)
SILBIONE Oil 70047 V 100
Medically approved linear PDMS oil from the Silbione range.
Medically approved linear PDMS oil (100 mm²/s) from the Silbione series — biocompatible for medical and pharmaceutical applications
Documents
Internal reference:
40-130
HS code:
39100000
Silbione Huile 70047 V 100 is a medically approved linear PDMS oil (100 mm²/s) from the Silbione range — biocompatible for medical and pharmaceutical applications.
Bluesil/Silbione polydimethylsiloxane oils (PDMS) — chemically inert, thermally stable, with defined viscosity for use as lubricants, separators, dielectrics, hydraulic fluids, and heat transfer fluids. Silbione 70047 V 100 is tailored to specific applications — the most important properties and areas of use are listed below.
Silbione Huile 70047 V 100 is a medically approved polydimethylsiloxane — biocompatible, tested for medical and pharmaceutical applications. Low viscosity (100 mm²/s) for a wide range of pharmaceutical, skincare, and medical device applications.
What distinguishes Silbione 70047 V 100
What is Silbione 70047 V 100 used for?
processing
Silbione 70047 V 100 in comparison
Direct comparison with related fluid products in our range. “— " = not specified in the datasheet.
Silbione 70047 V 100 Current product |
Silbione 70047 V 350 → | Silbione DM 300 GMP → | Silbione 70047 V 12500 → | |
|---|---|---|---|---|
| Product type | PDMS, Medical Grades | PDMS, Medical Grades | Dimethicone, GMP | PDMS, Pharma-Grade |
| Viscosity @25 °C | 100 mm²/s | 350 mm²/s | 300 cSt | 12,500 mm²/s |
| Density @25 °C | 0.965 | 0.970 | 0.97 | 0.970 |
| Flash point | ≥+300 °C | ≥+300 °C | see TDS | ≥+300 °C |
| Stock point | -55 °C | -50 °C | — | — |
| Refractive index | 1.403 | 1.403 | 1.403 | 1.403 |
| Main application | Medicine / Pharmaceuticals | Medicine / Dermatology | Pharmaceutical Excipient (GMP) | Premium pharmaceuticals / cosmetics |
Technical data for SILBIONE Huile 70047 V 100
| Product information | |
|---|---|
| brand | Silbione |
| Manufacturer | Elkem Silicones |
| Container | 1 kg, 5 kg, 200 kg |
| Number of components | 1K (single-component) |
| consistency | Flowable |
| Mixing ratio | Single-component |
| Other features | |
|---|---|
| UV resistance | Yes |
| Physical properties | |
|---|---|
| Paint has hardened | Transparent |
| Self-leveling | Yes |
| Viscosity (cSt) | 100 cSt |
| Density (g/cm³) | 0.966 g/cm³ |
| Viscosity uncrosslinked (mPa·s) | 90 |
| Electrical properties | |
|---|---|
| Electrical insulation | Yes |
| Product approvals | |
|---|---|
| Food contact | Yes |
| Suitable for medical use | Yes |
| Thermal properties | |
|---|---|
| Flash point (°C) | 305 °C |
| Pour point (°C) | -55 °C |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Documents and datasheets
Click on a document for a preview or the download icon for a direct download.
Technical Data Sheets (TDS) 3
Frequently asked questions about Silbione 70047 V 100
Practical application and design questions — answered by SILITECH.
Silbione Oil 70047 V 100: Medically approved linear PDMS oil (100 mm²/s) from the Silbione range — biocompatible for medical and pharmaceutical applications. Main applications: Medical device applications, pharmaceutical excipients, skincare component.
PDMS (polydimethylsiloxane) is a linear silicone fluid with high thermal stability, low surface tension, very good dielectric properties, and a wide temperature range. The viscosity (in mm²/s = cSt) determines the application range—low viscosities for volatile lubrication and hydraulics, high viscosities for antifoaming, damping, and conditioning.
Store in the unopened original container in a dry, cool place — typically between +5 and +30 °C, see TDS for exact values. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging — Elkem guarantees the product's specifications only until the date shown.
The comparison table above lists related products with similar functions or specifications. If you are unsure which product is best, we would be happy to advise you — contact SILITECH with details of your application (desired properties, substrate, processing workflow).
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Product information | |
|---|---|
| Container | 1 kg or 5 kg or 200 kg |
| brand | Silbione |
| Manufacturer | Elkem Silicones |
| Number of components | 1K (single-component) |
| consistency | Flowable |
| Mixing ratio | Single-component |
| Other features | |
|---|---|
| UV resistance | Yes |
| Physical properties | |
|---|---|
| Paint has hardened | Transparent |
| Self-leveling | Yes |
| Viscosity (cSt) | 100 cSt |
| Density (g/cm³) | 0.966 g/cm³ |
| Viscosity uncrosslinked (mPa·s) | 90 |
| Electrical properties | |
|---|---|
| Electrical insulation | Yes |
| Product approvals | |
|---|---|
| Food contact | Yes |
| Suitable for medical use | Yes |
| Thermal properties | |
|---|---|
| Flash point (°C) | 305 °C |
| Pour point (°C) | -55 °C |
| Keywords | |
|---|---|
| Keywords | |
| processing | |
|---|---|
| Viscosity of mixture | 100 mPa·s |
| Physical & Thermal | |
|---|---|
| Density (23°C) | 0.97 g/cm³ |
| Refractive index n (20°C) | 1.403 |
| Temperature resistance (duration) | -50 to 200 °C |
| Peak temperature (short-term) | 200 °C |
| thermal conductivity | 0.16 W/(m·K) |
| storage | |
|---|---|
| Shelf life in original packaging | 36 months |
| Storage temperature | -20 to 50 °C |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download:
- Silbione FLD 70047V100 - Fiche Technique FR.pdf (136 KB)
- Silbione FLD 70047V100 - Fiche de Sécurité FR.pdf (381 KB)
- Silbione FLD 70047V100 - Scheda di Sicurezza IT.pdf (371 KB)
- Silbione FLD 70047V100 - Safety Data Sheet DE.pdf (186 KB)
- Silbione FLD 70047V100 - Technical Data Sheet EN.pdf (526 KB)
- Silbione FLD 70047V100 - Technical Data Sheet DE.pdf (137 KB)