Silicones, silicone oils, sprays
Casting and potting resins)
HS Code:
39100000
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Curing type
- Non-reactive
- Viscosity (silicone oils)
- Low-viscosity silicone oils: 0.65 cSt (more fluid than water) to 10 cSt (almost water-thin)
- Container
- 100g, 1kg, 2kg, 10kg, 20kg, 150kg, 950kg
- Temperature resistance
- Medium (up to 200°C)
Physical Properties
- Cured Color
- Transparent
- Viscosity (cSt)
- 0.65 cSt
- Density (g/cm³)
- 0.760 g/cm³
Electrical Properties
- Electrical Insulation
- Yes
Product Approvals
- Food contact
- No
- Medical grade
- No
- Certificates
- RoHS, REACH
Thermal Properties
- Flash point (°C)
- -2 °C
- Pour point (°C)
- -68 °C
Product Description
SILISIL Silicone Oil 0.65 cSt is a highly volatile silicone fluid (hexamethyldisiloxane) — evaporates without residue for cosmetics, release agent applications and solvent function.
SILISIL Silicone Oils are high-purity linear polydimethylsiloxane (PDMS) liquids with a purity of 100%. Their viscosity of 0.65 cSt defines their range of applications—from lubrication and release agents to hydraulic functions and specialized care and industrial applications.
0.65 cSt is the lowest available PDMS viscosity—a short-chain hexamethyldisiloxane that evaporates quickly and completely after application. It is the standard choice as a volatile carrier in cosmetics, antiperspirants, and release agents.
What distinguishes SILISIL Silicone Oil 0.65 cSt
What is SILISIL Silicone Oil 0.65 cSt used for?
Important Notes
Which viscosity for which application?
SILISIL Silicone Oil 0.65 cSt in direct comparison with related viscosities in our product range.
Frequently asked questions about SILISIL Silicone Oil 0.65 cSt
Practical application and design questions — answered by SILITECH.
SILISIL Silicone Oil 0.65 cSt: Highly volatile silicone fluid (hexamethyldisiloxane) — evaporates without residue for cosmetics, release agent applications, and solvent function. Main applications include cosmetics & antiperspirants, fast-evaporating release agents, and volatile silicone solvents.
PDMS (polydimethylsiloxane) is a linear silicone fluid that combines high thermal stability, low surface tension, very good dielectric properties, and broad temperature resistance. The viscosity (measured in centistokes, cSt) determines the field of application — low viscosities are suitable for volatile applications and lubrication, high viscosities for damping and conditioners.
SILISIL Silicone Oils are soluble in aromatic, aliphatic, and chlorinated solvents (e.g., toluene, xylene, hexane, diesel). They are not miscible with water and alcohols. For anti-foam applications, high-viscosity PDMS is diluted in hydrocarbon solvents and introduced using a dosing pump.
Store in the unopened original container at room temperature (ideally below 60 °C). Avoid eye contact. SILISIL Silicone Oils are generally non-toxic, odorless, and tasteless — nevertheless, consult the Safety Data Sheet (SDS), which is available in the "Documents" tab.
Viscosity determines the application. 0.65 cSt is optimal for cosmetics, antiperspirants, and similar applications. For other application characteristics, you will find related viscosities in the comparison table above—if you are unsure, we will be happy to advise you on your specific application.