Silicones, silicone oils, sprays
Casting and potting resins
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- Bonderite
- Manufacturer
- Henkel
- Container
- 1 kg
- Technology
- Lubricant
- Product type
- Solvent-based PTFE dispersion
- Application
- Dry film lubricant
- Flash point
- 61 °C
- UFI (Unique Formula Identifier)
- H1FW-JW2N-K208-EUKM
Physical Properties
- Solid content
- 28 %
- Viscosity mPa.s
- 1000
- Density
- 1.07
- Color
- black
Features
- Binder
- Curable organic resin
- Coefficient of friction (static)
- 0.06 to 0.08
- Maximum service temperature: continuous
- 240 to 250°C;
- Maximum service temperature: intermittent
- 275°C
Product Description
Bonderite L-GP 333-1 EU Acheson is a special solvent-based fluorocarbon lubricant — low coefficient of friction (0.08 static / 0.06 kinetic), longer service life than pure PTFE, excellent chemical resistance, low-temperature curing.
Bonderite L-GP dry film lubricants from Henkel/Acheson — graphite, PTFE, MoS₂, or boron nitride dispersions that, after drying, form a tightly adhering film with a low coefficient of friction and release properties. L-GP 333-1 EU is tailored to specific industrial applications — the most important properties and areas of application are listed below.
Bonderite L-GP 333-1 EU is a unique blend of fluorocarbon lubricants in a special resin binder and solvent — low coefficient of friction (0.08 static, 0.06 kinetic), longer wear life than pure PTFE, and superior chemical resistance. One-component system, no mixing required, thin film 10–30 μm, lower curing temperature than PTFE.
What distinguishes L-GP 333-1 EU
What is the L-GP 333-1 EU used for?
Processing
Recommended accessories
L-GP 333-1 EU in comparison
Direct comparison with related Bonderite products from our range.
L-GP 333-1 EU Current Product |
L-GP 325EF → | L-GP 323 → | L-GP 318 → | |
|---|---|---|---|---|
| Technology | Fluorocarbon lubricant in solvent | PTFE solvent concentrate | PTFE Aerosol Dispersion | Water-based PTFE dispersion |
| Base material | Fluorocarbon mixture | PTFE + Thermoplastic | PTFE + Thermoplastic | Polytetrafluoroethylene + thermoplastic |
| Carrier | Organic solvents | Solvent | Aerosol | Water |
| Application | Dry film lubrication | Dry film lubrication | Dry film lubrication | Dry film lubrication |
| Temperature range | 150 °C Cure | RT-Cure | RT-Cure | +70/+90 °C |
| Main application | Low coefficient of friction | PTFE concentrate | Aerosol PTFE | PTFE water system |
Frequently asked questions about L-GP 333-1 EU
Practical application and design questions — answered by SILITECH.
Bonderite L-GP 333-1 EU Acheson: Special fluorocarbon lubricant in solvent — low coefficient of friction (0.08 static / 0.06 kinetic), longer service life than pure PTFE, excellent chemical resistance, low-temperature curing. Main applications: Enclosed automotive assemblies, outboard motor propellers, lock assemblies.
After evaporation of the carrier (water, solvent, or MIBK), dry film lubricants form a firmly adhering lubricating film of solid lubricant (graphite, MoS₂, PTFE, or boron nitride). Advantages over liquid lubricants: no migration, lifelong lubrication in many applications, high-temperature suitability, substrate versatility (wood, metal, plastic, glass), electrically conductive possible (graphite) or highly insulating (boron nitride).
Store in the unopened original container in a dry, cool place — typically between +5 and +40 °C, exact values see TDS. Protect water-based products from frost. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store aerosol sprays at low temperature and in a well-ventilated area.
In the comparison table above, you will find related Bonderite products with different properties — different carrier, different solid lubricant, different temperature range, or different application specialization. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate, temperature, load, processing workflow).