Knowledge Center | SILITECH

16 articles

Type: Guide ×

Conductive coatings and conductive paints: EDAG for printed electronics and ESD

Conductive coatings and conductive paints: EDAG for printed electronics and ESD. Conductive coatings, also called conductive paints, make surfaces electrically conductive. They are used to create printed electronics...

Industry: Electronics & Printed Circuit Boards Property: Electrically Conductive Brand: Henkel/Loctite Type: Guide World: Surface Treatment & Corrosion Protection

16.06.2026

0 5

Safely curing UV adhesives: curing chamber, dose and process control

Safely curing UV adhesives: Curing chamber, dose, and process control. Light-curing adhesives harden in seconds as soon as they receive the correct light in a sufficient dose. This makes them...

Industry: Electronics & Printed Circuit Boards Brand: Henkel/Loctite Type: Guide World: Processing & Dispensing Technology

16.06.2026

0 4

Cartridges, containers and connections: choosing the right 2K system

Cartridges, containers, and connections: choosing the right 2K system. 2K materials usually come in double cartridges. For successful dispensing and mixing, the cartridge, connection, mixer, and device must be compatible...

Industry: Mechanical Engineering & Manufacturing Type: Guide World: Processing & Dosing Technology

16.06.2026

0 5

Cleaning and degreasing before coating and bonding: choosing the right cleaner

Cleaning and degreasing before coating and bonding: choosing the right cleaner. Bonding and coating only work on clean surfaces. Grease, release agents, or particles prevent adhesion...

Brand: Henkel/Loctite Type: Guide World: Surface Treatment & Corrosion Protection

16.06.2026

0 5

Exothermic reactions during epoxy potting: Risks with large volumes

Exothermic reactions during epoxy potting: Risks with large volumes. Epoxy resins cure by releasing heat. In thin layers, this is harmless – in large potting volumes, the heat can build up and...

Industry: Electronics & Printed Circuit Boards Property: Chemical Resistant Brand: Elkem Type: Guide World: Processing & Dispensing Technology World: Potting & Electronic Protection

16.06.2026

0 4

Cracks in the potting compound: causes and material selection

Cracks in the potting compound: Causes and material selection. A cracked potting compound loses its protective function – moisture and other substances penetrate, and the mechanical support is lost. Cracks almost always have a cause...

Industry: Electronics & Printed Circuit Boards Property: Temperature Resistant Brand: Elkem Brand: SILISIL Type: Guide World: Processing & Dispensing Technology World: Potting & Electronic Protection

16.06.2026

0 3

Correctly dosing and mixing 2K: cartridge, static mixer and mixing ratio

Correctly dosing and mixing 2K: Cartridge, static mixer and mixing ratio. Two-component adhesives and potting compounds only cure completely when both components are mixed in the correct ratio...

Industry: Mechanical Engineering & Manufacturing Type: Guide World: Processing & Dosing Technology

15.06.2026

0 11

Potting vs. Encapsulation: Differences and Applications in Electronics | SILITECH

Electronic assemblies increasingly need to function reliably under extreme conditions. Whether moisture, dust, chemicals, or mechanical stress – the right protection is crucial for longevity and reliability. Two methods dominate: potting (full encapsulation) and...

Industry: Electronics & Printed Circuit Boards Type: Guide World: Potting & Electronic Protection

06.06.2026

0 582

Silicone Oil Guide: Viscosities, Applications and Selection (0.65 to 300,000 cSt)

Silicone oils (PDMS) are among the most versatile industrial chemicals available. They lubricate, separate, defoam, insulate, and protect – at temperatures ranging from -60 °C to +250 °C. But the range...

Type: Guide World: Silicones

07.04.2026

0 1427

Silicone for mold making: The complete guide. Material selection, processing, and error prevention

Are you planning your first mold-making project with silicone – or looking for a better solution for your series production? This guide explains how to choose the right silicone, avoid mistakes...

Industry: Art, Model & Mold Making Type: Guide World: Mold Making & Molding

07.04.2026

0 1518

Silicone rubber: The complete guide to types, applications and market developments 2026

What is silicone rubber and why is it so special? Silicone rubber is a synthetic elastomer material based on silicon, oxygen, carbon, and hydrogen. Unlike conventional...

Property: Temperature resistant Type: Guide World: Silicones

27.03.2026

0 522

Thermally conductive potting compounds: λ-values explained | SILITECH

Even the best heatsink is useless when power electronics overheat – unless the heat can escape from the encapsulated component. Thermally conductive potting compounds with a high λ-value do exactly that: They protect electronics from environmental influences while simultaneously dissipating waste heat.

Industry: Electronics & Printed Circuit Boards Property: Thermally Conductive Type: Guide World: Potting & Electronic Protection

24.02.2026

0 1098

1
2

What you will find here

On the SILITECH blog, we share in-depth expertise, technical background information, and practical examples to help you optimally utilize our products and sustainably improve your processes. Benefit from our know-how gained from over 25 years of industry experience.

Archive

Keywords

Industry: Construction & Building Industry: E-Mobility & Batteries Industry: Electronics & Printed Circuit Boards Industry: Energy & High Voltage Industry: Art, Model & Mold Making Industry: Mechanical Engineering & Industry Industry: Medical Technology Property: Biocompatible Property: Chemical Resistant Property: Electrically Insulating Property: Electrically Conductive Property: High Strength Property: Temperature Resistant Transparent : UV & Weather Resistant Property: Thermally Conductive Brand: Elkem Brand: Henkel/Loctite Brand: Merbenit Brand: Molydal Brand: Permabond Brand: SILIRESIN Brand: SILISIL Type: Application Type: FAQ Type: Guide Type: Fact Sheet Type: Comparison World: Mold Making & Molding World: Bonding & Sealing World : Surface Treatment & Corrosion Protection World: Lubrication & Separation World : Silicones World: Processing & Dispensing Technology World: Potting & Electronic Protection