)
)
PERMABOND A 905 Spray
Permabond A 905 Spray — Activator/Initiator.
Spray activator for anaerobic adhesives — accelerates curing on stainless steel, zinc and aluminum.
Documents
Internal reference:
49-225.SP
HS code:
35069190
Permabond A 905 Spray is the aerosol version of the surface activator A905 — same effect as an accelerator of anaerobic adhesives on inactive surfaces, but more convenient to use in inaccessible places or large areas.
The spray form simplifies the even application of the activator—for example, on inaccessible screws, in deep bores, or on large sealing surfaces. The chemical composition is the same as the liquid version: rapid evaporation, minimal residue, and compatibility with all anaerobic Permabond adhesives.
The spray application also allows for the targeted activation of specific areas without having to treat the entire adhesive surface — an advantage in selective repair or maintenance operations.
Spray version of Permabond Activator A905 — same chemistry as the liquid, but as an aerosol for convenient and even application in hard-to-reach places or large areas. Activates Permabond anaerobic adhesives on inactive surfaces.
What distinguishes Permabond A 905 Spray
What is Permabond A 905 Spray used for?
processing
Recommended accessories
Important instructions
Which Permabond anaerobic adhesive is suitable for which application?
Permabond A 905 Spray in direct comparison with related products of the A series.
Permabond A 905 Spray Current product | Permabond A905 → | Permabond Cleaner A Aerosol → | Permabond A011 → | |
|---|---|---|---|---|
| Application / Strength | Surface activator (aerosol) | Liquid variant for high volumes | Degreaser, not an activator | Adhesive (instead of activator) |
| viscosity | 0.7 mPa·s | Fluid | Aerosol | 500 mPa·s |
| Maximum gap filling. | — | — | — | 0.12 mm |
| Breakaway torque | — | — | — | 4 N·m |
| Further torque | — | — | — | 5 N·m |
Technical data for PERMABOND A 905 Spray
| Product information | |
|---|---|
| brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Container | 200 ml |
| Country of origin | Italy |
| Flash point | -4°C |
| UFI (Unique Formula Identifier) | 38N0-D0CM-1006-SHQ5 |
| Physical properties | |
|---|---|
| Color | green |
| Viscosity (adhesives) | 0.7 mPa·s |
| Specific gravity | 0.7 |
| boiling point | 45-100°C |
| Evaporation rate | 7.7 |
| Thermal properties | |
|---|---|
| Storage temperature (°C) | 5 to 25°C |
For binding values, please refer to the technical data sheet (TDS) in the "Documents" tab.
Documents and datasheets
Click on a document for a preview or the download icon for a direct download.
Technical Data Sheets (TDS) 3
Frequently asked questions about Permabond A 905 Spray
Practical application and design questions — answered by SILITECH.
Permabond A 905 Spray is a surface activator for use with anaerobic Permabond adhesives — it accelerates curing on inactive surfaces such as stainless steel, zinc, or aluminum and improves gap curing in cases of coarse tolerances. Surface activator spray for anaerobic adhesives — convenient aerosol application.
Apply A 905 Spray thinly and evenly to ONE of the two bonding surfaces. Allow to evaporate completely (a few seconds to minutes). Then apply the anaerobic adhesive to the UNTREATED bonding surface. Do not mix the activator and adhesive directly—this will cause premature curing.
A 905 Spray is compatible with the entire anaerobic Permabond A range — threadlockers (A011, A113, A126, A130, A025, A131, A134, A118), shaft-hub adhesives (A1042, A1046, A1062), thread sealants (A129, A1044, A1058) and surface sealants (A136). A 905 Spray has no activating effect on other adhesive types (cyanoacrylates, epoxides, UV acrylates).
A 905 Spray is particularly effective on inactive surfaces—stainless steel, zinc (galvanized steel), aluminum, and some coatings. On steel, copper, and their alloys, anaerobic curing is rapid even without an activator. Its use is also beneficial at low ambient temperatures or with large adhesive gaps.
Permabond offers A905 as a liquid (for high-volume processing, dipping, and rag application) and as an A905 spray (aerosol, for selective or hard-to-reach areas). The chemistry is identical—the choice depends on the application method.
When stored correctly at 5 to 25 °C, A 905 Spray is stable until the printed expiration date. Since the product contains solvents, keep the bottle tightly closed; otherwise, evaporation will occur and the effectiveness will decrease.
A 905 Spray contains solvents (flash point −4 °C) — risk of fire and deflagration. Use only in well-ventilated areas, away from open flames, sparks, and hot surfaces. Avoid eye and skin contact; refer to the SDS for complete safety data.
Your question isn't listed here
Our technical team will advise you personally on material selection, processing questions, and individual requirements. Quickly and competently.
Product specifications
| Product information | |
|---|---|
| brand | Permabond |
| Manufacturer | Permabond Engineering Adhesives Ltd |
| Container | 200 ml |
| Country of origin | Italy |
| Flash point | -4°C |
| UFI (Unique Formula Identifier) | 38N0-D0CM-1006-SHQ5 |
| Physical properties | |
|---|---|
| Color | green |
| Viscosity (adhesives) | 0.7 mPa·s |
| Specific gravity | 0.7 |
| boiling point | 45-100°C |
| Evaporation rate | 7.7 |
| Thermal properties | |
|---|---|
| Storage temperature (°C) | 5 to 25°C |
| Keywords | |
|---|---|
| Keywords | |
Documents and datasheets
Safety Data Sheets (SDS) and Technical Data Sheets (TDS) are available for download:
- Permabond A 905 Spray - Technical Data Sheet FR.pdf (252 KB)
- Permabond A 905 Spray - Fiche de Sécurité FR.pdf (401 KB)
- Permabond A 905 Spray - Safety Data Sheet EN.pdf (397 KB)
- Permabond A 905 Spray - Safety Data Sheet DE.pdf (402 KB)
- Permabond A 905 Spray - Technical Data Sheet EN.pdf (293 KB)
- Permabond A 905 Spray - Technical Data Sheet DE.pdf (295 KB)