Knowledge Center | SILITECH

12 items

Brand: SILISIL ×

Silicone mold for concrete: tear resistance, Shore hardness and release agent

Silicone molds for concrete: tear resistance, Shore hardness, and release agents. Concrete casting is difficult to mold: heavy, often undercut parts, alkaline material, and many impressions. A silicone mold must...

Industry: Construction & Building Brand: SILISIL Type: Application World: Mold Making & Molding World: Silicones

16.06.2026

0 7

Addition-curing silicone does not harden: Identify inhibitors

Addition-curing silicone fails to harden: Identifying inhibitors. If an addition-curing (platinum-catalyzed) silicone remains sticky or liquid, inhibition is almost always the culprit: Certain ...

Brand: SILISIL Type: FAQ World: Mold Making & Molding World: Silicones World: Processing & Dispensing Technology

16.06.2026

0 9

Cracks in the potting compound: causes and material selection

Cracks in the potting compound: Causes and material selection. A cracked potting compound loses its protective function – moisture and other substances penetrate, and the mechanical support is lost. Cracks almost always have a cause...

Industry: Electronics & Printed Circuit Boards Property: Temperature Resistant Brand: Elkem Brand: SILISIL Type: Guide World: Processing & Dispensing Technology World: Potting & Electronic Protection

16.06.2026

0 10

Thermally conductive potting compound for batteries and BMS

Thermally conductive potting compound for batteries and BMS. In battery modules and BMS, thermal management determines performance, lifespan, and safety. Thermally conductive potting and gap filler materials...

Industry: E-Mobility & Battery Industry: Energy & High Voltage Property: Electrically insulating Property: Thermally conductive Brand: Elkem Brand: SILISIL Type: Application World: Encapsulation & Electronic Protection

16.06.2026

0 10

Electronics protection against salt, fog and fluctuating humidity

Electronic protection against salt, fog and fluctuating humidity: Coastal areas, marine environments, road traffic and industrial atmospheres expose electronics to a particularly aggressive combination of: salt, fog and...

Industry: Electronics & Printed Circuit Boards Industry: Mechanical Engineering & Industrial Property: Chemical Resistant Property: Electrically Insulating Brand: SILISIL Type: Application World: Surface Treatment & Corrosion Protection World: Potting & Electronic Protection

16.06.2026

0 12

Protecting printed circuit boards from condensation: why IP protection alone is not enough

Protecting printed circuit boards from condensation: why IP protection alone is not enough. Condensation is one of the most underestimated causes of failure in electronics. It forms precisely where it is least expected...

Industry: Electronics & Printed Circuit Boards Property: Electrically insulating Property: UV & weather resistant Brand: Elkem Brand: SILISIL Type: Application World: Surface treatment & corrosion protection World: Potting & electronic protection

16.06.2026

0 10

Potting compound for high-voltage components

Potting compound for high-voltage components. At high voltage, the potting system determines breakdown, partial discharge, and service life. The most significant obstacle is air inclusions – even the smallest air pockets...

Industry: Electronics & Printed Circuit Boards Industry: Energy & High Voltage Property: Electrically Insulating Property: Temperature Resistant Brand: Elkem Brand: SILISIL Type: Application World: Encapsulation & Electronic Protection

15.06.2026

0 12

Potting compound for connectors and cable exits

Potting compound for connectors and cable exits. Connectors and cable exits are the most mechanically and sealingly critical points in an assembly. Potting provides three benefits here: ...

Industry: Electronics & Printed Circuit Boards Industry: Mechanical Engineering & Industrial Property: Electrically Insulating Property: Temperature Resistant Brand: Elkem Brand: SILISIL Type: Application World: Encapsulation & Electronic Protection

15.06.2026

0 12

Potting compound for outdoor sensors

Potting compound for outdoor sensors. Sensors used outdoors are constantly exposed to moisture, UV radiation, temperature fluctuations, and various media. Potting reliably protects the electronics – but must not compromise the...

Industry: Electronics & Printed Circuit Boards Industry: Mechanical Engineering & Industrial Property: Electrically insulating Property: Temperature resistant Property: UV & weather resistant Brand: Elkem Brand: SILISIL Type: Application World: Encapsulation & Electronic Protection

15.06.2026

0 12

Potting compound for LED drivers: heat, moisture and electrical insulation

Potting compound for LED drivers: Heat, moisture and electrical insulation. LED drivers operate continuously, are often located in humid or exposed environments and carry high voltages on the mains side...

Industry: Electronics & Printed Circuit Boards Industry: Mechanical Engineering & Industrial Property: Electrically insulating Property: Temperature resistant Property: Thermally conductive Brand: Elkem Brand: SILISIL Type: Application World: Encapsulation & Electronic Protection

15.06.2026

0 13

Potting compound for inductive components: coils, chokes and transformers

Potting compound for inductive components: coils, chokes and transformers. Coils, chokes and transformers place different demands on a potting compound than a flat printed circuit board: they...

Industry: Electronics & Printed Circuit Boards Industry: Energy & High Voltage Industry: Mechanical Engineering & Industrial Property: Electrically Insulating Property: Temperature Resistant Property: Thermally Conductive Brand: Elkem Brand: SILISIL Type: Application World: Encapsulation & Electronic Protection

15.06.2026

0 12

RTV-2 silicones in architectural model making | SILITECH

When every tenth of a millimeter counts. Midnight in the studio. Scale 1:200. Deadline at 8:00 AM. The facade lives from 0.5 mm ribs and precise shadow gaps. Plaster cracks. Epoxy warps. Time is running out...

Industry: Art, Model & Mold Making Brand: Elkem Brand: SILISIL Type: Application World: Mold Making & Molding

04.09.2025

0 1369

What you will find here

On the SILITECH blog, we share in-depth expertise, technical background information, and practical examples to help you optimally utilize our products and sustainably improve your processes. Benefit from our know-how gained from over 25 years of industry experience.

Archive

Keywords

Industry: Construction & Building Industry: E-Mobility & Batteries Industry: Electronics & Printed Circuit Boards Industry: Energy & High Voltage Industry: Art, Model & Mold Making Industry: Mechanical Engineering & Industry Industry: Medical Technology Property: Biocompatible Property: Chemical Resistant Property: Electrically Insulating Property: Electrically Conductive Property: High Strength Property: Temperature Resistant Transparent : UV & Weather Resistant Property: Thermally Conductive Brand: Elkem Brand: Henkel/Loctite Brand: Merbenit Brand: Molydal Brand: Permabond Brand: SILIRESIN Brand: SILISIL Type: Application Type: FAQ Type: Guide Type: Fact Sheet Type: Comparison World: Mold Making & Molding World: Bonding & Sealing World : Surface Treatment & Corrosion Protection World: Lubrication & Separation World : Silicones World: Processing & Dispensing Technology World: Potting & Electronic Protection