Silicones, silicone oils, sprays
Casting and potting resins
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Brand
- Permabond
- Manufacturer
- Permabond Engineering Adhesives Ltd
- Container
- 200 g
- UFI (Unique Formula Identifier)
- FTK0-S0MU-T00S-HQT2
Performance at Full Cure
- Torque strength (M10 steel ISO10964) Breakloose
- 28 N·m
- Shear strength (steel ISO10123)
- 30 MPa
- Dielectric Strength
- 11 kV/mm
- Thermal conductivity
- 0.19 W/(m.K)
Physical Properties
- Chemical group
- Methacrylate ester
- Color
- Brown
- Viscosity at 20 rpm
- 5000
- Specific Gravity
- 1.0
- Fluorescence
- no
Curing values
- Functional strength (M10 steel)@23°C
- 1 hour
- Ultimate strength (M10 steel)@23°C
- 24 hours
Thermal Properties
- Coefficient of thermal expansion
- 90 x 10-6 mm/mm/°C
- Storage Temperature (°C)
- 5-25
Features
- Gap fill up to
- 0.3mm
- Thread size up to
- M50
- Hand tight (M10 steel)@23°C
- 15 minutes
Product Description
Permabond F 201 HV is a high-strength anaerobic adhesive with hydrogen certification (KIWA KE214) — specifically for H₂ systems, valves, and couplings, conforming to EN751-1 and Gastec QA.
Permabond anaerobic curing adhesives — crosslink under exclusion of air between metal surfaces, ideal for thread locking, bushings, shaft-hub connections, and potable water applications. F 201 HV is tailored to specific applications — the key properties and areas of use are listed below.
Permabond F 201 HV is a high-viscosity variant with hydrogen certification (KIWA KE214) and Gastec QA EN751-1 conformity. Specifically for H₂ systems, valves, and couplings — the most demanding application for anaerobic adhesives.
What sets F 201 HV apart
What is F 201 HV used for?
Processing
Recommended accessories
F 201 HV in comparison
Direct comparison with related Permabond products from our range.
F 201 HV Current Product |
F 201 → | MM 115 Pure → | MM 115 blue → | |
|---|---|---|---|---|
| Chemical Base | Anaerobic (Methacrylate) | Anaerobic (Methacrylate) | Anaerobic Methacrylate | Anaerobic Methacrylate |
| Viscosity | high viscosity | see TDS | thixotropic | thixotropic |
| Grade | Industrial / H₂ / Gas | Industrial / Drinking water | NSF/ANSI 61 | MIL-S-46163A Type II |
| Color | see TDS | see TDS | colorless | blue |
| Set Time | see TDS | see TDS | see TDS | see TDS |
| Full Cure | 24 h | 24 h | 24 h | 24 h |
| Main application | H₂ + Gas + Potable Water | Potable Water + High Strength | Drinking Water Threadlocking | Industrial Threadlocker |
Frequently Asked Questions about F 201 HV
Practical application and design questions — answered by SILITECH.
Permabond F 201 HV: High-strength anaerobic adhesive with hydrogen certification (KIWA KE214) — specifically for H₂ systems, valves, and couplings, compliant with EN751-1 and Gastec QA. Main applications: hydrogen systems, gas connections, drinking water systems.
Anaerobic adhesives crosslink in the absence of air between active metal surfaces. As long as the adhesive has contact with oxygen (open bottle, thin layer in air), it remains liquid. When enclosed between two metal surfaces, crosslinking begins within minutes. Ideal for thread locking, bushings, shaft-hub connections — wherever metal is bonded to metal with a tight gap.
Store in the unopened original container in a dry, cool place — Permabond adhesives typically between +5 and +25 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store cyanoacrylates cool (ideally refrigerated) for maximum shelf life.
In the comparison table above, you will find related Permabond products with different properties — viscosity, mixing ratio, special certification. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate pairing, load, curing condition).