)
PERMABOND ET522 A
Permabond ET522 2K epoxy — Component A (resin) Single pack
Permabond ET522 Component A (resin) — Single pack of the 2K epoxy system.
Documents
Internal reference:
49-522A.DO
Permabond ET522 A is the resin component of the 2K epoxy system ET522 — it is used in conjunction with ET522 component B for complete bonding.
This single pack contains only the resin component (A) of the 2K epoxy ET522. The corresponding hardener component (B) is available separately as Permabond ET522 B.
The separate delivery of components is relevant for applications where there are unequal consumption quantities or where one of the components needs to be replaced separately.
Permabond ET522 Component A — Single pack of resin. When used in conjunction with ET522 Component B (hardener), it forms a complete 2-component epoxy system. Single packs are generally only practical when ordering both components.
What distinguishes Permabond ET522 A
What is Permabond ET522 A used for?
processing
Recommended accessories
Important instructions
Which Permabond 2K epoxy is suitable for which application?
Permabond ET522 A in direct comparison with related products of the ET series.
Permabond ET522 A Current product | Permabond ET522 B → | Permabond ET514 → | Permabond ET536 → | |
|---|---|---|---|---|
| Application / Property | ET522 — Component A (resin) | Hardener component | A + B in the package | A + B in the package |
| Mixing ratio | — | — | 1:1 | 1:1 |
| Potting time | — | — | 30–50 min | 50–80 min |
| Steel shear strength | — | — | 20–30 N/mm² | 22–32 N/mm² |
| carbon fiber | — | — | 17–21 N/mm² | 18–22 N/mm² |
Technical data for PERMABOND ET522 A
| Product information | |
|---|---|
| brand | Permabond |
| Container | 1 kg, 5 kg |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Frequently asked questions about Permabond ET522 A
Practical application and design questions — answered by SILITECH.
Permabond ET522 A is a single component of a 2K epoxy system — see category for the corresponding counter-component. Permabond ET522 Component A (resin) — single pack of the 2K epoxy system.
No. Two-component epoxies only harden when the resin (A) and hardener (B) are mixed in the correct ratio. A single component remains liquid and does not harden.
When consumption levels are unequal, a component needs to be replaced, or there is a specific procurement requirement, the complete system is usually recommended.
The mixing ratio is specified in the technical data sheet of the master system. Please consult the master TDS or contact SILITECH before processing.
Store at 5 to 25 °C in the original, unopened packaging. Protect hardener components especially from moisture.
From the Permabond 2K epoxy range, select according to application, mixing ratio, and strength requirements: Permabond ET522 A (ET522 — Component A (resin)); Permabond ET522 B (Component B); Permabond ET514 (Complete 2K system); Permabond ET536 (Complete 2K system). For aerospace applications, see ET515 (Aircraft Seat Trays); for food applications, see ET5162 (EU 10/2011 + FDA); for thermal conductivity/fire protection, see ET5441 (UL94-V0).
SILITECH-Vertrieb is available for application advice — we clarify mixing ratios, processing instructions and suitability for use.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Container | 1 kg or 5 kg |
| brand | Permabond |
| Keywords | |
|---|---|
| Keywords | |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download: