Silicones, silicone oils, sprays
Casting and potting resins)
)
Technical Data
Typical values, not a specification. The technical data sheet (TDS) is binding.
Product Information
- Manufacturer
- Permabond Engineering Adhesives Ltd
- Brand
- Permabond
- Container
- 30 g, 500 g
- Country of origin
- Italy
- UFI (Unique Formula Identifier)
- T170-F02F-U00Y-WXY7
Performance at Full Cure
- Impact strength (ASTM D-950)
- 3-5 kJ/m²
Physical Properties
- Color
- colorless
- Chemical group
- Ethyl Cyanoacrylate
- Viscosity (adhesives)
- Medium viscosity 500 - 5000 mPas
- Viscosity mPa.s
- 1200-2400
Curing values
- Maximum gap fill (mm)
- 0.38
- Fixture time on steel (sec.)
- 15
- Hand Strength Rubber (sec.)
- 15
- Hand Strength Phenol (sec.)
- 15
- Final strength
- 24 hours
Mechanical properties
- Hardness (Shore D)
- 85
Shear strength ISO 4587 in N/mm²
- Steel
- 20-22
Thermal Properties
- Storage Temperature (°C)
- 2-7
- Coefficient of thermal expansion
- 90 x 10-6 mm/mm/°C
Product Description
Permabond 4C30 is a medium-viscosity medical device grade cyanoacrylate for medium gaps — fast-curing, ideal for automated dispensing with robots and static mixers.
Permabond cyanoacrylate instant adhesives in medical device quality — biocompatible (ISO 10993), solvent-free reactive, crosslink within seconds through surface moisture between the parts to be bonded. 4C30 is tailored to specific applications — the key properties and areas of use are listed below.
Permabond 4C30 is a medium-viscosity variant in Medical-Device-Grade — reliably fills medium gaps, cures quickly, and is ideal for automated dispensing systems.
What sets 4C30 apart
What is 4C30 used for?
Processing
Recommended accessories
4C30 in comparison
Direct comparison with related Permabond products from our range.
4C30 Current Product |
4C10 → | 4C40 → | 4UV80HV → | |
|---|---|---|---|---|
| Chemical Base | Cyanoacrylate (ethyl ester) | Cyanoacrylate (ethyl ester) | Cyanoacrylate (ethyl ester) | Methacrylate ester |
| Viscosity | Medium Viscosity | low viscosity | high viscosity | high viscosity, opaque |
| Grade | Medical Device | Medical Device | Medical Device | Medical Device (ISO 10993-5) |
| Color | colorless | colorless | colorless | opaque |
| Set Time | ~30 s | <10 s (typical) | ~60 s | UV Cure (sec.) |
| Full Cure | 24 h | 24 h | 24 h | UV-cured |
| Main application | Auto-dispenser, middle column | Hard-to-bond rubbers | Large gap + POM | UV Medical Device |
Frequently asked questions about 4C30
Practical application and design questions — answered by SILITECH.
Permabond 4C30: Medium-viscosity medical device grade cyanoacrylate for medium gap filling — fast curing, ideal for automated dispensing with robots and static mixers. Main applications: Automated medical device assembly, medium gap filling, static mixer processing.
Medical-Device-Grade cyanoacrylates meet elevated purity standards for medical applications — typically ISO-10993 tests (biocompatibility, cytotoxicity). They have the same instant-curing chemistry as standard CAs (cross-linking via surface moisture), but with controlled purity of ingredients for use in medical devices with patient contact or in pharmaceutical products.
Store in the unopened original container in a dry, cool place — Permabond adhesives typically between +5 and +25 °C, exact values see TDS. Consult the Safety Data Sheet (SDS) before use. Observe the expiry date on the packaging. Store cyanoacrylates cool (ideally refrigerated) for maximum shelf life.
In the comparison table above, you will find related Permabond products with different properties — viscosity, mixing ratio, special certification. If you are unsure about the optimal choice, we will be happy to advise you — contact SILITECH with your specific application (substrate pairing, load, curing condition).