Silicones, silicone oils, sprays
Casting and potting resins)
)
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Manufacturer
- Permabond Engineering Adhesives Ltd
- Brand
- Permabond
- Container
- 50 ml, 400 ml
- Country of origin
- Italy
- Mixing Ratio
- 1:1
Cure speed (oven)
- Full strength at 60°C
- 1 hour
Physical Properties A
- Chemical Group (A)
- Epoxy resin
- Color (A)
- White
- Viscosity 20rpm (A)
- 50000-80000
- Viscosity 2rpm (A)
- 200000-300000
- Specific gravity (A)
- 1.3
- UFI Part A
- WXF0-00K0-100H-SCK5
Physical Properties B
- Chemical Group (B)
- Polyamine hardener
- Color (B)
- Ivory
- Viscosity 20rpm (B)
- 100000-200000
- Viscosity 2rpm (B)
- 250000-400000
- Specific Gravity (B)
- 1.3
- UFI Part B
- RDK0-805V-900A-70VR
Performance at Full Cure
- Peel resistance (aluminum) (ISO 4578)
- 30-50 N/25mm
- Dielectric strength
- 15-25 kV/mm
Bonding Properties
- Functional Strength
- 16 hours
Physical Properties
- Color
- Off-white
- Viscosity (adhesives)
- Paste
Curing values
- Maximum gap fill (mm)
- 2
- Pot Life at 23°C
- 50-80 minutes
- Hand Strength at 23°C
- 3-5 hours
Mechanical properties
- Hardness (Shore D)
- 75-85
Shear strength ISO 4587 in N/mm²
- Steel
- 19-21
Thermal Properties
- Operating temperature (°C)
- -40 to +80
- Storage Temperature (°C)
- 5-25
Features
- Functional strength at 60°C
- 30 minutes
- TG Value
- +40-50°C
Product Description
Permabond ET5145 is a food-approved 2K epoxy with an ivory-colored cure — the choice when aesthetic requirements are also necessary in addition to food contact.
Unlike the black and white variant ET5143, ET5145 has an ivory-colored cure – visible adhesive seams remain visually discreet. With a steel tensile strength of 19–21 N/mm², the product falls within the high-strength range of food-grade epoxies.
EU 10/2011 approved 2-component epoxy with ivory-colored curing — combines direct food contact with an aesthetically pleasing bond line. For visible bonding in food processing facilities with high design standards.
What distinguishes Permabond ET5145
What is Permabond ET5145 used for?
Processing
Recommended accessories
Important Notes
Which Permabond 2K epoxy for which application?
Permabond ET5145 in direct comparison with related products of the ET series.
Permabond ET5145 Current Product | Permabond ET5143 → | Permabond ET5162 → | Permabond ET5147 → | |
|---|---|---|---|---|
| Application / Property | Food-grade 2K epoxy — ivory | Different shade | Lower strength | Cream-colored version |
| Mixing ratio | 1:1 by volume | 1:1 | 2:1 | 1:1 |
| Pot life | — | — | 60–80 min | 40–60 min |
| Steel shear strength | 19-21 N/mm² | 18–22 N/mm² | 10–15 N/mm² | 18–20 N/mm² |
| Carbon fiber | — | — | — | — |
Frequently asked questions about Permabond ET5145
Practical application and design questions — answered by SILITECH.
Food-grade, ivory-colored two-component epoxy resin for aesthetically pleasing food bonding. The two-component epoxy is mixed in a 1:1 volume ratio and offers a pot life of —.
Mix both components in a 1:1 ratio by volume — using the mixing nozzle for dual cartridges, weigh precisely for larger containers. Apply within the pot life (—) and join components. Full curing typically occurs after — at room temperature.
The pot life of Permabond ET5145 is typically — at 23 °C. Higher temperatures shorten, lower temperatures lengthen the pot life. Mixing quantities above approximately 100 g may gel more quickly due to an exothermic reaction.
Permabond ET5145 bonds reliably to steel: 19–21 N/mm². For thermoplastic substrates, test compatibility before series production.
Permabond ET5145 is approved according to EU 10/2011 for food contact. Compliance letters and detailed certificates are available from Permabond/SILITECH.
Permabond ET5145 is a food-grade, two-component epoxy resin in ivory (1:1 volume mix, pot life). Permabond ET5143 is a food-grade black/white epoxy resin (1:1 mix, pot life) in a different color.
From the Permabond 2K epoxy range, select according to application, mixing ratio, and strength requirements: Permabond ET5145 (Food-approved 2K epoxy – ivory); Permabond ET5143 (Food Black/White); Permabond ET5162 (Food Low Strength); Permabond ET5147 (Food Cream). For aerospace, see ET515 (Aircraft Seat Trays); for food, ET5162 (EU 10/2011 + FDA); for thermal conductivity/fire protection, ET5441 (UL94-V0).