Silicones, silicone oils, sprays
Casting and potting resins)
Internal reference:
40-807
HS code:
39100000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Physical and thermal
- Density (23 °C)
- 1 g/cm³
- Temperature resistance (duration)
- -40 to 200 °C
- Peak temperature (briefly)
- 200 °C
Storage
- Shelf life in original packaging
- 36 months
- Storage Temperature
- 2 to 40 °C
Product Information
- Brand
- Bluesil
- Manufacturer
- Elkem Silicones
- Curing type
- Non-reactive
- Number of components
- 1K (one-component)
- Consistency
- Thixotropic
- Mixing Ratio
- One-component
- Container
- 100g, 250g, 1kg, 5kg, 25kg
Further Properties
- UV resistance
- Yes
Physical Properties
- Cured Color
- White
- Self-leveling
- No
Electrical Properties
- Electrical Insulation
- Yes
Product Approvals
- Food contact
- No
- Medical grade
- No
Product Description
Bluesil Paste 7 is a silicone paste from the Bluesil range for industrial lubrication and sealing applications with a defined application profile.
Bluesil/Silbione silicone pastes — filled PDMS compounds for thermal bonding, vacuum sealing, dielectric insulation, and heat conduction applications. Paste 7 is tailored to specific applications — the most important properties and areas of application are listed below.
Bluesil Paste 7 is a silicone paste from the Bluesil industrial range — formulated for specific lubrication and sealing applications. Application recommendations are available from SILITECH.
What makes Paste 7 stand out
What is Paste 7 used for?
Processing
Recommended accessories
Paste 7 in comparison
Direct comparison with related paste products in our range. “— "” = not specified in the data sheet.
Paste 7 Current Product |
Paste 4 → | Paste 340 → | Paste 408 → | |
|---|---|---|---|---|
| Consistency | Industrial Paste | Universal Paste | Thermal paste | Special paste |
| Penetration | see TDS | see TDS | 280 (1/10 mm) | see TDS |
| Thermal conductivity. | see TDS | see TDS | 0.41 W/m·K | see TDS |
| Temperature Range | see TDS | see TDS | –40 / +250 °C | see TDS |
| Color | see TDS | see TDS | White | see TDS |
| Main application | Industrial lubricant/sealant | Industrial universal | Thermal bonding electronics | Bluesil Special Application |
Frequently Asked Questions about Paste 7
Practical application and design questions — answered by SILITECH.
Bluesil Paste 7: Silicone paste from the Bluesil range for industrial lubrication and sealing applications with a defined application profile. Main applications: industrial lubrication, industrial sealing, corrosion protection.
Apply to clean, dry surfaces — degrease beforehand if necessary. Application with brush, spatula, or paste gun. For thermal pastes, apply thinly and evenly — excessive layer thickness reduces thermal conductivity. Pastes can be diluted with aliphatic or chlorinated solvents if thin layers are required.
Store in the unopened original container in a dry, cool place — typically standard between +5 and +30 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiration date on the packaging — Elkem guarantees the sales specifications only up to the stated date.
In the comparison table above, you will find related products with similar functions or related specifications. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your application (desired property, substrate, processing workflow).