Silicones, silicone oils, sprays
Casting and potting resins)
HS Code:
39100000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Curing type
- Non-reactive
- Container
- 1kg, 5kg, 25kg, 200kg, 950kg
Physical Properties
- Cured Color
- Transparent
- Viscosity (cSt)
- 50 cSt
- Density (g/cm³)
- 0.960 g/cm³
Electrical Properties
- Electrical Insulation
- Yes
Product Approvals
- Food contact
- No
- Medical grade
- No
- Certificates
- RoHS, REACH
Thermal Properties
- Flash point (°C)
- 280 °C
- Pour point (°C)
- -55 °C
Product Description
SILISIL Silicone Oil 50 cSt is a versatile industrial fluid for lubrication, hydraulics, release agents and care formulations.
SILISIL Silicone Oils are high-purity linear polydimethylsiloxane (PDMS) liquids with a purity of 100%. Their viscosity of 50 cSt defines their application range—from lubrication and release agents to hydraulic functions and specialized care and industrial applications.
50 cSt covers a particularly wide range of applications — lubrication with higher viscosity, release agents with longer service life, hydraulic components with moderate damping.
What distinguishes SILISIL Silicone Oil 50 cSt
What is SILISIL Silicone Oil 50 cSt used for?
Important Notes
Which viscosity for which application?
SILISIL Silicone Oil 50 cSt in direct comparison with related viscosities in our product range.
50 cSt Current Product |
20 cSt → | 100 cSt → | 1000 cSt → | |
|---|---|---|---|---|
| Viscosity (cSt) | 50 | 20 | 100 | 1'000 |
| Main application | Pneumatics & Compressed Air Lubrication | Capacitor impregnation | Injection molding release agent | Demanding Industrial Lubrication |
Frequently asked questions about SILISIL Silicone Oil 50 cSt
Practical application and design questions — answered by SILITECH.
SILISIL Silicone Oil 50 cSt: Versatile industrial fluid for lubrication, hydraulics, release agents, and care formulations. Main applications include pneumatic and compressed air lubrication, long-lasting release agents, and conditioners in personal care.
PDMS (polydimethylsiloxane) is a linear silicone fluid that combines high thermal stability, low surface tension, very good dielectric properties, and broad temperature resistance. The viscosity (measured in centistokes, cSt) determines the field of application — low viscosities are suitable for volatile applications and lubrication, high viscosities for damping and conditioners.
SILISIL Silicone Oils are soluble in aromatic, aliphatic, and chlorinated solvents (e.g., toluene, xylene, hexane, diesel). They are not miscible with water and alcohols. For anti-foam applications, high-viscosity PDMS is diluted in hydrocarbon solvents and introduced using a dosing pump.
Store in the unopened original container at room temperature (ideally below 60 °C). Avoid eye contact. SILISIL Silicone Oils are generally non-toxic, odorless, and tasteless — nevertheless, consult the Safety Data Sheet (SDS), which is available in the "Documents" tab.
The viscosity determines the application. 50 cSt is optimal for pneumatic and compressed air lubrication and similar application profiles. For other application characteristics, you will find related viscosities in the comparison table above — if you are unsure, we will be happy to advise you on your specific application.