PERMABOND 743 HT
Permabond 743 HT — anaerobic adhesive.
High-temperature cyanoacrylate with high flexibility — significantly increased peel, vibration and impact resistance, compensates for different thermal expansion
Documents
Internal reference:
49-743HT.FL.G020
HS code:
35069190
Permabond 743 HT is a high-temperature cyanoacrylate with high flexibility — significantly increased peel, vibration and impact resistance, compensating for different thermal expansion.
Permabond cyanoacrylate instant adhesives for demanding industrial applications — flexible, impact and vibration resistant, with extended temperature and substrate properties. 743 HT is tailored to specific applications — the most important properties and areas of application can be found below.
Permabond 743 HT combines high temperature resistance with flexibility — peel, vibration, and impact resistance significantly higher than standard CAs. Proven for multi-material bonding with differing thermal expansion.
What makes the 743 HT stand out
What is the 743 HT used for?
processing
Recommended accessories
743 HT in comparison
Direct comparison with related Permabond products in our range.
743 HT Current product |
AG 748 → | AG 743 CA Flex → | SH 623 → | |
|---|---|---|---|---|
| Chemical basis | Cyanoacrylate (flexible) | Cyanoacrylate (gel, flexible) | Cyanoacrylate (flexible) | Permabond Special |
| viscosity | thixotropic | thixotropic gel | see TDS | see TDS |
| Grade | Industrial | Industrial | Industrial | Industrial |
| Color | colorless | colorless | colorless | see TDS |
| SetTime | see TDS | see TDS | see TDS | see TDS |
| Full Cure | 24 h | 24 h | 24 h | see TDS |
| Main application | High temperature + flexible | Gel bonding vertical | Flexible CA Industry | Specialty industry |
Technical data for PERMABOND 743 HT
| Product information | |
|---|---|
| brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Chemical basis | cyanoacrylate |
| Container | 20 g |
| Performance at final strength | |
|---|---|
| Elongation at break (elasticity) (ISO37) | 300-400% |
| Physical properties | |
|---|---|
| Color | colorless |
| Viscosity 20rpm | 2000-5000 |
| Viscosity 2rpm | 10000-20000 |
| Specific gravity | 1.1 |
| Hardness (Shore A) | 60 |
| Curing values | |
|---|---|
| Maximum gap width (mm) | 0.3 |
| Rubber's hand strength (sec.) | 5-10 |
| PC hand strength (sec.) | 10-20 |
| EPDM hand strength (seconds) | 20-30 |
| Silicone hand strength (sec.) | 2-5 |
| ABS hand strength (sec.) | 5-10 |
| PVC hand strength (seconds) | 2-5 |
| Steel hand strength (sec.) | 2-5 |
| Handling strength of aluminum (sec.) | 30-40 |
| Final strength | 24 hours |
| Shear strength ISO 4587 in N/mm² | |
|---|---|
| Steel | 1-2 N/mm² |
| aluminum | 1-2 N/mm² |
| PC | 4-6 N/mm² |
| Acrylic | 1-2 N/mm² |
| ABS | 2-4 N/mm² |
| Thermal properties | |
|---|---|
| Storage temperature (°C) | 2-7 |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Documents and datasheets
Click on a document for a preview or the download icon for a direct download.
Technical Data Sheets (TDS) 3
Frequently asked questions about 743 HT
Practical application and design questions — answered by SILITECH.
Permabond 743 HT: High-temperature cyanoacrylate with high flexibility — significantly increased peel, vibration, and impact strength, compensates for differential thermal expansion. Main applications: Multi-material bonding with thermal expansion, vibration-stressed bonding, high-temperature industrial applications.
Flexible cyanoacrylates contain modifiers that, after curing, result in an elastic rather than a brittle, rigid adhesive bond. Advantages include significantly higher peel, impact, and vibration resistance, as well as tolerance compensation between substrates with different thermal expansion. Standard cyanoacrylates are susceptible to brittle fracture under these stresses—flexible variants withstand them much better.
Store in the unopened original container in a dry, cool place — Permabond adhesives typically between +5 and +25 °C, see TDS for exact values. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store cyanoacrylates in a cool place (ideally refrigerated) for maximum shelf life.
The comparison table above lists related Permabond products with different properties—viscosity, mixing ratio, special certification. If you are unsure which product is best, we would be happy to advise you—contact SILITECH with your specific application (substrate pairing, load, curing conditions).
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Product information | |
|---|---|
| brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Chemical basis | cyanoacrylate |
| Container | 20 g |
| Performance at final strength | |
|---|---|
| Elongation at break (elasticity) (ISO37) | 300-400% |
| Physical properties | |
|---|---|
| Color | colorless |
| Viscosity 20rpm | 2000-5000 |
| Viscosity 2rpm | 10000-20000 |
| Specific gravity | 1.1 |
| Hardness (Shore A) | 60 |
| Curing values | |
|---|---|
| Maximum gap width (mm) | 0.3 |
| Rubber's hand strength (sec.) | 5-10 |
| PC hand strength (sec.) | 10-20 |
| EPDM hand strength (seconds) | 20-30 |
| Silicone hand strength (sec.) | 2-5 |
| ABS hand strength (sec.) | 5-10 |
| PVC hand strength (seconds) | 2-5 |
| Steel hand strength (sec.) | 2-5 |
| Handling strength of aluminum (sec.) | 30-40 |
| Final strength | 24 hours |
| Shear strength ISO 4587 in N/mm² | |
|---|---|
| Steel | 1-2 N/mm² |
| aluminum | 1-2 N/mm² |
| PC | 4-6 N/mm² |
| Acrylic | 1-2 N/mm² |
| ABS | 2-4 N/mm² |
| Thermal properties | |
|---|---|
| Storage temperature (°C) | 2-7 |
| Keywords | |
|---|---|
| Keywords | |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download:
- Permabond 743 HT - Technical Data Sheet FR.pdf (275 KB)
- Permabond 743 HT - Fiche de Sécurité FR.pdf (331 KB)
- Permabond 743 HT - Safety Data Sheet EN.pdf (310 KB)
- Permabond 743 HT - Safety Data Sheet DE.pdf (332 KB)
- Permabond 743 HT - Technical Data Sheet EN.pdf (305 KB)
- Permabond 743 HT - Technical Data Sheet DE.pdf (316 KB)