Silicones, silicone oils, sprays
Casting and potting resins
Internal Reference:
43-318.DO.K001
HS Code:
34039900
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- Bonderite
- Manufacturer
- Henkel
- Container
- 1 kg
- UFI (Unique Formula Identifier)
- JGK0-0XG7-620Y-79YU
- Technology
- Lubricant
- Product type
- PTFE dispersion in water
- Application
- Dry film lubricant
- Carrier
- Water
- Flash point
- > 100 °C
Physical Properties
- Solid content
- 39 %
- Density
- 1.17
- Color
- milky white
Features
- Lubricant
- PTFE
- Binder
- Thermoplastic resin
- Surface finish
- Smooth
- Static coefficient of friction
- 0.07
- Fuel and oil resistance
- good
- Solvent resistance
- good
Product Description
Bonderite L-GP 318 is a water-based PTFE dispersion (EMRALON 318) for solvent-sensitive areas — resin-bonded, thin dry film with excellent lubricating and non-stick properties, applicable on flexible substrates.
Bonderite L-GP dry-film lubricants from Henkel/Acheson — graphite, PTFE, MoS₂, or boron nitride dispersions that form a firmly adhering film with a low coefficient of friction and release properties after drying. L-GP 318 is tailored to specific industrial applications — the key properties and areas of use are listed below.
Bonderite L-GP 318 (formerly EMRALON 318) is a resin-bonded polytetrafluoroethylene dry-film lubricant with water as the carrier medium — ideal for areas with solvent bans or restricted ventilation. Flexible — can be applied to non-rigid materials such as plastics (e.g., seals) as well as to rigid metal substrates.
What sets L-GP 318 apart
What is L-GP 318 used for?
Processing
Recommended accessories
L-GP 318 in comparison
Direct comparison with related Bonderite products from our range.
L-GP 318 Current Product |
L-GP 323 → | L-GP 325EF → | L-GP 333-1 EU → | |
|---|---|---|---|---|
| Technology | Water-based PTFE dispersion | PTFE Aerosol Dispersion | PTFE solvent concentrate | Fluorocarbon lubricant in solvent |
| Base material | Polytetrafluoroethylene + thermoplastic | PTFE + Thermoplastic | PTFE + Thermoplastic | Fluorocarbon mixture |
| Carrier | Water | Aerosol | Solvent | Organic solvents |
| Application | Dry film lubrication | Dry film lubrication | Dry film lubrication | Dry film lubrication |
| Temperature range | +70/+90 °C | RT-Cure | RT-Cure | 150 °C Cure |
| Main application | PTFE water system | Aerosol PTFE | PTFE concentrate | Low coefficient of friction |
Frequently asked questions about L-GP 318
Practical application and design questions — answered by SILITECH.
Bonderite L-GP 318: Water-based PTFE dispersion (EMRALON 318) for solvent-sensitive areas — resin-bonded, thin dry film with excellent lubricating and anti-stick properties, applicable on flexible substrates. Main applications: solvent-sensitive areas, plastic substrate coating, general dry film lubrication.
After evaporation of the carrier (water, solvent, or MIBK), dry film lubricants form a firmly adhering lubricating film of solid lubricant (graphite, MoS₂, PTFE, or boron nitride). Advantages over liquid lubricants: no migration, lifelong lubrication in many applications, high-temperature suitability, substrate versatility (wood, metal, plastic, glass), electrically conductive possible (graphite) or highly insulating (boron nitride).
Store in the unopened original container in a dry, cool place — typically between +5 and +40 °C, exact values see TDS. Protect water-based products from frost. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store aerosol sprays at low temperature and in a well-ventilated area.
In the comparison table above, you will find related Bonderite products with different properties — different carrier, different solid lubricant, different temperature range, or different application specialization. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate, temperature, load, processing workflow).