, MoS₂, or boron nitride dispersions that form a firmly adhering film with a low coefficient of friction and release properties after drying. L-GP 323 is tailored to specific industrial applications — the key properties and areas of use are listed below.
Bonderite L-GP 323 (formerly EMRALON 323 Gleitdag) is a fast-drying, resin-bonded PTFE-based dry lubricant in aerosol form for coating wood, metal, rubber, plastic, and glass substrates. Specifically developed for low-friction, recurring loads — moving parts wear more slowly and withstand loads better.
What sets L-GP 323 apart
What is L-GP 323 used for?
Processing
Recommended accessories
L-GP 323 in Comparison
Direct comparison with related Bonderite products from our range.
L-GP 323 Current Product |
L-GP 325EF → | L-GP 318 → | L-GP 333-1 EU → | |
|---|---|---|---|---|
| Technology | PTFE Aerosol Dispersion | PTFE solvent concentrate | Water-based PTFE dispersion | Fluorocarbon lubricant in solvent |
| Base material | PTFE + Thermoplastic | PTFE + Thermoplastic | Polytetrafluoroethylene + thermoplastic | Fluorocarbon mixture |
| Carrier | Aerosol | Solvent | Water | Organic solvents |
| Application | Dry film lubrication | Dry film lubrication | Dry film lubrication | Dry film lubrication |
| Temperature range | RT-Cure | RT-Cure | +70/+90 °C | 150 °C Cure |
| Main application | Aerosol PTFE | PTFE concentrate | PTFE water system | Low coefficient of friction |
Frequently Asked Questions about L-GP 323
Practical application and design questions — answered by SILITECH.
Bonderite L-GP 323: PTFE dispersion in aerosol (EMRALON 323 / Gleitdag) — fast-drying dry lubricant for wood, metal, rubber, plastic, and glass substrates, curing at room temperature, transparent coating. Main applications: moving parts (wood, metal, fabric), coin switch devices, door and window guides.
After evaporation of the carrier (water, solvent, or MIBK), dry film lubricants form a firmly adhering lubricating film of solid lubricant (graphite, MoS₂, PTFE, or boron nitride). Advantages over liquid lubricants: no migration, lifelong lubrication in many applications, high-temperature suitability, substrate versatility (wood, metal, plastic, glass), electrically conductive possible (graphite) or highly insulating (boron nitride).
Store in the unopened original container in a dry, cool place — typically between +5 and +40 °C, exact values see TDS. Protect water-based products from frost. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store aerosol sprays at low temperature and in a well-ventilated area.
In the comparison table above, you will find related Bonderite products with different properties — different carrier, different solid lubricant, different temperature range, or different application specialization. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate, temperature, load, processing workflow).