Knowledge Center | SILITECH

33 articles

adhesive ×

MS polymer (SMP): the versatile hybrid for bonding and sealing

MS polymer combines the best of silicone and PU: strong adhesion, paintable, elastic. Properties and applications.

World: Gluing & Sealing

14.06.2026

0 22

Cyanoacrylate (superglue): types, substrates, limitations

Using cyanoacrylate quickly and effectively: types, suitable substrates, primers for difficult plastics and the most important limitations.

World: Gluing & Sealing

14.06.2026

0 32

Primers and adhesion promoters: when needed and which one for which adhesive

When does an adhesive bond require a primer? How adhesion promoters work and which one is suitable for which adhesive and material.

World: Gluing & Sealing

14.06.2026

0 11

Surface preparation before gluing: clean, roughen, activate

The surface determines the adhesion. Cleaning, roughening, activating, priming – the correct sequence and common mistakes.

World: Bonding & Sealing World: Surface Treatment & Corrosion Protection

14.06.2026

0 13

Remove silicone and adhesive residues completely

Remove silicone, adhesive and sealant cleanly – mechanically and chemically, without damaging the substrate.

World: Bonding & Sealing World: Surface Treatment & Corrosion Protection

14.06.2026

0 24

Bonderite and conversion coatings: corrosion protection and adhesion primer

Conversion coatings protect against corrosion and improve the adhesion of paint and adhesives. An overview of the process, materials, and selection.

World: Surface treatment & corrosion protection

14.06.2026

0 17

Gluing plastic: Which adhesive will stick to which type of plastic?

Which adhesives bond to PE, PP, PTFE, ABS, PC & Co.? Substrate guide with selection assistance, primer tips and pretreatment for difficult plastics.

World: Gluing & Sealing

13.06.2026

0 66

Potting vs. Encapsulation: Differences and Applications in Electronics | SILITECH

Electronic assemblies increasingly need to function reliably under extreme conditions. Whether moisture, dust, chemicals, or mechanical stress – the right protection is crucial for longevity and reliability. Two methods dominate: potting (full encapsulation) and...

Industry: Electronics & Printed Circuit Boards Type: Guide World: Potting & Electronic Protection

06.06.2026

0 584

Elkem silicones: the complete product range at a glance

Rhodorsil and Bluesil are the two brands of Elkem Silicones (formerly Bluestar Silicones / Rhodia), one of the world's largest silicone manufacturers. While Rhodorsil is the traditional brand for silicone oils, pastes, and specialty products, Bluesil represents the modern product line of...

Brand: Elkem Type: Profile World: Silicones

20.04.2026

0 2746

Industrial adhesives compared: epoxy, cyanoacrylate, anaerobic, UV, MMA. Which adhesive for which application?

Epoxy, cyanoacrylate, anaerobic, UV, or MMA – which industrial adhesive is right for your application? This guide compares the five main adhesive technologies based on strength, durability, and longevity.

Type: Comparison World: Adhesives & Sealants

07.04.2026

0 906

A day without silicone

Contents I. 6:30 a.m. II. The commute to work — electromobility and ceramification III. Waterfalls, war, and sticky masses — the history of silicon IV. A sphere barely larger than a marble — the...

Type: Use Case World: Silicones

03.04.2026

0 460

Potting compounds and electrical casting resins for electronics: epoxy, silicone or PU?

Electronic assemblies must be reliably protected against moisture, mechanical stress, and temperature fluctuations. Electro-potting resins and potting solutions offer this protection – but which material is the right one? This article compares epoxy, silicone, and...

Industry: Electronics & Printed Circuit Boards Property: Electrically insulating Type: Comparison World: Encapsulation & Electronic Protection

30.03.2026

0 3168

1
2
3

What you will find here

On the SILITECH blog, we share in-depth expertise, technical background information, and practical examples to help you optimally utilize our products and sustainably improve your processes. Benefit from our know-how gained from over 25 years of industry experience.

Archive

Keywords

Industry: Construction & Building Industry: E-Mobility & Batteries Industry: Electronics & Printed Circuit Boards Industry: Energy & High Voltage Industry: Art, Model & Mold Making Industry: Mechanical Engineering & Industry Industry: Medical Technology Property: Biocompatible Property: Chemical Resistant Property: Electrically Insulating Property: Electrically Conductive Property: High Strength Property: Temperature Resistant Transparent : UV & Weather Resistant Property: Thermally Conductive Brand: Elkem Brand: Henkel/Loctite Brand: Merbenit Brand: Molydal Brand: Permabond Brand: SILIRESIN Brand: SILISIL Type: Application Type: FAQ Type: Guide Type: Fact Sheet Type: Comparison World: Mold Making & Molding World: Bonding & Sealing World : Surface Treatment & Corrosion Protection World: Lubrication & Separation World : Silicones World: Processing & Dispensing Technology World: Potting & Electronic Protection