PERMABOND ES574.5
Special 1K epoxy (engineering) — on request
Special 1K epoxy ES574.5 — Engineering applications with SILITECH consulting.
Internal reference:
49-574.5.KT
Permabond ES574.5 is a special 1K epoxy for engineering applications.
Engineering variant with special profile.
Special 1K epoxy ES574.5 for engineering applications — technical data available via SILITECH distribution.
What distinguishes Permabond ES574.5
What is Permabond ES574.5 used for?
processing
Recommended accessories
Important instructions
Which Permabond 1K epoxy is suitable for which application?
Permabond ES574.5 in direct comparison with related products of the ES series.
Permabond ES574.5 Current product | Permabond ES5744 → | Permabond ES560 → | Permabond ES578 → | |
|---|---|---|---|---|
| Application | Special 1K epoxy (engineering) | Comparable | Comparable | Flame retardant |
| Chemistry | One-component epoxy resin | 1K epoxy | 1K epoxy | 1K epoxy |
| Curing | Heat Cure | Heat Cure | Heat Cure | Heat Cure |
Technical data for PERMABOND ES574.5
| Product information | |
|---|---|
| brand | Permabond |
| Container | 320 ml |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
No public documents are available.
We will gladly send you the TDS and SDS by email upon request; please submit a request.
Frequently asked questions about Permabond ES574.5
Practical application and design questions — answered by SILITECH.
Special 1K epoxy ES574.5 for engineering applications. 1K epoxies are processed directly without mixing and cured in a single heat-cure step.
One-component (1K) epoxies are processed directly from the container without mixing—no pot life limitations, no mixing errors. Disadvantage: Heat curing is required (industrial oven, IR lamp, or hot air). Two-component (2K) epoxies cure at room temperature but require precise mixing and have a limited pot life. One-component (1K) epoxies are suitable for line production with heat-curing infrastructure, while two-component (2K) epoxies are suitable for workshops without an oven.
Heat curing. For exact conditions, see Permabond-TDS — typically 30 minutes at 150 °C or equivalent heat input (e.g. 60 min @ 120 °C).
One-component heat-cure epoxies bond metals (steel, aluminum, copper), composites (CFRP, GFRP), ceramics, and selected heat-resistant plastics. Substrates must tolerate the curing temperature (typically 150 °C).
Permabond ES574.5 does not have specific industry approvals such as UL94-V0 (see ES578 for the flame-retardant variant). For general industrial applications, the product is approved according to Permabond standards.
Store between 5 and 25 °C. 1K heat-cure epoxies have limited storage stability—reactivity decreases with increasing storage temperature. For long shelf life, store refrigerated. Allow the adhesive to warm to room temperature before opening.
From the Permabond 1K epoxy range: Permabond ES574.5 (Special 1K epoxy (Engineering)); Permabond ES5744 (Engineering); Permabond ES560 (Engineering); Permabond ES578 (UL94-V0). For UL94-V0 fire protection, see ES578; for high temperature, see ES566/ES569; for IR/hot air curing (without an industrial oven), see ES5691.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| brand | Permabond |
| Container | 320 ml |
| Keywords | |
|---|---|
| Keywords | |