Knowledge Center.
Practical knowledge about silicones, adhesives, potting compounds, lubricants and release agents: basics, selection criteria and application instructions, organized by topic, industry and brand.
Overview
All specialist articles
The complete knowledge center at a glance, automatically updated by topic.
silicones (7)
Biocompatible silicones: ISO 10993 and USP Class VI at a glance | SILITECH
A day without silicone
Elkem silicones: the complete product range at a glance
RTV-1 vs. RTV-2 Silicones: The Complete Comparison | SILITECH
Choosing the right Shore hardness: Explained from 0A to 90A | SILITECH
Silicone rubber: The complete guide to types, applications and market developments 2026
Silicone Oil Guide: Viscosities, Applications and Selection (0.65 to 300,000 cSt)
Bonding & Sealing (16)
Bonderite and conversion coatings: corrosion protection and adhesion primer
Cyanoacrylate (superglue): types, substrates, limitations
Sealants compared: silicone, MS polymer, polyurethane, acrylic
Industrial adhesives compared: epoxy, cyanoacrylate, anaerobic, UV, MMA. Which adhesive for which application?
Understanding adhesive curing: pot life, curing time, temperature influence
Gluing plastic: Which adhesive will stick to which type of plastic?
Loctite 5910: Silicone flange gasket (FIPG)
Loctite 638: High-strength shaft-hub connection
MS polymer (SMP): the versatile hybrid for bonding and sealing
Bonding metal without welding: 5 high-performance adhesives compared | SILITECH
Surface preparation before gluing: clean, roughen, activate
Permabond adhesives: product range, technical data & Loctite comparison
Primers and adhesion promoters: when needed and which one for which adhesive
Selecting and correctly using threadlockers | SILITECH
Remove silicone and adhesive residues completely
UV and light-curing adhesives: A guide to selection and process
Potting & Electronic Protection (14)
Bio-Resin: A comparison of bio-based casting resins
Conformal Coatings: Protective coatings for printed circuit boards compared | SILITECH
Potting electronics: Step-by-step instructions
Epoxy resin basics: Mixing, processing, typical mistakes
Potting vs. Encapsulation: Differences and Applications in Electronics | SILITECH
Thermal Interface Materials: Gap Fillers, Pads and Pastes vs. Potting Compound
Thermally conductive potting compounds: λ-values explained | SILITECH
Avoid potting defects: bubbles, delamination, shrinkage, pot life
Potting compound for high-voltage components
Potting compound for LED drivers: heat, moisture and electrical insulation
Potting compound for outdoor sensors
Potting compound for connectors and cable exits
Potting compound for inductive components: coils, chokes and transformers
Potting compounds and electrical casting resins for electronics: epoxy, silicone or PU?
Lubrication & Separation (5)
Industrial lubricants for forming, casting and maintenance | SILITECH
Proper use of NSF H1 lubricants
PFPE high-performance lubricants: when conventional oils fail
Silicone paste and silicone grease: applications, compatibility and selection
How to use silicone spray correctly, and when it's better not to
Mold making & molding (3)
By theme world
Themed worlds
Technical knowledge by material group: basics, selection criteria and instructions for processing in industrial practice.
silicones
RTV-1 and RTV-2 silicones, silicone oils and greases: curing systems, Shore hardness, viscosity and product-specific biocompatible types.Bonding & Sealing
Threadlockers, anaerobic adhesives, cyanoacrylates, structural adhesives and FIPG: selection according to substrate, gap size and strength.Potting & Electronic Protection
Potting compounds, electrical casting resins and conformal coatings for electronics protection: selection based on pot life, mechanics and protection requirements.Mold making & molding
Silicones and casting resins for dimensionally accurate molds and castings: selection according to crosslinking system, Shore hardness and release agent.Lubrication & Separation
Industrial lubricants, special greases and release agents: selection based on temperature, load, material pairing and residue behavior.By industry
Industry solutions
What material requirements your industry typically has and which product groups are relevant: from electronics to mechanical engineering.
To know
Most-read articles
The most requested topics from our knowledge center.
Biocompatible silicones: ISO 10993 and USP Class VI
Conformal Coatings: Protective coatings for printed circuit boards
Potting compounds & electro-casting resins for electronics
Loctite 638: High-strength shaft-hub connection
Elkem silicones: the complete product range at a glance
Selecting and correctly using screw locking devices
After application
Application Hub
Starting point according to goal: what you want to achieve, and which materials and methods will lead there.
Protect electronics
Conformal coating, potting, thermal management, insulation and EMI shielding: an overview of protection methods to aid decision-making.
Gluing instead of welding
Joining instead of welding, screwing or riveting: structural adhesives, anaerobic shaft-hub joining and flange gaskets as decision-making aids.
Molds & Molds
Flexible silicone molds and dimensionally accurate castings: crosslinking system, Shore hardness and release agent for model making, art and series production.
Aerospace & Defense
Silicone protection for electronics in drones, aircraft and defense technology: potting, encapsulation, sealing, coating and thermal management with Bluesil and CAF.
contact
Material question still open?
Describe the application, material, and load. We will review suitable products, technical data sheets, and possible alternatives.