Silicones, silicone oils, sprays
Casting and potting resins
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- Bonderite
- Container
- 400 ml
- UFI (Unique Formula Identifier)
- SEH0-UXWP-V203-A409
Product Description
Bonderite L-GP D18A Spray is a MoS₂ aerosol (Pulve MoS₂ D 18 A) as an ultra-fine powder with colloidal fineness for dry lubricating films — application from –200 °C to +390 °C, up to 15 m/s, up to 28'000 kg/cm² pressure.
Bonderite L-GP dry film lubricants from Henkel/Acheson — graphite, PTFE, MoS₂, or boron nitride dispersions that form a firmly adhering film with low coefficient of friction and release properties after drying. L-GP D18A is tailored to specific industrial applications — the key properties and areas of use are listed below.
Bonderite L-GP D18A (formerly Pulve MoS₂ D 18 A) is a MoS₂-containing aerosol — ultra-fine molybdenum disulfide powder in colloidal fineness for dry lubricating films. Applicable under extreme conditions: –200 °C to +390 °C, speeds up to 15 m/s, pressures up to 28'000 kg/cm² with very low relative movements.
What sets L-GP D18A apart
What is L-GP D18A used for?
Processing
Recommended accessories
L-GP D18A in comparison
Direct comparison with related Bonderite products from our range.
L-GP D18A Current Product |
L-GP D17A → | L-GP D31 A → | L-GP 323 → | |
|---|---|---|---|---|
| Technology | MoS₂ aerosol | Dry film lubricant aerosol | Lamellar graphite aerosol | PTFE Aerosol Dispersion |
| Base material | Molybdenum Disulfide | Bonderite Series | Pure lamellar graphite | PTFE + Thermoplastic |
| Carrier | Aerosol | Aerosol | Aerosol | Aerosol |
| Application | Extreme Dry Film | Dry film lubrication | High-temperature dry film | Dry film lubrication |
| Temperature range | –200/+390 °C | see TDS | +1'000 °C | RT-Cure |
| Main application | MoS₂ Extreme Lubrication | Special dry film | Lamellar Graphite Spray | Aerosol PTFE |
Frequently Asked Questions about L-GP D18A
Practical application and design questions — answered by SILITECH.
Bonderite L-GP D18A Spray: MoS₂ aerosol (Pulve MoS₂ D 18 A) as an ultra-fine powder with colloidal fineness for dry lubricating films — application from –200 °C to +390 °C, up to 15 m/s, up to 28'000 kg/cm² pressure. Main applications: small components with cams, plain bearings, gears.
After evaporation of the carrier (water, solvent, or MIBK), dry film lubricants form a firmly adhering lubricating film of solid lubricant (graphite, MoS₂, PTFE, or boron nitride). Advantages over liquid lubricants: no migration, lifelong lubrication in many applications, high-temperature suitability, substrate versatility (wood, metal, plastic, glass), electrically conductive possible (graphite) or highly insulating (boron nitride).
Store in the unopened original container in a dry, cool place — typically between +5 and +40 °C, exact values see TDS. Protect water-based products from frost. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store aerosol sprays at low temperature and in a well-ventilated area.
In the comparison table above, you will find related Bonderite products with different properties — different carrier, different solid lubricant, different temperature range, or different application specialization. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate, temperature, load, processing workflow).